Question about Pontiac Cars & Trucks
The transmission is sealed (no dipstick/fill tube). If fluid id needed you need to put the vehicle on a lift and access the fill plug from under the vehicle. The trans temperature must be monitored (by use of a special scanner) before filling or overfilling will damage the transmission resulting in early failure.
Posted on Dec 19, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
on some of the newer cars they dont have dipsticks they have a plug near the pan that you have to pull on the trans to check the fluid level and to fill it there is a cap hidden on top of the trans by all the stuff you have to try to bend a funnel around to get in it. dont you love the engineers
Posted on Nov 19, 2008
You can add transmission fluid to you transmission through the transmission fluid dipstick tube. Take your time and use the right size funnel, check and dubble check to make sure you don not over fill. Over filling the transmission is just as bad as not haveing enough fluid too.
Good luck and hope this helps
Posted on Apr 19, 2009
there is no dipstick. the fluid must be checked from under the vehicle. fluid must be at 209* f.
or trans will be overfilled. there is a plug on the right end of the trans( 7/16" )& must be removed with engine running, if at proper temp & fluid comes out then trans is full.
Posted on Jul 07, 2009
I am not sure which engine you have on your 202 Grand Prix, but if you have the most common 3800 V6 this is where it should be. Look at the back of the engine compartment just to the left of the plastic master cylinder resevoir.
Here is a picture you can look at...
I hope I was able to assist you!
Posted on Jul 25, 2009
Hello! To check the fluid level, the first thing you want to do is get the fluid to operating temperature, by driving it for a bit and letting it shift through all gears. Once you've done that you need to make sure you park the car on a very level surface. Remove the front passenger wheel and the splash guard. From there reference the picture below to give you an idea where the fluid check plug is located - there is no dipstick on this transmission (4T45e). You will also see the fill plug location.
If you do a pan drop and filter replacement only, the fill capacity is 6.9 quarts. You will want to use Dexron III type transmission fluid.
FYI - here are the torque specs for the pan bolts is 106 in/lbs and the check/fill plugs are both 124 in/lbs.
Hope this helps and good luck!
Posted on Sep 25, 2009
Testimonial: "i already found the info, but the answer is 100% cinsistant with the info i researched. thank you!!!! "
Tips for a great answer:
Mar 15, 2017 | Pontiac Cars & Trucks
Jul 31, 2016 | Pontiac Cars & Trucks
Jul 25, 2014 | 2008 Pontiac Torrent
Apr 12, 2014 | 2006 Pontiac Torrent
May 17, 2010 | 2006 Pontiac Torrent
Oct 22, 2009 | 2006 Pontiac Torrent
Sep 06, 2009 | 2006 Pontiac Torrent
Jul 22, 2009 | 2009 Pontiac Torrent
Jul 07, 2009 | 2006 Pontiac Torrent
51 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: