Question about 1998 GMC Jimmy

1 Answer

Several time to start but it won't

First it start off tring to start it at least 2 to 3 tries. Then as the days go by it went to 6 to 7 tries. Now it will not start at all. But let me say when it starts it will run great. Turn it off for 4 to 5 hour then the same thing happen again everyday until it stop turning over. I can hear the fuel pump. But it still won't turn over.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 14,036 Answers

REPLACE FUEL FILTER .IT COULD BE PARTIALLY CLOGGED.ALSO REPLACE AIR FILTER.

Posted on Jul 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Won t start


run the fault codes and look for faulty cam/ crank position sensor as this is indicated by the backfire/hard start and lower idle RPM. Check that battery terminals are clean and tight..

Sep 22, 2013 | Pontiac Montana Cars & Trucks

1 Answer

Won start


Well it could be several different things. The security system, the neutral safety switch, the starter, a bad connection, and so on.

May 28, 2013 | 2000 Lincoln LS

1 Answer

I jumped car off it crunk on its own fora day,then batt went dead again,this time it won't jump off. It wants to crank but won't turn over.


not sure what you said but.
seems the battery is discharging,? 12.6v is fully charged,
own a voltmeter?
try a good loaned battery , does it start the car,?
i think you meant?
i can jumper cable start my car at any time. (off another running car)
but after running my car, the battery discharges and it will not crank at all. right?
this means ,the charging system on your car is bad.
if the starter cranks great, then the engine is flooded or is in great need of a tune up (sparkplugs etc)
if flooded try the super secret in the op guide, crank with throttle wide open , this magic trick cuts all fuel injection allowing the flooding
to purge away, and eventual starting.
my guess 2 is the car wont start, so you crank the battery flat
you jumper start it and it runs. (luck)
then day 2, same deal cranks ok but wont start.. ever tune up the engine?

Feb 08, 2013 | 2007 Suzuki Forenza Sedan

1 Answer

1992 Dodge Dakota won't start


when you turn the car over can you hear the fuel pump whineing?

Jan 25, 2013 | Dodge Dakota Cars & Trucks

1 Answer

Car was rinning perfect. One day it would not start. there was nothing, no clicking ,bell and guages were working. Jump start was nothing. Installed a new battery there was nothing. Went bact back 2 hours...


It sounds like you have an issue with your PassLock security system. I had the same with my 2002 Impala. Key turns OK, but won't start, won't crank. Wait 20-30 minutes, and car starts normally. There is usually a clue from the Battery and Security lights.
The problem starting to happen once a month, and eventually 1-2 times a week.
There are several write-ups on this problem for several GM cars for 2000-2006(?). Search this website, and search the web.
The official solution is to replace the ignition switch. The best solution is to bypass the Pass Lock system. I went ahead and did a full bypass, which involves cutting wires and adding resistors to the ignition circuit. I have not had a problem since.

Aug 19, 2011 | 2004 Chevrolet Impala

1 Answer

Wife has 2006 Buick Rainier went to start and it wouldn't crank she noticed the instrument cluster wasn't working and at that time she noticed the check engine light was on. After tring to start several...


THESE ARE POSSIBLE CAUSES TO YOUR PROBLEM. CLASS 2 CIRCUIT IS OPEN SHORTED TO GROUND OR TO B+. THE PCM IGNITION POWER CIRCUITS HAS A HIGH RESISTANCE CONDITION. THE PCM MAIN GROUND CIRCUITS HAS A HIGH RESISTANCE CONDITION. THE SDM MODULE COULD BE SHORTED PULLING THE VOLTAGE LOW. THIS MORE LIKELY DEALERSHIP FIX.

Feb 07, 2011 | 2006 Buick Rainier

1 Answer

3 days ago, i went to work no problem,had to move it after 6-7 hrs of time, would not turn on 2 try's, started like normal on 3rd. 2 days ago i drove it locally a couple of times, no problems. today...


I ran into the problem and it was corrosion on the battery terminals. on the inside against the battery. also check the the terminals for good connection.
Stay warm

Dec 26, 2010 | GMC Sierra 1500 Cars & Trucks

Not finding what you are looking for?
1998 GMC Jimmy Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...