Question about Cars & Trucks

1 Answer

2004 xjr key fob works but if i lock the doors and try to unlock with the fob right away it wont work for 15 minits or so why is the locking system timed?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 2,179 Answers

Try replacing the battery in the fob

Posted on Dec 20, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2004 Chevy key fob won't unlock the car doors....the lock button works just not the unlock. I replaced battery, try to clean the connections but it still doesn't work. What else can I try?


Open the key fob,behind the plastic pad put smalls aluminum foil
in between the pad and the circuit board of the key fob put separate in each hole close the fob and try

Apr 10, 2014 | 2004 Chevrolet Malibu Maxx

1 Answer

Bmw drivers door only wont lock/unlock with key fob


Could be your driver door lock mechanism that is going bad , since the other door are working, it cannot be the fob. I would try to change the driver side door latch mechanism.

Apr 02, 2014 | 2008 BMW 320i Automatic

1 Answer

I have a 2004 Honda Civic LX Sedan. My problem with it is one, where you put the in to unlock the car,driver side, won't turn. I know the problem is the key lock cylinder itself, one of the tumblers wont...


To fix the tumblers, find a trusted locksmith. That's the way I'd go. Honda does have a kit, but, it's not a consumer one. You'd spend a decent amount of money on a kit that would fix hundreds of cars, so, that's why they won't sell it to you.

As for the key fob, have you tried putting a new battery in it? Your description is not very clear. The LX should have come from the factory with a key fob. So, if you got one, make sure it's the correct one with a good battery. To program it, put your key in the igntion, turn the key to position 2 (the position right before you start the car), press a button on the key fob, turn the key back to position 0, Repeat these steps over and over (about 4 to 5 times) until the doors lock/unlock. If that doesn't work, you could have a bum transmitter.

If some doors are not lock/unlocking, chances are bad doorlock acuators.

Sep 12, 2013 | 2004 Honda Civic

1 Answer

05 dakota doors lock with fob but won't unlock with fob


Your FOB has gone bad. Try your other FOB just to make sure and let me know ....

Apr 14, 2013 | 2004 Dodge Ram 1500

1 Answer

I cannot lock or unlock my car with my key fob


Test the battery inside key fob, should be at 3 volts, if is less than 3 volts replace the battery. If that does not work you may need to replace the key fob, on this vehicle you can program the key fob through the radio, the car manual shows you how to do this.

Before replacing the old key fob you can try to resinc the fob to the car by pressing the lock and unlock buttons at the same time for about 15 sec, if the door locks cycle the the fob will work again.

Mar 02, 2013 | 2004 Chevrolet Impala

1 Answer

Doors dont lock with secrity fob


The receiver for the fobs is located in the rear hatch, and it needs to be reprogrammed to the fobs. Try the following procedure;

1. Close all the vehicle doors.
2. Insert the ignition key into the ignition lock cylinder.
3. Press and hold the door unlock switch.
4. While holding the door lock switch in the unlock position, cycle
the ignition ON, OFF, ON, OFF.
5. Release the door unlock switch. The doors will lock and unlock to
confirm the program mode.
6. Press and hold the LOCK button and the UNLOCK button
simultaneously on one transmitter. After a delay of approximately 15
seconds, the doors will lock and unlock to confirm the programming of
that transmitter.
7. Repeat the previous step to program up to four transmitters.
8. Turn the ignition switch to the RUN position in order to exit the
keyless entry transmitter mode.
9. Operate the transmitter functions in order to verify correct
system operation.

Sep 05, 2012 | 2004 Chevrolet TrailBlazer

1 Answer

I changed the lock actuator on my 2004 mitsubishi endeavor, but the key fob will not work on that door


check the wires in the rubber boot between the door pillar and the door for a break in the wire or loose plug socket ,check for a feed to the lock with a multimeter as well whilst operating the system as i think this is your problem here -no power

Feb 25, 2012 | 2004 Mitsubishi Endeavor

1 Answer

I have a 2004 Honda Accord EX. Key Fob works trunk but not doors


Programming
When
Key added or replaced. System malfunction.
How
Obtain all keys. A maximum of 3 keys can be programmed. Close all doors and boot/tailgate. Switch ignition ON. Repeat procedure below 3 times: Within 4 seconds: Press key lock or unlock button. Within 4 seconds: Switch ignition OFF. Within 4 seconds: Switch ignition ON. Within 4 seconds: Press key lock or unlock button. System should now lock or unlock vehicle. Within 4 seconds: Press key lock or unlock button. Within 10 seconds: Press lock or unlock button of first key. System should now lock or unlock vehicle. Press lock or unlock button of second key. System should now lock or unlock vehicle. Press lock or unlock button of third key. System should now lock or unlock vehicle. Switch ignition OFF. Remove key. Check operation of all programmed keys.
NOTE: If less than 3 keys are to be programmed, remove ignition key after programming last key.

Jan 25, 2010 | 2004 Honda Accord

1 Answer

2004 ford focos st170 drivers door central locking


First thing first-change battery in fob-most jewelers can do this as well as dealers-takes more power to unlock than lock

Sep 24, 2009 | 2004 Ford Focus

1 Answer

My renault laguna 1999 rt remote key fob wont work?


IF YOU TYPE 1999 RENAULT LAGUNA REPROGRAMME KEY INTO A GOOGLE SEARCH, YOU WILL BE ABLE TO PRINTOFF INSTRUCTIONS TO REPROGRAMME THE KEY TO THE KEY READER.THE IGNITION NEEDS TO BE OFF TO DO THIS

Jul 09, 2009 | 2004 Renault 181

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...