Question about Jaguar X-Type

Open Question

2004 xjr key I cant lock and unlock right away it take 15 minutes to work again I have replaced the battery reprogramed the fob all with success but still cant lock and immediately unlock the car

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

blueextc3221
  • 15935 Answers

SOURCE: remote key fob will not work-battery replaced

VW/AUDI/SEAT/SKODA



Remote Control Programming (1997 ON)

Procedure
1. Switch Ignition ON and leave the key in the ignition.

2. Mechanically lock the vehicle using the Drivers door using a second
key.

3. Using the remote control press the Unlock button once, and the horn
will sound once.

4. Wait 6 seconds and press the unlock button once to activate the coding
procedure. The remote control will now be programmed.

NOTE : When performing programming on additional remotes the procedure
is the same, except you press the unlock button 2, 3 or 4 times for the
different remote.

For example : If programming 2 remotes press the unlock button twice with
a 1 second interval between each press, repeat for 3 and 4 remotes.

5. Switch Ignition OFF.

6. Remove key from ignition and check for operation.

7. The coding procedure can be repeated up to 4 times for additional remotes.

8. The ignition must be switched OFF between programming each remote
control.

Remote Control Erasing (1997 ON)

Procedure
1. Switch Ignition ON and leave the key in the ignition.

2. Mechanically lock the vehicle using the Drivers door using a second
key.

3. Press the remote control unlock button 5 times in 1 second intervals.
A short horn will sound.

4. Wait 6 seconds and press the unlock button once to activate memory
erase.

5. Switch ignition OFF, all remotes are now erased.

Posted on Dec 24, 2008

  • 1 Answer

SOURCE: car key fob not working and locking car

i have a rover 25 and the key fob is not opening the car i could use the key to open it but the alarm will go off and cant stop it without the fob...

Posted on Apr 11, 2010

roniecon
  • 6826 Answers

SOURCE: how do you re-link the key fob to the car after

Try this,,turn the key on ,wait 10 minutes,then turn the key off,then right back on,do this three times,a total of 30 minutes,this should reset the key fob,if this is the problem.

Posted on Apr 17, 2010

psycodelek
  • 202 Answers

SOURCE: anti theft will not turn off, motor will not start

Disconnect the battery to the vehicle for 15 minutes and while disconncted change the battery in your key fob. Good Luck.

Posted on Dec 06, 2011

emissionwiz
  • 75235 Answers

SOURCE: KEY FOB

ATTENTION: You MUST HAVE one working remote to add one more to the system. If you do not have one working remote right now then these instructions will not work. You will have to have a Locksmith or dealership use a computer to program the first remote for you.

Click here to find a Locksmith in your area to program this remote.
1. Enter your vehicle and close all doors.

2. Fasten your seat belt ( fastening the seat belt will cancel any chiming that may
confuse you during this programming procedure.)

3. Place key into the ignition.

4. Turn the ignition to the ON position ( DO NOT START THE ENGINE )

5. Press and hold the UNLOCK button on a working remote.


6. Continue to hold the UNLOCK button, wait at least 4 seconds, but no longer than
10 seconds, then press and hold PANIC button.

7. When a single chime is heard, release both buttons. The chime indicates the system
is in program mode.

8. Press and release both the LOCK and UNLOCK buttons, simultaneoulsly on the remote
to be programmed.


9. A single chime will be heard. The chime indicates the the remote was recognized.


10. Within 4 seconds of hearing the chime, press and release any button on the remote
being programmed.

11. A single chime will be heard The chime indicates the remote has been programmed.

12. Repeat steps 8 to 11 for a total of 4 remotes.

13. Turn the ignition to the OFF position or wait 60 seconds to exit program mode.

Posted on Jul 02, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 Buick Lucern. Key fobs will not lock/unlock car. Have reprogrammed them. Once car is unlocked by key you can lock/unlock car while in it. Once out & locked 5 minutes later won't do anything


Hi Jill:
We just spent $1000 Canadian at the Buick dealer having trouble shooting and repairs done on our 2006 Terraza.
One of the remotes had an internal broken circuit.

Had to replace the Body Control Module on the AZTEK.
Kissed another $1,000 goodbye.
Selling it.

Frankly, as long as they are working it's fine, but when they start to have problems, it is completely beyond the scope of THIS Fixya ****** to diagnose or attempt to repair.
Makes me want to sell and NEVER get another GM.
Best of luck.

Jul 10, 2016 | 2007 Buick Lucerne

2 Answers

I just had to have battery replaced in 08 cobalt, now keyless entry will not work, had batteries replaced in both fobs, neither is working. Cant arm the alarm at all, have to manual unlock doors, and...


key in ignition 2 number 2 then press the fob. till doors lock. 2 to 3 times then unlock with fob. turn back key lock car. then un lock. then do the same with the other fob.

Feb 22, 2014 | Cars & Trucks

1 Answer

Central locking


When you replace the batteries in a key fob you usually have to reprogram (kind of a sync) the fob to the car. Each manufacturer is different and usually involves turning the key over a certain number of times ( like 8) then operating the fob in a certain way like holding the lock button down for three or so seconds. I found out how to do mine on YouTube

Jan 02, 2014 | 2008 Toyota RAV4

1 Answer

I cannot lock or unlock my car with my key fob


Test the battery inside key fob, should be at 3 volts, if is less than 3 volts replace the battery. If that does not work you may need to replace the key fob, on this vehicle you can program the key fob through the radio, the car manual shows you how to do this.

Before replacing the old key fob you can try to resinc the fob to the car by pressing the lock and unlock buttons at the same time for about 15 sec, if the door locks cycle the the fob will work again.

Mar 02, 2013 | 2004 Chevrolet Impala

1 Answer

My wife had her purse stolen with one of the 2008 Expedition Keys and FOB's. How do I deprogram the keys and Fobs and reprogram just the ones I still have?


get two new fob e-bay is cheap or dealer cycle key from off to run NOT CRANK JUST TILL LIGHT COME ON . do that 8 times you door lock will lock then unlock this is key fob reprograming mode press unlock on fob door lock will cycle up and down then press unlock on other fob door lock will cycle again now start truck and shut off. test each fob.

when you reprogram the new fobs the other ones will not work

hope that helps

Jan 30, 2013 | 2008 Ford Expedition Eddie

1 Answer

Anti theft will not turn off, motor will not start


Disconnect the battery to the vehicle for 15 minutes and while disconncted change the battery in your key fob. Good Luck.

Dec 05, 2011 | 2004 Mazda Tribute

3 Answers

Door locks dont operate with remote key fob


Touch Key metal to lock cylinder metal then unlock

Jul 29, 2008 | 2001 BMW 325

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...