Question about Cars & Trucks

Open Question

Np200 when selecting gears it wont move - Cars & Trucks

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Can not select any gears to move tractor. need to know of possible cause for shaft to be locked in one position

depending on model. could be the link catch has come loose and just moving up and down of the grip. or the clutch engaging mechanical switch is not working so wont allow gears to be moved. can also be low gear oil, or even water in the gearbox this would corrode the top and stop gear movement.

Apr 16, 2018 | Cars & Trucks

1 Answer

My NP200 has a krrrr noise when de-accelerating louder in 2nd gear replaced Bearings, oil pump and valve lifters, still noise stays. any suggestions

drive your np200 with closed windows interior fan and radio off and try to locate the noise as in the engine is on right and gearbox is on the left when in the drivers seat that info will be a great help to diagnose your issue

Jul 20, 2016 | Cars & Trucks

1 Answer

My Np200 1.6. Gear 1,3,4,5,R they get in gears but gear 2 dont want to get in gears.

is it manual or automatic with a manual mode/sports mode?

Either way it sounds like second gear has simply worn out? if it's a manual it's a matter of replacing a clutch plate for that gear, if it's an automatic, it's a bit tricker and involves replacing a band and possibly rebuilding the entire transmission

May 09, 2016 | Cars & Trucks

1 Answer

My question is I have a Hyundai 2006 while im driving the car go to D and D1D2D3.when is in D1 it dnt wanna drive fast .I wanna know what cause dats my first car and I love the car .please help me

All transmissions start in a low gear that is not meant for speed. When it is in D1, the transmission stays in 1st gear and wont move to a higher gear by itself. When you select D2 it starts in 1 and moves to 2 and then wont move any higher.

May 26, 2015 | Hyundai Cars & Trucks

1 Answer

Replace a serpentine belt on a Nissan NP200

Nissan NP200 Using a short socket of appropriate metric value, and a pry bar; Push the pry bar toward the firewall to loosen the tension on the belt. It's not that hard once you buck the initial spiral spring pressure of the tensionor. I have even pryed against the tensionor with a blunt heavy bar and moved it enough to free a Belt.

Oct 03, 2013 | Nissan Cars & Trucks

2 Answers


if the engine light doesn't light up, when the key is turned on to accessories position, along with other lights, that means that the cars computer is not turned on, powered up. that's why its not starting. the car is not seeing the computer. could be blown fuse, ground side for computer is broken, could be harness issue and it could be the computer itself. start with checking fuses first. check all of them. you may find one burned.

Jul 01, 2013 | Nissan Cars & Trucks

1 Answer


If your shifter wont move to get it in gear, most likely the clutch is not disengaging when you depress the pedal to change gears. Its a hydraulic clutch, check that the reservoir is full on fluid.

Nov 28, 2017 | Cars & Trucks

1 Answer

My gear selecter won't go in gear

wont move... wont go into any gear... when your in Drive does your car just rev... explain

Feb 06, 2011 | 1999 Chevrolet S-10 Pickup

1 Answer

Reverse works now after being fixed, but now wont go past second gear

is the gearchange change connected correctly ,its on a spline underneath and as you move the gear stick this moves the gear selector rod on the gearbox ,you can soon tell as you can select the gears without engine running or the clutch pushed down

Oct 12, 2010 | 2001 Volkswagen Jetta TDI

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

14512 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides