At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
now to remove a pipe to hose at core can be hard.
we cut them off, with sharp knife there so we DO NOT damage the core tube (nobody want to remove the whole dash ,doing this wrong)
I cut them off and replace with new.
any mech knows this so have them do it.
heater cores are very fragile. do not forget this.
Removal
1. Disconnect the negative battery cable.
2. Remove the instrument panel.
3. Recover the refrigerant.
4. Remove the heater/air distributor case assembly.
5. Remove the wiring harness and electrical connectors from the heater/air distributor case assembly.
6. Remove the screws that connect the heater core housing and the evaporator housing.
7. Separate the sponge from heater/air distributor case assembly.
8. Remove the heater core cover screws from the heater core housing.
9. Remove the heater core.
Installation
1. Install the heater core into the case.
2. Install the screws on the heater core housing.
Tighten: Tighten the heater core cover screws to 1.2 Nm (11 in. lbs.).
ok the dash heater core that hose.?
is the hose leaking? that it?
read here for 4 bucks, heater cores can be very hard long work to service, getting to the rear clamps on all cars are iffy.
check thermostat may have put it in rong it will make a difrence also make sure all your belts are spinning may have bad pully and not spinning water pump
The only place I know of to get a heater core for a Suzuki Forenza is from a Suzuki dealer or a Suzuki parts place online. After everything said an done, you will pay about $200 for an OEM heater core. Part # is 74120-85Z00.
As for the location, it's in the heater/air distributor case assembly in the dash board.
×