Question about Cars & Trucks

1 Answer

How do I polish corian?

Older corian countertop has surface imperfections.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 8,204 Answers

Clean. Apply some of the Corian cleaner to the cloth rags and clean off all the dust, dirt, and grime that was created from the sanding. First clean off everything with the cleaner and then rinse the rag and wipe down the countertops again. Polish.

Polishing Corian (Tips.Net) - Cleaning Tips

Posted on Dec 19, 2016


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Took the finish off a 9x12 area of my countertop. It is dull rough feeling. How to I restore that portion of the countertop? Thank you.

if it is a formica or other type of top finish then I suspect that you have damaged the plastic surface of the counter top
I would seek the advice of a shop that makes and supplies counter tops but I suspect that you will need a new top

Jul 04, 2015 | Cars & Trucks

1 Answer

Shock mount problem?

Hi there, does it do it on a good road? If not then I wouldn't get too concerned, it is a front wheel drive I presume and any front wheel drive car will follow any imperfections in the road and track the road imperfection, is it like the steering has a mind of its own and wants to follow the road surface, if so then this is normal, if not please take it to your mechanical shop and have them look at it

Feb 14, 2014 | Toyota Corolla Cars & Trucks

1 Answer

Suspension noise rear

Rear sway bar bushings

Jun 06, 2012 | 2004 Lincoln LS

1 Answer

Ok, i have a monte carlo 3.4. it over heats! ive changed the water pump and ive changed the thermostat. theres no water in the oil and it cools off frequently, but sometimes it just will not cool off and...

Hello! There is a GM Technical Service Bulletin # 00-06-02-001 Date: January, 2000 which addresses this problem...The radiator filler neck has an imperfection in the sealing surface...It is NOT necessary to replace the radiator...Using a piece of 400 grit sandpaper backed with a block of wood; Polish the filler neck surface...Replace the radiator cap...Part # STANT Part # 10231...See picture below...Guru...Saailer


Sep 27, 2011 | 2000 Chevrolet Monte Carlo

1 Answer

Key wont turn form the on positon back to off to

Is this the original key for the truck? If not, an imperfect cut sometimes causes this problem. If it is the original key, inspect the key for burrs, and make sure it is not bent or warped--it must be flat when laid on its side. Hold the key right side up against a known flat surface--is the key straight or bowed? Brass is a soft metal that can be easily bent in either direction. Also, if the key/truck is older, say 10 yrs or more, the key may just simply be worn.
Since you've replaced the lock cylinder, lubrication and/or the lock is not at question. It's something to do with the key.

Feb 23, 2010 | GMC Sierra 1500 Cars & Trucks

2 Answers

Scratch on ultra bright aluminum wheel- I have removed some deep scratches on my wheels and sprayed clear coat on them but can't get the same brightness on the wheel as the original untouched areas..

The factory wheels have a clear anodized finish on them, unfortunately you will never get them to look perfect. Clear coat is a good idea to help protect the scratch from spreading.

Sep 13, 2009 | 2008 GMC Acadia

1 Answer

Oil filter leaking

when you remove the filter, make sure an old rubber gasket isn't stuck on the mating surface, then check the mating surface where the oil filter goes for any imperfections or burrs in the metal that would cause a small gap in the seal when the filter is on.

Jul 01, 2009 | 2000 Chevrolet Cavalier

1 Answer


sanding really dont matter .. I usually sand only one direction and watch what your doing to the surface of the clear coat .. you can actually watch the orange peel disappear..use a damp rag once in a while to wipe the area your sanding so you can see your surface to make sure your getting it perfect .. this is the way to get a super job. if you use a rag to wipe the surface this also helps you see if your getting enough off or not .. use 2000 grit when doing this it makes it easier to buff off when your all done.. then go to your polishing compound not rubbing compound . hope this helps and good luck .. I love clear coating its really nice if you take your time sanding it and getting the surface perfect and with no imperfections... holler if you need more.. Jerry

May 10, 2009 | 2002 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

77947 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14405 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides