I need the wiring diagram for an EnduroMax Vx7000i that has been chopped about

Did you buy it used ? Did it have police radios an such before ? an then taken out . Wiring behind the instrument panel chopped up ? etc... Do you know how to use wiring diagrams an a DMM - digital multi-meter to test electrical circuit's ? Free wiring diagrams here http://www.bbbind.com/free-tsb Enter vehicle info. year , make , model an engine . Under system click on lighting ,then under subsystem click on the thing's that aren't working etc.... Click the search button then the blue link. . Just for instance click on stop lamps . I see a lighing control module . Now click on the lighting control module , i see this module controls turn / hazard , interior lighting ,plus someother thing's . The module may have codes stored in memory . I would say your best bet mite be to take it to a qualified repair shop.

Easist way to solve that problem is ,go get enouther harness for it from a auto wrecker from the same kind of car, Then the wires will all match up, Just reconnect one buy one at a time,

Here is a link to the wiring diagrams for the car. http://bbbind.com/free_tsb.html

I have the diagrams, but how to get them to you is the problem... all GM "A" body cars will have the same diagram. Google pontiac tempest/gto orchev chevell etc. It is fairly straight forward. I am not sure what you need the diagram for, but one of the most common problems with lighting issues with the cars is in the ground. Make sure one you have a good ground and that the old connector that is used to attach the ground wire to the car is in very good condition. If for any reason you are not sure replace it. Year One, and many others sell a compleate front and rear harness for these cars from various manufactures. The harnesses them selves are not dificult to install and can end a lot of frustrations in chopped up or broken wiring that has accumulated over the years. Good luck and next time you are looking for something let the forum know what the problem is so someone can dial in to the exact answer. Could save you a lot of time and money.

You can get both wire harness diagrams from faxonautoliterature.com. These are Ford dealer manuals so should be correct. You can get them for $40 to $50 for the pair. I've used them before and had excellent service. Hope this helps.

hi

fan stil dont run because there is no power coming to the fan. this may be because
1.the wire comin to the fan may be chopped off.
2.the junction box/realy from where it is coming may be damaged so no outfut from it.
3.the fuse may be blown out so power going to the fan
4.the terminal in the fan to which the wires are connecting may be disconnected.
5.there is no power coming from the battery that the wire joing the battery and fan may be chopped off.

if my answer was useful please rate me.

Go to faxonautoliterature. They carry original factory service manuals and they list one for your car. It will have all the wiring diagrams in it. I have used them before and found their service to be excellent. Hope this helps.

NO, you will need to have Mr. Chop Shop fix it, or take it to a real mechanic and send him the bill.

why not buy the correct harness ends for it ----Jegs or Summit . coms
or download the diagram free still from autozone.com you may have to create a logon and password Vehicle specific and better than a haynes or chilton ---still easier to ask here first on problems though
why chop into your harness ---if you do check the auto parts store for cheap weather tight connectors

It might be beneficial to you to go to a scrapyard and take a look at one that hasn't been chopped up! You may even want to buy whatever has been removed while you are there!