Question about 2003 Chevrolet Venture Passanger

1 Answer

My left wiper blade go past the edge of the windshield, 2003 chevy venture

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 65 Answers

On the wiper harm ...should be a little cap remove-it ,make shure the rignt wiper is at good spot,unscrew the left wiper arm (not shure that its a screw ,could also be a clip under the arm )how ever ,once it is out ,put -it rignt back at is rignt spot...if it is still wrong ...could be the shaft that is worn or someone could ave replaced the harm inside the hood for a wrong one

Posted on Jul 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wipers don't touch windshield


The wiper arm springs are weak,just grab a used set of arms as most ventures wipe great.People who stick their wipers straight up,usually when freezing rain is coming ,ruin their wiper arm springs and have less wiping pressure too, so have to replace their arms at some point. PEOPLE STOP LEAVING YOUR ARMS IN THE UP IN THE AIR,OFF THE GLASS POSITION.

Mar 10, 2017 | 2001 Chevrolet Venture

1 Answer

How do I change wiper blades 2001 Chevy blazer


Open the cap at the end of the windshield wiper arm at the cowl of the Blazer. This will reveal the bolt that secures the wiper arm to the wiper linkage.
Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as you will reuse it later.
Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4pQJ39h
  • 3 Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

  • Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4pJlPaV
  • 2 Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as you will reuse it later.
  • 3 Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

  • Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4p1UYyB

  • 2 Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as you will reuse it later.
  • 3 Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

  • Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4p1UYyB

    Jan 15, 2011 | 2001 Chevrolet Blazer

    1 Answer

    Need to change windshield wiper blade on 1999 chevy venture


    In my experance if you buy the blades from you'r local,Auto Zone/Checker/etc. someone will walk out out to you'r car with you and "pop" them on, If you ask for help!

    Dec 22, 2010 | 1999 Chevrolet Venture

    1 Answer

    We're replacing the motor, gear box and plates to


    The wiper linkage and blades should be in the neutral position, or where they would normally lie when in the "off" position. Hope this helps. Remember to disconnect the battery while replacing electrical components.

    May 12, 2010 | 1999 Chevrolet Venture

    2 Answers

    I an '03 Chevy Venture van whose windshield wipers won't go down.


    Your windshield arm is in need of repositioning. Take off the cap on the windshield arm and loosen the nut under the cap. Reposition the arm so that it faces 180 degrees flat to the passenger side of the car. Tighten the nut. This should solve the problem you've described.

    Apr 11, 2010 | 2003 Chevrolet Venture Passanger

    1 Answer

    1997 Chevy Venture wipers


    Does the wiper arms "park" properly when you turn them off or are they different from left to right? In other words, is one sitting higher than the other?
    One other thing, I have had a few come in to the shop where the wiper arm was loose where it attached to the spindle. You can check those with a 13mm wrench or socket and make sure they are tight too.

    Sep 02, 2009 | 1997 Chevrolet Venture

    1 Answer

    Wipers hit one another


    Check the retainer nuts on the wiper arms. One might be loose. 

    Feb 15, 2009 | 2003 Chevrolet Venture Passanger

    1 Answer

    1999 Chevy Venture, Windshield wipers stop in upright position


    You will need to replace the wiper transmission.This is a common problem.

    Jan 24, 2009 | 1999 Chevrolet Venture

    1 Answer

    Chevy Venture 2003 needs new wiper blades


    Yes if they are for the front Window that is the correct size. 24" for both sides

    Dec 22, 2008 | 2003 Chevrolet Venture Passanger

    Not finding what you are looking for?
    2003 Chevrolet Venture Passanger Logo

    271 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    75117 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7772 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...