Question about Hyundai Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
thei are screws in the door hidden by caps that you need to take off the door and near the mirror shoud pop off
Posted on Jan 24, 2009
Your Local Auto Parts Store has the Tool that you need for this Removal. Some of them will let you Rent it instaed of paying the 50.00 Bucks for the Tool.
Posted on Jan 24, 2009
This is out of my haynes manual
1 disconnect negative battery cable
2 on manual window equipped modesl remove the window crank using a hooked tool to remove the retainer clip.
3 on power window equipped models pry out the armrest switch control plate and disconnect the electrical connections
4 detach the armrest pull handle retaining screw then remove the inside door handle trim bezel
5 insert a wide putty knife, a thin screwdriver or a special trim panel removal tool between the trim panel and the head of the retaining clip to disengage the door panel retaining clips.then remove the remaining door panel retaining screws at the lower edge of the door panel.
6 once all of the clips are screws are disengage detach the trim panel disconnect any electrical connectors and remoe the trim panel from the vehicle by gently pulling it up and out.
7 for access to the inner door remove the door panel support bracket then peel back the watershield taking care not to tear it. it install the trim panel first press the watershield back into place. if necessary add more sealant to hold it in place.
8 installation is the reverse of removal
Posted on Mar 20, 2009
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
Tips for a great answer:
Feb 04, 2014 | 2002 Buick LeSabre
Dec 22, 2012 | 2000 Hyundai Sonata
Nov 29, 2010 | Hyundai Motor 2002 Sonata
Jul 14, 2009 | Hyundai Motor 2002 Sonata
Jul 09, 2009 | Hyundai Motor 1998 Sonata
Jul 03, 2009 | Hyundai Motor 2002 Sonata
Jun 11, 2009 | 2006 Hyundai Sonata
Apr 18, 2009 | 2001 Hyundai Sonata
Apr 11, 2017 | 1996 Hyundai Sonata
Jul 25, 2008 | 2000 Hyundai Accent
Aug 19, 2017 | Hyundai Cars & Trucks
20 people viewed this question
Usually answered in minutes!