Question about Toyota Cars & Trucks

Open Question

I need to see on a toyota 4x4 what are the components needed to assemble the gearbox crossmember

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 23 Answers

SOURCE: Hi, need diagram of 1997 VW Polo diesel gearbox

Hi Paul, Most of these gearboxes were almost identical for vw during the those years, some manuals are available free from this site
http://carservicemanuals.blogspot.com/search/label/Volkswagen
Hope it will help you out.
Dave

Posted on May 27, 2010

  • 3519 Answers

SOURCE: How do I replace a front suspension crossmember on a Chevy Silverado 2500 HD 4x4?

The actual crossmember is not very heavy but since it is bent, there may be other "stressed" portions of the frame.
- I would slack off the bolts to determine the effect before fully removing them. Also would measure betweeen the bolt holes on the replacement and the bolts on the vehicle. If the distances are different, some frame moving may be required. That could take some force.
- If the slack bolt position allows the crossmember to be wiggled easily, I'd remove it and work at getting the replacement installed.
WORK SAFE! Don't get under the vehicle unless it is on a hoist or on jack stands.

Posted on Oct 22, 2015

Testimonial: "I have plenty of room to work underneath without jacking up the truck, do I need to raise the vehicle so that the front wheels are off of the ground?"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace a front suspension crossmember on a Chevy Silverado 2500 HD 4x4?


The actual crossmember is not very heavy but since it is bent, there may be other "stressed" portions of the frame.
- I would slack off the bolts to determine the effect before fully removing them. Also would measure betweeen the bolt holes on the replacement and the bolts on the vehicle. If the distances are different, some frame moving may be required. That could take some force.
- If the slack bolt position allows the crossmember to be wiggled easily, I'd remove it and work at getting the replacement installed.
WORK SAFE! Don't get under the vehicle unless it is on a hoist or on jack stands.

Oct 22, 2015 | Cars & Trucks

1 Answer

Ride height


Toyota state that 10.4 inches is the ground clearance for an '03 Tundra.

I would expect that number is taken from the lowest point of the chassis to the ground. EG gearbox crossmember.

Sep 05, 2014 | 2003 Toyota Tundra

1 Answer

2003 Toyota Tacoma TRD 4x4 Dbl Cab.......is it supposed to have a cross member for the transfer case?? It has the mount on the bottom of the transfer case with rubber and bolt holes. Looks like there...


best place to go is the salave yard to see it it actually has one to start with
severe movement is engine and transmission mount problems and some makes have a heavy weight attached to the transfer case to even out vibrations and normal movement

May 16, 2017 | Cars & Trucks

1 Answer

4X4 jerks forward and backwards


Toyota issued a recall on 2000-2003 model year Tundras regarding rust problems of a rear crossmember. This recall involved 110,000 vehicles and followed a similar action for the Tacoma

Nov 06, 2012 | 2000 Toyota Tundra

1 Answer

My automatic gearbox 4x4 of the 1997 Rav 4 works only a few minutes and then it fades away. Like worn clutch plate.


You rebuild it not buy a new one. You can order the parts in a kit and find a good mechanic to install the overhaul kit. You can order it from www.rockauto.com they ship overseas

Jul 13, 2012 | 1997 Toyota RAV4

1 Answer

I have a 1992 toyota pickup 4x4 2.4 manual trans that trys to engage into 4 wheel drive on its one and whene i want it to it wont go in 4 wheel drive. I ALSO NOTICED that the 4x4 indercator light will...


G'day mate yes you have a prob and i think it is empty 'transfer' case Toyota had a big prob with transfer case pushing oil into gearbox , result transfer case empty gearbox full. fix is when you get the transfer case off (maybe have stripped and checked ) then drill a small hole in the front of the transfercase at gearbox filler bung height and run the same oil in both if its a manual that is. hope this helps

Apr 04, 2010 | 1992 Toyota Pickup

1 Answer

Does the 95 corolla have a subframe that needs removing to get the gearbox out


You would have to unbolt crossmember one side so you can open it enough for the gearbox to pass through. On the other side just loosen them but don't take out the screw all the way.

Aug 04, 2009 | 1995 Toyota Corolla

1 Answer

Can not find the clutch on the engine a toyota


the clutch is between the engine and gearbox .take off the gearbox and you will see it between the pressure plate and flywheel.

Jul 14, 2009 | 1991 Toyota Pickup

2 Answers

Gearbox change


DID YOU GET THE BANDS ADJUSTED ON THE REPACEMENT BOX?BECAUSE IT SOUNDS ABIT LIKE IT ISNT THAT MUCH BETTER THAN THE OLD ONE POSSIBLEY A BAND ADJUSTMENT MAY HELP

Apr 05, 2009 | 1989 Toyota Land Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...