Question about Tata Cars & Trucks

Open Question

How to soft Tata vista qua(rajet engine sousand

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How can I reset the timing on a Tata Vista 1.4i 16 v. The camshaft and crankshaft have no markings . Further more the camshaft pulley is a vvt gear. Can you assist please

The timing marks are on the gears, and the gears will only go on in one position. Set them where the need to be when you put the gears on.

Nov 28, 2017 | Tata Cars & Trucks

2 Answers

Please tell me the engine specification of Tata Nexon. Does it is coming in the automatic as well as CNG version in India?

Tata Nexon is the subcompact 4-metre SUV from the Tata Motors, which has created a lot of buzz even before its launch. I don't expect the Tata Nexon gets a CNG kit and it only offered 6-speed manual transmission. Here I specify some of the Tata Nexon specifications, have a look

=> It is available in both the engine. The petrol variants carry 1.2-litre Revotron which produces 110 bhp of power & 15-17kmpl of mileage while diesel have 4-cylinder 1.5-litre Revotorq engine which makes 110 bhp of power & 21-23kmpl mileage.

=> 6.5-inch touchscreen infotainment system, automatic climate control, dual front airbags & reverse parking sensors

=> Three drive modes Eco, City and Sport


Sep 12, 2017 | Tata Cars & Trucks

1 Answer

2005 Tata Indica, Reverse gear Grinding, all other gears are soft, what is the problem? How can I resolve it? Where is the clutch adjustment?

if first gear is easy to engage ( no noise , then the problem is in the reverse gear selection not a clutch adjustment problem

reverse in a non synchro gear so any vehicle movement while selecting it will cause it to grate
other than that it is a problem in the transmission

Dec 01, 2016 | Tata Cars & Trucks

1 Answer

What must a Tata Telcoline head be Torqued.

When doing major engine work a shop manual is essential, as it is not just the torque value, but sequence that is important. Further, many newer engines use head bolts that must be replaced, and torque values now may include degree angles for final tightening.

Jun 13, 2016 | Tata Cars & Trucks

1 Answer

I have Tata Vista Safire with starting problem someone says replace ecu and immobilizer then what procedure did I follow to replace both

I think 'someone' needs taking out back and needs a good talking to.

There are many more simple things to check before swapping out the ECU and Immobiliser!

Do you have a spark at the spark plugs. Get your friend 'Someone' to hold the plug lead while you turn the engine over. If he jumps, you have a spark. Alternatively, remove the plug, put the cap back on it and hold it against the engine block. you should have a big fat blue spark.

After cranking, are the plugs wet with fuel? If they are you have petrol going to the engine.

Do you have enough fuel pressure?

Only after these checks would you look for the more complicated problems, and really the best idea is to go to a Tata dealer who will have all the diagnostic tools and actually save you money in the long run,

Jan 08, 2016 | Cars & Trucks

1 Answer

What is the pairing procedure of ecu with immobilizer of Indica vista

TATA Indica Vista ECM / ECU - YouTube

? 2:26
Mar 8, 2014 - Uploaded by Flip Keys
This video shows how to open TATA Indica Vista and ManzaECM / ECU for repair purpose.

How to extract Immobiliser Chip from Indica Vista key ...

? 0:52
Nov 8, 2012 - Uploaded by Flip Keys
If your original Indica Vista key breaks, wears-out or gets damaged then you can re-use its immobilizer chip ...

Maruti Suzuki SX4 ECM / ECU - YouTube

? 2:37
Jan 12, 2014 - Uploaded by Flip Keys
If you are repairing Maruti Suzuki SX4 ECM / ECU or coding a new immobilizer key then you can open the ...

TATA Motors INDICA VISTA Owner's Manual - ManualsLib

Jan 08, 2016 | Cars & Trucks

1 Answer

Show me where does the cam sensor fit on a tata 2005 1.4

No picture ..

But, the camshaft sensor would usually fit on the rear of the engine/camshaft.

Look for any unit that has a couple of wires. The camshaft sensor maybe in a small metal housing bolted onto the rear of the engine, in the camshaft area. It isn't difficult to find it

Oct 26, 2015 | Tata Cars & Trucks

1 Answer

Safe Mode stays on

Lets get things straight first, When you safe mode do you mean it's in Limp home mode? When you say the light stays on and does not flicker are you referring to the engine ECU light.If the ECU light is on then there must be a fault code in the systems 100% has to be. Please be more specific.

Jan 07, 2014 | Tata Aria Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tata Experts


Level 3 Expert

77932 Answers


Level 1 Expert

31 Answers


Level 3 Expert

2992 Answers

Are you a Tata Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides