Question about Ford Cars & Trucks

1 Answer

Ignition ford focus 2008. car not starting when key is turned to the on position.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 4,740 Answers

The starter won't crank. If nothing happens when you turn the ignition key to the "Start"position, it means that the starter motor doesn't turn over the engine. Most commonly this could be caused by a dead battery; here is How to check the battery. ... The starter motor itself or a starter solenoid could be bad.13 Aug 2013

Why a car won't start - troubleshooting tips - Samarins.com

www.samarins.com/diagnose/ https://www.google.co.uk/webhp?sourceid=chrome-instant&rlz=1C1CHBD_en-GBGB719GB719&ion=1&espv=2&ie=UTF-8#q=car%20not%20starting%20when%20key%20is%20turned%20to%20the%20on%20position.
see if this link helps you out.

Posted on Dec 18, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of anti theft fuse on 2008 ford focus


Fuse 20 is the ECM fuse. No car would have one specifically for the antitheft circuit as you could pull the fuse and drive away. The ECM runs the antitheft system as well as the engine management. As long as the chip in the key matches the chip in the ignition lock, the ECM will release power to the ignition circuit.

Do you have an OBD11 code reader or access to one? That may tell you where the fault is.

http://www.gridgit.com/postpic/2009/11/ford-focus-fuse-box-diagram_486663.jpg

http://circuitswiring.com/2008-ford-focus-5d-r-fuse-box-diagram/

fuse on 2008 ford focus Google Search

Dec 18, 2016 | Ford Cars & Trucks

2 Answers

How to start a Ford Contour with out my key


Probably can't be done if it is late enough to be fitted with a security system. In that case the key will have a coded transponder which the system will recognise and send a signal the the engine management to switch it on.

You either need a correctly coded key or remove the engine ECU and have it decoded.

Jan 23, 2016 | Ford Cars & Trucks

1 Answer

Have to push key real hard to start...Will not start at all now


2008 Ford Escape Have To Push Key In Ignition Very Hard ...

www.carcomplaints.com/Ford/Escape/2008/.../have_to_push_key_in_ig...
push key switch in hard to start 2nd time (3 reports) ... Our next step is to replace the lock housing assembly or the ignition lock cylinder. ... The ignition switch on my 2008 Ford Escape randomly turns over -- apparently when it feels like it.

Ford Escape ignition switch no start switch replac - YouTube

? 1:10
https://www.youtube.com/watch?v=bv8tDCf83Vc
Jan 28, 2014 - Uploaded by mosaitogo
Sometimes vehicle would not start when crank/start pos. ...having to push in on the key because the tip of rod is jumping out of switch . .... I currently have my ignition switch dangling down, and I just manually turn it with a screw driver .... Thanks I had this issue since last year with My Ford Escape 2008 but ...

22 Ford Vehicles No crank/ No Start Trick - YouTube




Dec 26, 2015 | 2008 Ford Escape

1 Answer

2008. What is the color of wire for the power to the ignition?


Use a multimeter to backprobe the wires at the ignition switch. You want a powered accessory wire (not the ignition wire) that shows 12V with ignition on in both the accessory (turn key counterclockwise) and run (turn key clockwise one stop) positions but not in the start position (key fully clockwise).

Jul 31, 2015 | Ford F-150 Cars & Trucks

1 Answer

Where is the bonnet release catch on a ford focus


Go to the ford badge at the front of the car
Swivel the badge (its spring loaded)
Insert your ignition key and turn to the left (position 1)
The bonnet should pop up
Turn the key to the right (position 2)
You can now lift the bonnet.

Sep 20, 2010 | 2002 Ford SVT Focus

2 Answers

Key stuck in ignition of 2005 Ford Focus. Tried jiggling steering wheel while turning key, tried moving from Park position. Car starts, but I have to use the extra key to lock car. Also, does the...


your ignition have to be replaced focus 2002/7 have that problem and a lot more often if you have a lot of other keys with it,try some wd40 ,but if you do take the key out replace the ignition or you going to get stuck.

Aug 03, 2010 | 2005 Ford Focus

1 Answer

I need to reprogram the car door keypad on my 2003 Ford Focus.


Programming
When
Key(s) added or replaced. System malfunction.
How
Obtain all keys fitted with remote control. Fasten seat belts and close all doors. Turn ignition switch from position I to position II 4 times within 6 seconds. Switch ignition OFF. Programming mode activated for 10 seconds proceed as follows: Press and hold lock, unlock or boot release button Fig. 1 [1], [2] or [3]. Wait for acoustic signal (indicates correct programming). Repeat above procedure within 10 seconds to program remaining keys. To exit programming mode: Turn ignition switch to position III or wait 10 seconds. Keys can also be programmed using diagnostic equipment.
NOTE: A maximum of 4 keys can be programmed.

Feb 18, 2010 | 2003 Ford Focus

1 Answer

The central locking on my ford focus has stopped working, i have changed the battery in the key fob but no luck, can you help. graham.


Obtain all keys fitted with remote control. Fasten seat belts and close all doors. Turn ignition switch from position I to position II 4 times within 6 seconds. Switch ignition OFF. Programming mode activated for 10 seconds proceed as follows: Press and hold lock, unlock or boot release button Fig. 1 [1], [2] or [3]. Wait for acoustic signal (indicates correct programming). Repeat above procedure within 10 seconds to program remaining keys. To exit programming mode: Turn ignition switch to position III or wait 10 seconds. Keys can also be programmed using diagnostic equipment.
NOTE: A maximum of 4 keys can be programmed.

Jan 06, 2010 | 2001 Ford Focus

1 Answer

How do you get the key ignition out of a 2000 ford focus?


there should be a button on the bottom of the column to release the key from the ignition ad put the ignition in the lock position

Jan 19, 2009 | 2000 Ford Focus

1 Answer

My key will not turn in my 2000 ford focus has anyone had this problem and not had to replace ignition


Will the key go in and out of the ignition? If you can take the key from the ignition, I would use WD40 and lubricate the ignition lock until it is almost overly lubricated and take the key and push it in the lock and tap the end of the key into the lock with a hammer (remember, I said TAP). These things might get your car ignition to work long enough to get your car ignition into the ON position. at that point removal of the ignition cylinder is very easy. if you can't get the key to turn go to this page to see about drilling out the lock so it will turn. http://www.autosafety.org/2000-2005-ford-focus-ignition-lock-cylinder.

Go to this website and get in contact with Tousley Ford. They have great prices on ford parts if you are in the USA.
http://forums.focaljet.com/tousley-ford/

I just changed out the ignition cylinder in my 2002 Focus and it was a five minute job because I could get the old cylinder in the ON position and didn't have to drill it out. and Tousley ford did me great on the price!
Good luck.

Nov 30, 2008 | 2000 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...