My 2005 ford escape v6 is only firing on cylinder 1 and 6
Your an 2005 Ford Escape 3.0L, you don`t have a distributor. Each cylinder has it`s own coil and is controlled by the PCM. You need to scan the PCM to determine which cylinder is loosing power ( misfire). P0301 cylinder #1, P0302 Cylinder #2 and so on. The coils are common problems with this vehicle, but pay close attention that the drivers in the PCM are not at fault. #1 cylinder is on passenger side near the firewall passenger compartment. firing order as follows, Bank #1 1-2-3 front of engine to rear. nearest the passenger compartment. I`m an ASE Master with 30 years experience. Be careful, don`t waste money on unneeded parts! I own my own company. 805-369-4589 Jerry Bryant. Advise is free, but like reading a diagnostic manual does not mean the problem is solved. Correct diagnoses and system inspection and testing is what needs to be done so you don`t waste money!
May 11, 2012 |
2005 Ford Escape XLT