Question about 2011 Infiniti QX56

Open Question

Where is the fuse for 2011 QX56 power liftgate?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Liftgate equinox 2011 will not open . Replaced outside switch with new design. old one got pushed inside and was damaged. Checked the fuses #23 , 32 and 49 . All good .


The only thing I can say first is have you got power still going to the switch , just in case you might have a broken wire you can't see so use a multimetre or get a auto electrician to do it for you colin e

Apr 21, 2017 | 2011 Chevrolet Equinox

1 Answer

How do i replace the park assist module in a 2011 chevy traverse???/


Have you checked the fuse? If so, the module is located behind the left rear trim panel. Remove the panel to access. Below is a diagram of the trim panel and location of the module in BLUE>
Preliminary Procedures
  1. Move the rear seat to the full forward position.
  2. Remove the rear number?2 seat . Refer to 3rd Row Seat Removal and Installation.
  3. Remove the rear quarter upper trim panel. Refer to Quarter Upper Trim Panel Replacement.
  4. Disconnect the liftgate actuator rod from the liftgate. Refer to Liftgate Actuator Rod Replacement.
  5. Disconnect the rear seat number 2 shoulder belt anchor bolt. Refer to Rear Seat Number 2 Retractor Side Belt Replacement.
  6. Remove the liftgate door sill plate. Refer to Liftgate Door Sill Plate Replacement.



woauitf41mzpgaaaabjru5erkjggg==

Nov 16, 2014 | 2011 Chevrolet Traverse

1 Answer

QX56 2007. Liftgate intermittently goes up by itself. Short? Switch? What is it?


it is either not latched properly or the switch is shorting out allowing the lock to be energised . It may be the opening switch that is faulty or needs adjustment.

May 21, 2014 | Cars & Trucks

1 Answer

Door panel


I HAVE A 2005 INFINITI QX56 and my cruise stopped working. Does anyone know where the cruise box is located and what it looks like. Someone please respond.

Oct 19, 2013 | 2011 Infiniti QX56

1 Answer

Qx56 Fuse box diagram


I HAVE A 2005 INFINITI QX56, my cruise has stopped working, does anyone know what the cruise box looks like and where its located? I cant get any dealership to tell me or show me. Thanks

Dec 27, 2012 | 2011 Infiniti QX56

1 Answer

2004 lincoln navigator ,doors will not open rear hatch will not unlock


The door locks are controlled by the vehicle security module (VSM). It gets power from fuses 30, 5, 6, and 40 in the central junction box (CJB). You say you checked these and all are OK. Therefore the problem must be in the door lock actuators, the door lock relays, or the door lock switches. I doubt that all of these are defective, so the VSM may be defective.

The liftgate is controlled by the power liftgate module (PLM), althogh the motor in the liftgate glass actuator is controlled by the VSM. The PLM gets power from fuses 105 and 5 in the CJB. If the PLM is assumed to be OK, the source of the problem could be the liftgate unlatch motor, the liftgate cinching motor, the L/R liftgate obstacle detection strips, the liftgate home position switch, the liftgate fork bolt/detent switch. or the power liftgate open/close switch

Sep 28, 2012 | 2004 Lincoln Navigator 4x4

1 Answer

How do you remove the roof rack from a 2011 QX56


remove the interior headliner an unbolt it...but u will have holes in the room if u do

Jul 12, 2011 | 2011 Infiniti QX56

3 Answers

The rear lift gate on my 2006 Lincoln Navigator will not open automatically or manually and there appears to be no way to access anything inside the door from inside or out.


POWER LIFT-GATE OPERATION - To open the optional power liftgate, push the button on the instrument panel , press on your five-button key fob (if equipped), or press and release the control located in the left rear quarter panel (Figure B). To unlatch the liftgate glass, push the button ) under the center of the license plate lamp shield, or press on your five-button key fob. Do not open the liftgate or the liftgate glass in a garage or other enclosed area with a low ceiling. Keep clear of the liftgate when operating the rear switch. To open the liftgate manually, pull the handle located on the liftgate to release the liftgate from the vehicle. The power system will take over when you release the handle. To close, make certain the rear window is closed, and then pull down the liftgate a few inches to activate power closing. Closing the gate rapidly or more than a few inches may activate the obstacle detection feature and stop the power system.------------ Also click this link for more help:--- http://technoanswers.blogspot.com/2011/05/power-liftgate-on-will-not-open-on.html ------------ This should help.Keep updated.Thanks.Helpmech.

May 19, 2011 | Lincoln Navigator Cars & Trucks

3 Answers

Rear backup camera


the camera is at the liftgate

Jan 23, 2009 | 2004 Infiniti QX56

Not finding what you are looking for?
2011 Infiniti QX56 Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14362 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...