Question about Cars & Trucks

Open Question

How do I get a used transmission to go? Or how do I get the pcm to read the used one

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 chevy malibu damage Light front end damcodend error codes P0401 P0605 P0842 P0642 The 0401 code is being thrown twice and I belive it is the egr wich is common on these cars from what my buddy tells...


DTC P0401 Exhaust Gas Recirculation (EGR) Flow Insufficient
Probably plugged passage's , not the EGR valve .
What type code reader are you using to read these codes ? I have factory service info. Doesn't show P0842 or P0642 , no such codes . You don't show what engine yours has , I'am assuming you have 3.5 L !
P0604
Control Module Random Access Memory (RAM)
PCM
DTC P0601, P0602, P0603, P0604, P0605, P0606, P0607, P1600, P1621, P1627, P1680, P1681, P1683, or P2610 in Engine Controls - 2.2L (L61)
or
DTC P0601, P0602, P0603, P0604, P0605, P0606, P0607, P1600, P1621, P1627, P1680, P1681, P1683, or P2610 in Engine Controls - 3.5L (LX9)

P0717
Input Speed Sensor Circuit Low Voltage
PCM
DTC P0717 in Automatic Transaxle - 4T40-E/4T45-E
P0741
Torque Converter Clutch (TCC) System - Stuck Off
PCM
DTC P0741 in Automatic Transaxle - 4T40-E/4T45-E
P0742
Torque Converter Clutch (TCC) System - Stuck On
PCM
DTC P0742 in Automatic Transmission - 4T40-E/4T45-E
P0748
Pressure Control (PC) Solenoid Control Circuit
PCM
DTC P0748 in Automatic Transmission - 4T40-E/4T45-E
P0751
1-2 Shift Solenoid (SS) Valve Performance - No First or Fourth Gear
PCM
DTC P0751 in Automatic Transmission - 4T40-E/4T45-E
P0752
1-2 Shift Solenoid (SS) Valve Performance - No Second or Third Gear
PCM
DTC P0752 in Automatic Transmission - 4T40-E/4T45-E
P0753
1-2 Shift Solenoid (SS) Control Circuit
PCM
DTC P0753 in Automatic Transmission - 4T40-E/4T45-E
P0756
2-3 Shift Solenoid (SS) Valve Performance - No First or Second Gear
PCM
DTC P0756 in Automatic Transmission - 4T40-E/4T45-E
P0757
2-3 Shift Solenoid (SS) Valve Performance - No Third or Fourth Gear
PCM
DTC P0757 in Automatic Transmission - 4T40-E/4T45-E
P0758
2-3 Shift Solenoid (SS) Control Circuit
PCM
DTC P0758 in Automatic Transmission - 4T40-E/4T45-E
P0815
Upshift Switch Circuit
PCM
DTC P0815 in Automatic Transmission - 4T40-E/4T45-E
P0816
Downshift Switch Circuit
PCM
DTC P0816 in Automatic Transmission - 4T40-E/4T45-E
P0826
Up and Down Shift Switch Circuit
PCM
DTC P0826 in Automatic Transmission - 4T40-E/4T45-E
P0973
1-2 Shift Solenoid (SS) Control Circuit Low Voltage
PCM
DTC P0973 in Automatic Transmission - 4T40-E/4T45-E
P0974
1-2 Shift Solenoid (SS) Control Circuit High Voltage
PCM
DTC P0974 in Automatic Transmission - 4T40-E/4T45-E
P0976
2-3 Shift Solenoid (SS) Control Circuit Low Voltage
PCM
DTC P0976 in Automatic Transmission - 4T40-E/4T45-E
P0977
2-3 Shift Solenoid (SS) Control Circuit High Voltage
PCM
DTC P0977 in Automatic Transmission - 4T40-E/4T45-E

Sometimes with code readers they get confused an just throw any old codes . Have it checked by someone with GM Tech 2 scan tool .

