Question about 2000 Chrysler 300M

1 Answer

2000 Chrysler 300M. Gauges and controls not working

I have a 2000 Chrysler 300M. This morning after leaving the ignition switch in the ON/RUN position for about 15 minutes, the cluster gauges, climate controls, Day/Night Mirror, overhead console display, sunroof controls, will not work any longer. How can I fix this? a blown fuse??, Thank you in advance.

Posted by on

  • Anonymous Mar 24, 2014

    2013 Chrysler 200s, passenger window will randomly work or not work both from the passenger side switch and the drivers side master switch. last night it would only go down, until I had the car off for about 15 minutes, this morning it won't work with the drivers side control. any thoughts?



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 99 Answers

How about if you disconnect the battery for 10 sec and reconnet. if no fix look for blown fuse under the hood look also near the steering column for more fuses

Posted on Jul 21, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Chrysler 300M p1391 code misfires when hot.

From research Chrysler is having a lot of this same problem. If it were another vehicle I would say it's either ignition module or pickup coils going bad. Some vehicles have had problems with wires to pickup coils (Hall effect coils) getting hot and shorting due bad wire insulation. One cause is oil or dirt getting on pickup coils, cam position sensor, also if cam is worn and moving any that will affect the gap between sensor and cam. You didn't say how many miles were on the car.

Apr 30, 2017 | 1999 Chrysler 300M

1 Answer

Unlock Instructions ignition for Chrysler 300M

This happened with my 2000 Ford Focus. To Unlock the ignition, put the car key in, and hit it gently with a hammer. The ignition tumbler will lock again when you take out the key, so have a hammer handy if you go somewhere :P.It happened to me on November 7th, the tow truck driver came, did this, and started the with no problems.

Nov 09, 2011 | 1999 Chrysler 300M

1 Answer

2000 Chrysler 300M - Iddles irradically after it first starts, then runs fine after a while, however the check engine warnig indicator is always on now. Any ideas on what to check? Thank you in...

I'll try to help you out. First, try and get the check engine light codes. You can do this yourself in the car.

With the car off:

Put the key in the ignition.

Turn it to the "ON" position (don't crank), then off, on, off on.

Then leave it in the ON position, and a code should come up in the odometer reading.

You should complete the cycle in under 5 seconds.

If you can update me on the code I could tell you what it means.

Aug 15, 2011 | 2000 Chrysler 300M

1 Answer

My 2000. Chrysler. 300M. Is still misfiring. After changing all ignition coils and spark plugs, what a possibl solution

Did you have the ignition controll module checked? It is what the coils strap to. If part of it is bad it will cause a misfire. You can remove it take it to your local parts stor and have them check it for you. Good luck!

May 11, 2011 | 2000 Chrysler 300M

1 Answer

We have a 2003 chrysler 300m. Shut car off this morning and now key will not turn ignition switch

You might try turning your steering wheel back and forth and maybe changing your tilt while trying to turn the key. It sounds like your steering wheel lock is stuck which is common. Sometimes it just takes playing with it to get it to turn. Another problem that causes this is the gear selector not being in the right spot causing it not to let the ignition turn. Hope this helps and good luck!

Jul 11, 2010 | 2003 Chrysler 300M

1 Answer

Need cylinder numbering order for a 200 chrysler 300m, front wheel drive. The engine is not tranverse mounted. Thanks, Rick B

For the 2000 Chrysler 300M 3.5L:

Firing Order:


Ignition Coils on respective Plug

Mar 19, 2010 | 2000 Chrysler 300M

1 Answer

I have a 99 300m with the error code no bus on the odometer along with all gauges reading 0 and the heater turning its self on and off what could this be? also when hooked up to an odm reader it says no...

try to remove negative ground from battery or from jumpm start atachment. car should lose energy.. leave it 30 min.

or first u can try to turn on and off ignition key 3 times fast.. when i do that on my 300m on board says something "done" sory for bad english i hope i helped u..

Sep 22, 2009 | 1999 Chrysler 300M

1 Answer

My sunroof quit working in my 2000 Chrysler 300M

First check the fuses,then locate the switch and use a test light to see if the switch has power and ground.If power is going out of the switch to the roof motor and it does not work it is probably bad.

Jul 25, 2009 | 2000 Chrysler 300M

Not finding what you are looking for?
2000 Chrysler 300M Logo

546 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides