Question about Nissan Cars & Trucks

1 Answer

Why is my Nissan Note shaking when sitting idle? The Rev needle is sitting below one. Tia

Posted by Anonymous on

  • Anonymous Dec 17, 2016

    Thanks for your advice, I will book it for a service.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Nissan Master
  • 44,271 Answers

Indications are that there is an injector/s problem could just need a quality injector cleaner in the fuel or have the injectors cleaned and services

Posted on Dec 17, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 nissan pu 4x4 3.0 v6 air conditioning problem is cooling some. Low side 60 lbs of pressure: cooling on highway. At idle 60 lbs needle shakes somewhat. Was at one time cooling good this summer....


What is the high side reading? That's too high for low side maybe overcharged. Plugged expansion valve (no orifice tube) will cause low to neg psi low side.

Aug 19, 2014 | Nissan Cars & Trucks

1 Answer

2004 ford 6cly rough idle must keep giving gas


V6? does it get any better when it warms up? Does RPM rev hi to low or does it sit at one speed and shakes? Hows the plugs? first thing first, buy a can of carb/choke cleaner $ 5.00 . Remove any plastic motor cover plates that would expose the motor. Spray cleaner around the base of the intake manifold and all mating areas of the intake manifold. ( not into the air intake) does the motor rpm change or rev up? if yes, you have bad intake gasket. also spray and check all air (vacuum) hose connections for proper fit and no cracks. Check plugs and note color and condition of each and what cylinder it was from, a brown paper bag color is normal, a super clean look is lean possible coolant leak, a burnt or melted electrode is early detonation timing, oil carbon deposit bad rings or valve guides,seals, wet is to rich , air fuel mix. Several things cause this, check all seals,air lines first,air filter, cracked or split intake tube, gasket check, does it run rough at cold idle only ( possible temp sensor ) you can check alot of things to eliminate without spending cash,

Jan 10, 2011 | Ford Taurus Cars & Trucks

1 Answer

Took my 1996 Jeep Grand Cherokee Laredo to the shop because it has been dying on me while driving also its been rumbling now i got it today they said they changed some parts but now its worst they took...


It has this problem at Idle? If this problem is while the vehicle is moving but not at Idle or when you rev the motor check your A frame, Connecting Rods, Tie Rods and Ball joints. You also want to check to loose lug nuts or a bent rim. If it occurs when it sits at idle check the motor mounts and bushings and the transmission mounts and bushings.

Sep 15, 2010 | 1996 Jeep Grand Cherokee

2 Answers

1997 Nissan Hardbody has rough idle/surges/stalls


ok i have the same truck my timing was off 3 teeth but mine wouldn't kick out of high idle is y mine was surging but know with timing right no vacuum leaks i cant get it below 1400 but when a vacuum turns on it almost kills my engine any thoughts i know i got a vacuum line mixed up idk were though

Mar 13, 2009 | 1997 Nissan Pickup

1 Answer

Erratic idling.golf3


Your clutch release mechanism is failing,,take it to a repair shop and have it looked at.
If the system fails all together while driving it could cause you grief.

Jan 27, 2009 | 1999 Volkswagen Golf

1 Answer

Timing at idle is more than 1000rpm


It appears the car may not be entering tuneup mode. warm up until temp is normal, idle stays below 1000 rpm
2000 rpm for 2 minutes
rev engine 2-3K three times
idle for one minute

turn off
disconnect tps
start
rev 2-3K three times
adjust timing

Oct 02, 2017 | 2004 Nissan Sentra

3 Answers

Crankshaft position sensor for 2004 nissan sentra.


will the crank sensor cause the vehicle to shut down while running?

Nov 14, 2008 | 2004 Nissan Sentra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...