Question about Cars & Trucks

Open Question

High beam does not stay when activated - Cars & Trucks

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: headlight Problem - 1992 Plymouth Voyager

check and see if the dimmer switch is working, it's most likely stuck. it might also be the headlight relay.

Posted on Jun 16, 2008

Ad
pal03246
  • 726 Answers

SOURCE: headlights high beam light inside stay on

Do you have an aftermarket hitch?? I have seen a lot of issues with people having U-HAUL hitch installed with the convertor box. Whell, when the convertor box is installed, u-haul uses scotch locks, which after a while causes all kinds of electrical issues. including head light issues. Also check the convertor box. It may be faulty. Nissan make a very nice harness for the truck. no splicing needed. There is a single connector behind the bumper on passenger side. Get harness. That is if you have the u-haul convertor. If you dont, I would be looking at the head lamp switch.

Posted on Jul 19, 2008

  • 214 Answers

SOURCE: headlights go out when high beam switch is activated

Could be a blown fuse or maybe both globes are burnt out.

Note: Low beam lights are turned off when high beam is selected.

Posted on Dec 07, 2008

RJones1125
  • 373 Answers

SOURCE: 1996 ford thunderbird high beam switch does not

you may need to replace the switch assembly inside the steering column

Posted on Apr 12, 2009

skychief2001
  • 21873 Answers

SOURCE: High beams will flash but will not stay on.Maybe blown fuse?

Usually a problem with the dimmer switch. A mechanic would check for power at the dimmer switch for both circuits.

Posted on Aug 17, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

While low beams on the left high beams stays on dim light but wen I turn high beams on they work fine


It could be driving lights mode instead of low beam. Check connections.

Jun 16, 2017 | Cars & Trucks

1 Answer

1998 ford ranger low beams work high beams do not


if the high beams bulb filaments are good then it could be the dimmer switch is not working. you should hear a click when activating the switch. if not then check to make sure the rod that pushes on the switch is moving far enough to activate. if not adjust switch. if it is clicking the switch is probably bad.

Sep 24, 2014 | Cars & Trucks

1 Answer

High beams flash but don't stay on


you'd have to play with it and see if it's related to maybe a stuck fog light or simply the high beam switch is junk

Mar 25, 2014 | 2006 Pontiac G6

1 Answer

2001 grand prix high beams won't stay on


Dimmer switch loose/out of adjustment. Lower steering column gently, find the dimmer actuated witha metal rod. hold the rod in place this is imperitive. Loosen up the switch and tap it up toward the steeringwheel 1/16th an inch at a time untill it works properly. May need to replace the switch, if so just make sure you hold the rod in place with tape or something, because if the rod falls down, you may have to remove the steering wheel to get it back in place.

Dec 15, 2013 | 2001 Pontiac Grand Prix GTP

1 Answer

Is my 2007 Lincoln Navigator (HID headlights) equipped with HIGH BEAMS? If so - they don't seem to work. Allow me to explain; 1. The headlights come on automatically in low light conditions. 2. The...


First of all are your headlights a double filament type headlight? If yes then I would suspect that a power wire to the high beams is broken or shorted. If your high beams are a separate set of lights from your regulars running lights then either the high beams headlights are missing. or has a broken power wire or shorted or...You could check the fuse box under your dash and under the hood of the car to see if you have a fuse for the high beam lights.

Oct 28, 2013 | Cars & Trucks

1 Answer

Replace headlight relays 1999 lexus rx300


Moe likely a bad earth for one of the lights as one light is working through another causing one to stop working

Feb 06, 2013 | 1999 Lexus RX 300

1 Answer

I have a 1999 ford explorer sport and low beams not workiing.


replace driver module relay .it controls the low beam lights.

Apr 28, 2009 | 1999 Ford Explorer

1 Answer

Headlights go out when high beam switch is activated


Could be a blown fuse or maybe both globes are burnt out.

Note: Low beam lights are turned off when high beam is selected.

Dec 07, 2008 | 2005 Chevrolet Cavalier

1 Answer

Headlight Problem - 1992 Plymouth Voyager


check and see if the dimmer switch is working, it's most likely stuck. it might also be the headlight relay.

Jun 15, 2008 | 1992 Plymouth Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...