Question about Cars & Trucks

1 Answer

When I turn the key on my 660 bear cat I can't hear the fuel pump.warmed up the relay but no go.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

If the pump hasnt ran the o rings might b stuck ,i removed mine soeked it in hot water then hooked up a battery and pumped some water through worked fine for the rest of the season but had to do it again the next fall

Posted on Dec 17, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why the fuel pump don't run and the relay don't click when i turn the key on?


If you can't hear your fuel pump priming then either, the pump needs replacing or the relay. If you replace the relay and you still don't hear the pump prime then it's the fuel pump.

Oct 26, 2016 | Cars & Trucks

1 Answer

Why does the fuel pump relay don't click when i turn the key to run? and why there is no power at the fuel pump relay?


the operation of most fuel pumps is controlled by the fuel pressure regulator
when the fuel pump gets to set pressure , the pump is switched of by the ECM at the relay level
maybe nothing wrong with your system just the system working as designed
if you have pressure in the fuel manifold when you turn the ignition on then the pump will not run but will if there is a fuel leak somewhere and the pressure drops off

Oct 25, 2016 | Cars & Trucks

1 Answer

Pcm


Did you check the fuel pump relay ? The relay gets power from a fuse and also from the PCM relay. The computer grounds the relay to turn it on for 3 seconds when you turn the key on, then only after the computer "sees" RPM or oil pressure.

Feb 05, 2014 | 1997 Ford Explorer AWD

1 Answer

No fuel pressure on 1993 Dodge Dakota, How do I check the fuel pump? I cannot hear it run.


If you cannot hear the fuel pump prime up when you turn the key to on there is a fault with your fuel pump. check the fuse in the fuse relay box and the 2 wired connections on the fuel pump, if still no good than replace the fuel pump

Oct 09, 2012 | 1993 Dodge Dakota

1 Answer

Fuel pump does not turn on


Can you hear the pump hum for 5 seconds when key is turned to ON?

Check & reset inertia switch (see onwer manual for location). Check Fuel pump relay after that.

PCM, computer turns on fuel pump relay when required.

Power relay turns on PCM when key is ON.

Aug 09, 2011 | 1996 Ford Windstar

1 Answer

How do I check to see if my fuel pump relay is gone bad on a 01 acura cl s series


hi there,
first of all
listen for fuel pump noise when turn the key On if you can hear the noise then the relay and fuse re ok,
if you can't hear pump working then first check FPMP fuse, if it's got voltage and good. Then with key off, remove f pump relay, turn key On and try it installing the relay back so you have to hear the click when you put relay, that's the best way hope this helps!

Aug 01, 2011 | 2001 Acura 3.2CL

1 Answer

Engine turns over but does not start. I poured


Either a bad fuel pump or fuel pump relay. Take off the gass cap, have someone listen where the gas cap goes. When you turn the key to the on position you should hear the fuel pump run. If not, find the relay under the hood. Swap the relay with the one next to it (temporarily) Turn the key off then back on. If you hear the fuel pump running then replace the relay. If not the fuel pump is bad. Which is usually the problem.

Please Vote! Thanks!

Aug 31, 2010 | 1995 GMC Sonoma

2 Answers

92 honda civic turns over fine but doesnt start


ok, this is a commom problem with this 92 hondas,

it may be the pump fuel relay, which is under the dash on the driver side by the fuse panel.

here is a way to determine that.

when you turn the key on the on position

do you hear the fuel pump running while the engine light is on, and does the pump stop running afteer the engine light goes off?

if you do hear the pump running then it means that fuel pump is working fine ( since it way just replaced), but if you don't hear it running while the check engine light is on ( about 2 seconds) chances are the fuel pump relay is not working as it should.


also there are clicks that have to be heard on the starting process.

1 when you turn key to on possition

2 when the check engine light goes off( a click has to be heard just after it goes off)

3 after the car starts

If you don't hear this clicks, try to get your ear close the location of the fuel pump relay( near the fuse panel under the dash).


the fuse relay is just a bunch of circuits soldered, so you can get it to someone who knows how to solder and fix it.

or just get a replacement one at any junkyard. ( cheapp)

Nov 30, 2008 | 1992 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...