Question about 2006 Nissan Murano
Posted by Anonymous on
You will need the dealer on this, sorry but there is substantial testing needed to correct this malfunction, this testing requires special tools that only the dealer will have..
Posted on Dec 28, 2016
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
To get the remote start going again, I remembered a time when my Explorer phob would not open the doors automatically, I was told to insert the key and toggle it from off to "run" (not starting it, but having the radio and lights come on) position about 4 - 5 times to reset it. I tried that with the car, and it worked!!
Posted on Jan 27, 2009
No, its a Auto-Anti-Theft Unit, your best bet would be to buy a $100 kit from auto zone. The Stick unit is built that way because if you start it and walk away, I can use a blank key to unlock the ignition and drive off.
Posted on Aug 18, 2009
I assume you've checked all connections from the battery and starter to make sure they are clean and tight. It is a little weird that you do not have trouble starting in neutral yet you get a clicking sound in park. My first thought would be the neutral safety switch on the transmission but you shouldn't even get a click in park if that is bad.
One possibility is the contacts in your starter have worn down and are causing too more resistance (explains the clicking). At the back of your starter is a metal cover that is held on by three tiny bolts (6mm). Disconnect the battery first! (You might have to remove the starter to get to this part) Remove this cover and pull out the plunger assembly. Underneath are two brass plates. Compare one plate to the other. If one is noticeably thinner then it could be the cause of the clicking. You will even see a round groove in the plate. You can buy the plunger and contacts from this website: http://www.nationsautoelectric.com/densoparts.html or you can opt to get a starter from your friendly auto parts store. The first picture shows the bad contact on the left. Notice the groove, the metal has become really thin there. This picture shows a pitted plunger assembly. Always good to replace it too.This picture shows all the new parts installed.
Posted on Aug 20, 2009
no dont think its the magic relay but more like the immobilisor ,is their any security light flashing on the dash somewhere ,try locking and unlocking the door with the key three times then try to start within 15 secs .if this doesnt work it could be the brake light switch if its an auto ,Not sure what you mean by the click. Without having the vehicle in front of me its difficult to tell you exactly what to look for
Posted on Dec 24, 2009
Tips for a great answer:
Nov 02, 2016 | 2006 Nissan Murano
Oct 24, 2015 | 2006 Chevrolet Trailblazer
Mar 02, 2015 | 2006 Nissan Murano
Apr 10, 2013 | 1996 Ford Thunderbird LX
My guess is that whether you know it or not, apparently your truck has a remote starter system. Those systems will start your car and run it until you insert the key and turn it to run. Usually there is a limit to how long the car will run on the remote start but some systems may not have that feature. If you have the key fob that starts it, you might have a battery going dead or some kind of interference activating it. I have left the obvious unsaid, (you might be hitting the button while it's in your pocket). If you have no fob... perhaps a neighbor has the same frequency on their starter, or you have a demon possessed truck and are in need of an exorcist. :-)
Oct 01, 2012 | 2005 Volkswagen Jetta
Mar 28, 2011 | 2006 Pontiac G6
Feb 25, 2011 | 2007 Chevrolet Tahoe
Sep 30, 2017 | 2006 Chevrolet Malibu
Mar 23, 2009 | 2006 Chevrolet Colorado
29 people viewed this question
Usually answered in minutes!