Question about Cars & Trucks

Open Question

Starting 1987 gas Club Car With the ignition on (neutral defaulted)generally the Club Car will not start until I giggle two wires facing rear to the right if the starter/generator.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 39 Answers

SOURCE: problem with ignition switch, starter, flywheel

that sounds correct what happens is the starter still tries to engage the flywheel and grinds the teeth off both. Replace switch then worry about starter flywheel if it starts fine don't worry about it you may have saved it if you didn't let it run that way long

Posted on Dec 24, 2008

Ad
  • 1118 Answers

SOURCE: starting problem, starter doesn't enguage. good starter, battery, celinoid, ignition lock, flex plate.

Have you chk. the starter switch on the steering colume under dash? Or is starter drive kicking in but not engaging teeth in flexplate? If its not engaging teeth on flexplate starter needs to be shimmed, or if its missing the teeth altogether on flexplate or bearly catching the teeth, top of starter nose wear it bolts up needs to be filed down to engage the teeth on flexplate.

Posted on Apr 19, 2009

warlock61
  • 659 Answers

SOURCE: wiring diagram

battery and all fuse links on one post of the solenoid and starter cable on other

Posted on Jul 18, 2009

  • 484 Answers

SOURCE: need wiring diagram for 2000 dodge neon

i would recommend buying a Haynes manual, as they have very good diagrams and schematics. If you do not want to buy one, though, you can create an online garage on Autozone.com by registering (which is free) and add your car to the garage to get access to a free manual online. These manuals are kind of hit-or-miss, though, and i have had mixed results with them. But for free, it is worth looking into first.

i hope this helps,
matthew

Posted on Oct 25, 2009

  • 507 Answers

SOURCE: 2000 Chevy Tahoe Won't Start

ignition switch is where I would start.

Posted on Jan 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I drive a 95 Lumina. I have brought a brand new battery, alternator and starter, but it doesn't turn over. It doesn't even start with a jump. When ever the anti-lock light comes on my car doesn't start....


According to your wiring diagram, the ABS is not related to the starting circuitry. The only switches involved are the ignition, safety interlock, and anti-theft (if equipped). Recommend you try starting in neutral or giggle the shifter in park. Also, it is possible you are mistaking the security light for the ABS light?
Do you have a resistor on your key (black thing on the blade with a wire going across)? If so, check fuse 11.

b3c8ecc.gif

Sep 27, 2010 | 1995 Chevrolet Lumina

3 Answers

Engine won't turn over, no clicking or anything. Total silence. Battery terminals have been cleaned, battery is newer...... when ignition is turned on, air conditioning runs, lights do not dim, radio works...


try giggling the shifter or starting it in neutral--possible interlock switch failing. Also could be your anti-theft system--try using other factory key

Sep 06, 2010 | 1995 Chevrolet Camaro

1 Answer

My speedometer,Tach, Gas guage, temp guage, windows all lost.


That smoke came from some wires that shorted and melted. Take the car immediately to a shop and fix the wiring loom, it can burst into flames at any minute now.

Jul 02, 2010 | 1995 Honda Accord

2 Answers

This car has been sitting without use for about 2 years. What should I do to get it running


first check oil water, air filter, check every thing, turn the key once to see if the motor will turn over. if it does try and start it, if it does not start remove air filter lid, spray starting fld inside, try starting again. if it does not start, pull off one plug wire, put a screw driver inside of wire to make contact with the metal part of the wire. than set the screw driver near a metal part of the car. you are now checking for a spark, have some one try to start the car. while u r watching for a spark from the screw driver the the matel part of the car. if not spark, check coil. if there is a spark. check for the ignition fuse. if fuse is good. now check for gas. remove the rule line have some one crank the car over. (DO NOT FACE THE LINE TOWARDS YOUR FACE) should have gas coming out. if not fuel, check the pump filter clogged lines. if there is gas put line back on. prime it while some one is cranking the car over.

Mar 14, 2010 | 1987 Mercedes-Benz Mercedes Benz 190 Class

1 Answer

My 99 toyota camry has problems starting when it rains or snows. Any other time it works just fine. I normally hold down the gas pedal and turn the ignition key over till it starts, may take some time if...


  • One issue try to check the heater of your car thats why sometimes when it rains your having problems starting it or if the heater is not busted check the fuse and the wires. For saftey visit a good electrician and mechanic.

Feb 09, 2010 | 1987 Toyota Pickup

1 Answer

1995 DODGE CARAVAN worked perfectly until recently


you need to replace the neutral starting switch on the transmission,it is a screw in type and has a connector with three wires on it,or start your van in neutral.

Jan 02, 2010 | 2001 Pontiac Aztek

2 Answers

2001 Dodge Dakota Ignition Problem or Battery?


i would recommend replacing the terminals. but before doing that tighten the ones that are on there as much as possible. if that doe not solve it then replace the terminals and make sure it is tight on the battery. if thats not it, then make sure the battery is the correct one for the car. and the deal with the key could possibly the tumbler, or it could be that the steering wheel is locked and needs to be shimmied back and forth to start it. if this does not help please repost.

Jan 01, 2010 | 2001 Dodge Dakota

1 Answer

Car wont start, turns over fine but theres no feed of gas to carb


take your distributor cap off and check the ignition module for loose wires or even a ground strap thats connected to the engine to the body , you can take the module to autozone and have it checked for free, it might have a crank position sensor thats going wacky

Aug 19, 2009 | 1987 Chevrolet Blazer

1 Answer

1987 Cavalier keeps stalling and i have a difficult time starting


The stalling out part makes me want to say you have a bad Torque Converter Clutch lock up solenoid. ( TCC ) They are notorious for that.
A quick and dirty fix is to simply unplug them. It wont really harm anything unplugging it but unplugging it will make the car run a tad bit warmer and your gas mileage will suffer by about 10 mpg.
( I had to do the same thing last summer )

The no spark makes me want to say check the coil pac, ignition module under the coil pac, and the crank position sensor under the coil pac / ignition module assembly which is mounted in the block. All are located centrally on the rear of the engine under the intake manifold. You will likely need to reach them from under neath.

Mar 03, 2009 | 1987 Chevrolet Cavalier 4 Door

2 Answers

1994 Honda Accord EX 5-sp won't start


Recheck those cable connections. Gotta be a loose wire or battery cable connection. Especially when you get nothing when you put key in ignition.

Feb 20, 2009 | 1994 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...