Aug 03, 2017 | Chevrolet Malibu Cars & Trucks

1 Answer

Shift light flashing changed transmission \coil ecm\pcm transmission module diagnostics cyl missfire invalid data u0401


First is year make and model. A U code is data communication codes. Sorry to say, you could have done all this and it could have just been a bad wire.

Mar 19, 2016 | Cars & Trucks

1 Answer

P07000 code


P0700-TRANSMISSION CONTROL SYSTEM (MIL REQUESTWHEN MONITORED Ignition on and battery voltage greater than 10 volts.SET CONDITION An active DTC is stored in the TCM. One Trip Fault. Three good trips to turn off the MIL.POSSIBLE CAUSES - DTC Present in the transmission control moduleAlways perform the Pre-Diagnostic Troubleshooting procedure before proceeding.DIAGNOSTIC TEST 1. DTC PRESENT IN EATX CONTROLLER This is an informational DTC letting you know that a DTC(s) is stored in the Transmission Control Module. Erase this DTC from the PCM after all Transmission DTC(s) have been repaired. Using a scan tool, read the Transmission Controller DTC and refer to the Transmission Category and perform the appropriate symptom. PCM Diagnostic Information complete. Continue Test Complete.
That a dodge code

Apr 09, 2015 | Cars & Trucks

1 Answer

Where is the transmission controler on a 2001 jeep


2001 Grand.
is car in the USA,? they make these in europe too.
with diesels there, all different.
but my guess , no engine stated, and the trans matches those.
the TCM in most cars was moved to the insides of the ECU
then renamed it to PCM, see?>
why not just read the FSM.
posted here over 300 times, this link, RTM read the manaul
then ask"?
the car is WJ
chapter 8w covers wiring.
as does trans, cover the 3 trans used here, all different.


why not just post symptoms and avoid easter egg hunts to nowwhere.
did you scan the PCM first? that be first.
after 1:
1: check levels on the box.
2: check fuses.
3: Scan the PCM for tranny errors.


301x and counting
http://www.morris4x4center.com/knowledge-base/index.htm?utm_source=cj#service

Jun 18, 2014 | 2001 Jeep Grand Cherokee

2 Answers

How to reprogram PCM for chrysler 2012 C300


why?
first tell what you are doing.
replacing a bad PCM
hacking it?
what?
the PCM can only be programmed at the dealer or independents set up to do so (licensed)

The FSM is clear on that, read it.
same at alldata.com

Jun 05, 2014 | 2008 Chrysler 300C 2.7

1 Answer

Transmission gets hot and temp gage works backworks


with a scan tool read data of transmission look for trans,temp.
if it said the same thing as the temp gauge in cluster
temp sensor inside transmission send info to PCM then pcm send message to cluster

Oct 15, 2013 | 1993 GMC Sierra K1500

1 Answer

P0888 code after i changed pcm why


Here is the definition for the code. The problem could be the relay or the harness.

P0888 CHRYSLER Description The Transmission Control Module (TCM) has detected less than 3 volts at the Transmission Control Relay output circuit
Read more: http://engine-codes.com/p0888_chrysler.html#ixzz2982gmkin

Oct 11, 2012 | 2003 Chrysler Town & Country

1 Answer

I have a 2001 pontiac sunfire the check engine light is on. when someone tried to reset it this code came up P1621 what does that mean?


A vehicle control module (VCM) or powertrain control modules' (PCM) electronically erasable programmable read only memory (EEPROM) contains data essential to running the engine and transmission. The VCM/PCM stores critical preprogrammed data within the EEPROM, this data remains even if the vehicles' battery is disconnected. At power up the VCM/PCM checks the integrity of this data. If the checksum of the EEPROM does not match a predetermined value, DTC P1621 will set. The DTC will also set if the VCM/PCM is unable to correctly read or finds corrupt data from the EEPROM. GM recommends testing/replacement of the VCM/PCM using required equipment by a qualified technician for this type of VCM/PCM memory performance fault condition.

Jun 05, 2010 | 2001 Pontiac Sunfire

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...