Question about Cars & Trucks

Open Question

Eiger 400 will only start while holding brake handle

Neutral lite does not come on

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Truck wont start.checked eng lite on.code #po720 says it is a output speed sensor


Neutral safety switch maybe. Make sure the gear selector is in park. Brake pedal engaged.

Jul 02, 2015 | GMC Sierra 1500 Cars & Trucks

1 Answer

Is this a neutral safety switch problem?


A bad neutral safety switch would not allow you to start the car at all. This sounds like a shift linkage problem . good luck

May 22, 2014 | 2003 Suzuki Grand Vitara

1 Answer

2001 dodge neon leaking water from water pump i was driving n it felt like my car went into neutral n engine lite came on n it died it will turn over but won't start what do i check


well to me it seems like you have either a intake manifold leaking or head gasket leaking also which is causing coolant to go into motor.check the oil and see if it looks milky or overfull.

Dec 10, 2012 | 2001 Dodge Neon

1 Answer

My 2002 f150 will only start in neutral what's the problem


Check fuses and tail lights see if all working. The truck will not start if brack lite are not working

Jul 04, 2012 | 2002 Ford F150 Regular Cab

2 Answers

Ignition key won't turn to on position, steering wheel does not appear to be locked


if you have a standard, put it in neutral. if automatic, park or neutral.

Nov 25, 2009 | 2004 Volvo XC70

1 Answer

Back up lights won't turn on when in reverse


Possibly you have a bad neutral safety switch, or the reverse lite switch @ the trans. Get a test lite @ a parts store. Check all the fuses, then turn on the key to the run position (don't start the engine), set the parking brake! Put the car in reverse and check for power @ the lite socket. If you have power, change the bulbs. You'll have to get deeper into the elec. system if there's no power. Good luck.

May 27, 2009 | 1998 Toyota Camry

1 Answer

1991 honda accord auto with 66000 miles


I had a similar problem mine would not shift correctly and the light stayed all the time. I replaced the TCM (transmission control module), its located under the passenger side floor board its not very hard to replace I believe its only four bolts holding it in place. Just pull back the carpet and its visible. But you have to know if its a japanese or an american built honda when you buy your new one.

Jan 12, 2009 | 1992 Honda Accord

2 Answers

Auto shift lever will not engage


I have repaired many such issues on ford trucks, the column will have to be taken apart and inspected, there will be broken parts

Sep 22, 2008 | 1986 Ford F 250

2 Answers

How to remove a Neutral Safety Switch; Incl. backup lite sw.


pull the 2 screws out of the shifter cover and the switch is on you right

Aug 12, 2008 | Volvo 240 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...