Question about Cars & Trucks

Open Question

I have been trying to play for a couple of days it locks up to the Santa sleigh and wont let me play I have tried to do what you have said on Santa stuck it still wont let me

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why wont it start


you have to charge your battery user tried to start it too many times for the batteries week and you only get a couple chances so charge it up and dry clean the connections also clean your connections while you are there

Jul 07, 2014 | 2003 Hyundai Santa Fe

1 Answer

Santa fe 2007 wont start makes a single click noise


May be ab bad starter solenoid, or corroded/loose connection at starter, or (ground). Could also be a bad ignition switch. Start from the load; the starter. Test for 12V at starter, OK. Connect short wire from starter and touch sylenoid connection..

Nov 09, 2013 | 2003 Hyundai Santa Fe

1 Answer

The key wont turn in the ignition of my hyundai santa fe, its a 2005. The steering wheel lock is on and the wheels are straight, the key does not turn at all.


hi from uk please try this ? with key removed try gently turning steerwheel to the right if you feel a slight spring in steering ? hold on the spring and insert key it should work and release lockand turn ign on ? if steering is springing on left ? try as above the same method not unusual for steer lock to prevent turning key as the steering even in straight position ? the necessity to gently release load on lock is req'd to allow key to turn/unlock the steering lock from the steering column practice doing the above each time you fit key to unlock steering and tuning ign on to start hope this helps

Oct 16, 2009 | 2003 Hyundai Santa Fe

2 Answers

2004 Santa Fe Ignition switch locked


I just had this happen to me yesterday with my 2002 Santa Fe. After trying everything (jiggling steeling wheel, shaking the car, you name it we tried it). We got a chain and pulled the car ahead about 2 feet. That didn't seem to do anything but we then pulled up the emergency brake into the lock position and tried to start the car (with the ER brake on) and it worked!!! The steering wheel came unlocked and the car started up. Don't know if it was the pulling of the car that broke something free or if it was the ER brake, but that was what worked for me.

Jan 11, 2009 | 2004 Hyundai Santa Fe

1 Answer

2004 huyandi santa fe


have you had fuel pump checked?

Dec 30, 2008 | 2004 Hyundai Santa Fe

1 Answer

1993 toyota camry ignition wont turn


the steering wheel SHOULD be locked if the key is not in the ignition and turned to the 1st position.  If you can turn the steering wheel more than an inch or so without the key n the first position,  the ignition switch (read: thingy you put the key in) is bad.   
Sometimes you may have to move the steering wheel slightly to one side or the other to get the key to turn,  this in itself is not a cause for alarm. Try it and let us know.  If this doesn't work, you are probably looking at a couple hundred dollars parts and labor to get the switch/steering wheel lock mechanism fixed.
Please rate all solutions.

Nov 06, 2008 | 1993 Toyota Camry V6

1 Answer

SHIFTRONIC


Try pressing your brake pedal harder or pump the peadal couple of times energically then try to move the gear lever.

Oct 26, 2008 | 2003 Hyundai Santa Fe

1 Answer

My hyundai santa fe


Hi! i think you must describe more problem symptoms;
DESCRIPTION The starting system includes the battery, starter motor, solenoid switch, ignition switch, inhibitor switch(A/T), ignition lock switch, connection wires and the battery cable. When the ignition key is turned to the start position, current flows and energizes the starter motor's solenoid coil. The solenoid plunger and clutch shift lever are activated, and the clutch pinion engages the ring gear. The contacts close and the starter motor cranks. In order to prevent damage caused by excessive rotation of the starter armature when the engine starts, the clutch pinion gear overruns. http://hmaservice.com/viewer/dispimg.asp?path=/data/Passenger/HY/HMA/ENG/SHOP-images/HY-SM13-IMAGES-ENG/ebkd010a.gif INSPECT SPARK TEST 1. Remove the spark plug cable. 2. Using a spark plug socket, remove the spark plug. 3. Remove the ignition coil. 4. Install the spark plugs to each spark plug cable. 5. Ground the spark plugs. 6. Check is spark occurs while engine is being cranked. 7. Using a spark plug socket, install the spark plugs. 8. Install the spark plug cable and ignition coil.

May 24, 2008 | 2002 Hyundai Santa Fe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...