Question about 2006 Nissan Altima

Open Question

2006 Altima 3.0 Is there a fuse for the key fob to work. Where is that fuse located.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Fobs are not working on my 2010 ford explorer changed batteries and still dont work. what fuse relates to the fobs


Did you try programming the key fob? Your owners manual has this info. I don't know if programming will help or not? Just a thought.
fleet.ford.com should have your owners manual, if you don't have one,you can read it for free.
Also try owner.ford.com
has owners manual you can look at for free.

Jan 29, 2018 | Ford Cars & Trucks

1 Answer

Why doesn't my 2013 Nissan Sentra recognize the FOB? Says FOB "not detected" when its in my hand. Is this a dead battery in the FOB? how do I get this fixed?


Does the key fob open the and close the door? If it does the battery is fine.

This seems to be a known problem. Move the fob closer to the Start Button.

http://www.nissanclub.com/forums/2013-nissan-altima-discussion-2-5-3-5/337333-intelligent-key-not-recognized.html

Instructions for reprogramming

http://www.nissanhelp.com/diy/common/nissan_reprogram_key_fob.php

http://www.carcomplaints.com/Nissan/Altima/2014/electrical/fob_not_recognized.shtml

Dec 02, 2015 | 2013 Nissan Sentra

1 Answer

2008 Altima with push button start. Why won't the fob unlock doors?


Insert key into and remove it from ignition more than six times in 10 seconds. When the hazards lights will flash twice insert key into ignition and turn to ACC position.
Then push any button on key fob once, the hazard lights will flash twice. Then open drivers door to END.
Should be all working again.

Jun 06, 2015 | 2008 Nissan Altima

1 Answer

On my 2006 Nissan Altima the Key fob stopped


Take the fob off the key ring and leave at home. Does it still do funky things? If not - it is the fob and first vote is to replace the battery inside - typically a lithium cell. Or the fob itself. If still acting up with the fob away, pull the fuse for the keyless entry, count to 30 and put back. Another less likely cause is the relay - under the hood - marked Keyless entry. If you need to replace the fob, there are instructions for Nissan on numerous sites including below, I have replaced a 2003 and reprogrammed the car to recognize. 2006 Nissan Altima Keyless Entry Remote Programming Instructions...

Feb 21, 2018 | Cars & Trucks

1 Answer

I changed my car battery, now my 2008 Nissan Altima key fob won't work


There is a special procedure involved in keying your fob to your car once the battery has been changed. You must lock and open the door with your key. Turn the ignition to "on"(not start) then push the fob's open and close button, then shut off ignition. This procedure is done everything the key battery is changed. Hope this can help you!
------------
Motorcycle Diagnostic Scanner

Oct 31, 2012 | Cars & Trucks

1 Answer

My key fob has quit working and it tells me no key fob detected. My car is a 2006 Caddie STS. Both fobs have stopped working.


Mine did the same thing. I put the fob into the reprogramming slot located in the center console and was able to get it started by leaving the in the slot. Hope it works for you.

Sep 11, 2011 | 2006 Cadillac STS

2 Answers

Both key fobs for honda pilot 2006 no longer works. Do I need new keys or is it something internal such as a fuse?


First thing, does the red light on the remote light up when you push any of the button
if no, then replace battery inside remote
if yes, then try repograming the remote to the car again.
-Have both remote ready. fob#1 and fob#2 (doesn't matter which one is #1 or #2)
-each step has to be done within 5 sec or it will not work, but don't do it super fast.
1.turn key just to the "on" position (not starting) and push "lock button " on fob#1 once and release
2.turn key off
3.turn key just to the "on" position (not starting)and push "lock button " on fob#1 once and release
4.turn key off
5.turn key just to the "on" position (not starting)and push "lock button " on fob#1 once and release
6turn key off
7.turn key just to the "on" position (not starting) and push "lock button " on fob#1 twice (if you only have one fob, then stop here and go to step 7)and push the "lock button" on fob#2 twice.
8.turn key off and remove key from ignition.
if you did it right, remotes should work again.
good luck

Dec 17, 2010 | Honda Pilot Cars & Trucks

1 Answer

Hi I want to program a new keyless fob. I have the original fob that works great.Do I need to do anything to the original key when I program the new fob? 2006 nissan altima


1. Close and lock all doors with the driver’s side power lock/unlock switch.

2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard
Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder
each time. If this procedure is performed too fast, system will not enter programming mode.

3. Insert key into the ignition cylinder and turn to the ACC position.

4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press
the button more than one time in the above step. If the button is pressed more than one time, the programming
procedure will not be successful.


5. If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side
power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should
flash. Repeat this step for each transmitter (including any existing transmitters).

6. Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door.

Nov 16, 2009 | 2006 Nissan Altima

2 Answers

But a used 2006 solara but key fob does not remotely open trunk. Any suggestions?


Yes, insure that you have power to the trunk lock inside trunk, If not could be lose/broken wire or shot fuse. I am sure the key fob does work for the doors? If not have key fob battery replaced. Also, a quick check on power to trunk lock, check to see if have remote power button inside car, if it works power is good. Defective key fob would then be indicated.

Sep 18, 2009 | 2006 Toyota Solara

Not finding what you are looking for?
2006 Nissan Altima Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

79123 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...