Question about 1993 Chevrolet Lumina

Open Question

I need a wireing diagram of a 1993 Chevy lumina van APV distributor pics of wich wires go on ignition module plug

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Bamm88
  • 7 Answers

SOURCE: 93 chevy g20 van

More than likely it's the distributor. They have a tendency to build up corrosion and rust and have personally went through the same situation three weeks ago on a suburban. Check to see if you are getting spark from the distributor first. Have the ecm in the distributor checked at Oriellys for free. It's under the rotor and has two 8mm head bolts with wires plugged in at each end.

Posted on Jun 22, 2008

SOURCE: 1996 chevy express van audio wiring diagram

go to www.the12volt.com

Posted on Aug 31, 2008

  • 1 Answer

SOURCE: chevy Lumina 3.1 APV won't start.

it maybe a knock sensor

Posted on Mar 08, 2009

  • 834 Answers

SOURCE: Firing order of the distributor and of the plugs

Here is the diagram for a 1992 Lumina 3.1 Litre engine with a distributor.


34fb518.gif

Posted on May 05, 2010

  • 834 Answers

SOURCE: I just changed the plugs and wires on a 94 Chevy

Here is the firing order for the 1994 Chevrolet Lumina APV Van with a 3.1 Liter engine with a distributor, and the 3.8 liter engine had the coil packs, and let me know if you need any help to understand this diagram, or if you require any further assistance.


5b212ce.jpg

Posted on Oct 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need diagram of firing order of spark plug wires from the distributor cap on a 1995 chevy lumina apv 3.1


See if this helps:

http://www.fixya.com/cars/t6469086-just_changed_plugs_wires_94_chevy

May 28, 2014 | 1998 Chevrolet Lumina

1 Answer

I just changed the plugs and wires on a 94 Chevy lumina van.after doing so it didn't idle right and skips. I thought it was maybe the spark plug wires but I can't find the order for this van. It has the...


Here is the firing order for the 1994 Chevrolet Lumina APV Van with a 3.1 Liter engine with a distributor, and the 3.8 liter engine had the coil packs, and let me know if you need any help to understand this diagram, or if you require any further assistance.


5b212ce.jpg

Oct 19, 2010 | 1994 Chevrolet Lumina APV

1 Answer

Do you know the firing order and #1 cyl. on the cap for a 1993 chevy lumina apv van 3.1 eng.


The firing order is 1-2-3-4-5-6.
When looking at the front of the van, #1 is on the left towards the rear. #2 is on the left towards the front, #3 is in the middle rear, and so on. The distributor rotates clockwise
If #1 terminal is not marked on the distributor, rotate the engine to the timing mark for TDC. At this place, the rotor will point to either #1 or #4. You can assume it's #1 and wire it up. If you're wrong, the engine will not start as all plugs will fire on the exhaust stroke and no harm will be done either. If that os the case, you know you just have to rotate all the wires 3 places.

Sep 08, 2010 | Chevrolet Lumina APV Cars & Trucks

2 Answers

My lumina mini van wont start i spark i fuel pressure. i dont have a check engine light on


If you have spark and fuel pressure, then the most likely cause of the problem is that there is no injector pulse to fire the fuel injectors, and the signal for the injector pulse is generated from the ignition module that is located inside of the distributor and it might be malfunctioning, or you might also have a loose wire connector or a faulty computer (ECU/ECM-PCU/PCM).

You can remove the ignition module from the distributor and have it tested for free at most auto part stores.

If you replace the ignition module with a new one it should come with some silicone grease or a die-electric compound and be sure that it is with the new module when you purchase it. The silicone grease or die-electric compound must be used to completely coat and cover the metal contact surface under the ignition module where it mounts to the distributor, and do not leave any of the metal contact surface of the ignition module un-covered by the grease or compound because it is a heat sink and the module will over-heat without it, and also be careful that you do not over-tighten the ignition module or it will be damaged.

Be sure that you clean the mounting surface for the ignition module inside of the distributor before you install the ignition module.

Jun 07, 2010 | 1993 Chevrolet Lumina APV

1 Answer

I have a several problems whit the electrical installation


there is lots of wiring diagrams
wich one u need
sorry

May 08, 2010 | 1993 Chevrolet Lumina APV

1 Answer

Firing order of the distributor and of the plugs for a 1992 chevy lumina apv 3.1L


Here is the diagram for a 1992 Lumina 3.1 Litre engine with a distributor.


34fb518.gif

May 05, 2010 | 1992 Chevrolet Lumina APV

1 Answer

I need a list of the parts need to turn up the chevy Lumins Van.


Tune up should include.Plugs,distributor cap,rotor,air filter,fuel filter,if plug wires have never been replaced then replace plug wires,pcv valve.Use good name brand parts.Don`t get cheap stuff.Make sure and gap the plugs.The specs.decal should be under the hood or on the hood itself.The plug gap is .045.Also use die electric grease on plug wires.It is usually supplied with wires.Hope this helps.Good luck.

Jan 11, 2010 | 1990 Chevrolet Lumina APV

2 Answers

1990 chevy lumina apv - pickup coil -runs ok 15 mi & stalls


I'm assuming you have the distributor out? You will need to, as the shaft has a gear on the bottom end that has a roll pin. Make sure ALL is marked so that you re-assemble it the same way. You also need to mark the rotor position, and the base of the distributor so you can put it back where it was, or you will have to re-align and time everything!

Jul 10, 2009 | 1990 Chevrolet Lumina APV

1 Answer

No spark on an apv chevy lumina with 3.1 liter engine


autozone will check your ignition module free if you bring it in. If it's a 3.1, you may need the coil under the distributor cap too.

May 03, 2009 | 1993 Chevrolet Lumina APV

Not finding what you are looking for?
1993 Chevrolet Lumina Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...