Question about Cars & Trucks

Open Question

HOW DO I FIX VACUMN PUNMP FOR a190 - Cars & Trucks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you change the power steering punmp?


the best thing you can do is BUY a repair manual for it then read it

Mar 14, 2017 | Cars & Trucks

1 Answer

How to fix a backlatch lock to a A190 mercedes


It is easir just to take it to a locksmith to have it done, If you don,t no how to do it,

Nov 27, 2012 | Cars & Trucks

1 Answer

Location cabin filter mercedes a190


Are you sure it has one. Go to your local Advance Auto Parts store and ask for a Purolator Cabin Filter. If they sell you one it comes with detailed instructions.

Jun 10, 2010 | 2000 Mercedes-Benz C-Class

1 Answer

Heater and Air conditioner work bur air flows from window vents only. Can't change direction of air flow to different vents.


There may be a couple of items to look at here.... but the most common problem is a source of vacumn to the pneumatic operation of the heat/a/c vent doors....if vacumn is not distributed properly to the vents you command it is assumed that there is either no vacumn to the selector swith panel(broken vac. line,kinked vac. line, defective in dash a/c control panel) or under the hood a defective vac./heater control valve that is stuck,frozen, not allowing the vacumn to pass through it to supply the indash pneumatic controls and/or panel.
Most vacumn systems that i have ever came in contact with incorporate a vacumn supply tank(nothing more then a round plastic vac. resevoir) which is used in sequence with the a/c heater controls, its purpose is to keep an even vacumn supply to all command points continously while the vehicle is being driven, without this supply one will experience the a/c coming from various different non selected dash vents upon acceleration, this is a direct relation to the tank either being defective(leaking vacumn) or its supply hose(usually vey tiny rubber/plastic tubes) being pinched or broken not allowing the vacumn to the supply tank.
listen for vacumn leaks(hissing sound), look for the obvious...broken vacumn lines or hoses, also check for a defective one way vacumn valve on some pneumatic controlled door vent systems(these valves are inserted in a vacumn line one side being the ""in" port and the other side of it being the "out" flow port,typically if these dont work the vents will also devert your a/c or heat all different ways through your dash.
to check these valves, simply remove from the vacumn hose, and apply vacumn to one side,if vacumn flows through the valve, apply the same vacumn to the opposite side of the plastic valve, if vacumn flows through on the opposite side the valve is bad, it should only allow flow from one side not the other. These valves are small and are usually white or black plastic and look like the old vacumn dash pots used on the old carbureated engines only smaller with one small hose in and one small hose out.

May 16, 2010 | 2004 Buick Rainier

2 Answers

Changed fuel punmp still haveing problems would my fuel problem be a sensor


Check the fuel pump relay or the ASD relay. Using a fuel pressure tester, make sure you have the proper fuel pressure.

Feb 05, 2010 | 1990 Mitsubishi Mighty Max

2 Answers

My 2000 s10 chev does not blow hot air on heat.the heater core is clean.the ac works fine.when you move heater control to heat just luke warm air comes out with temp at 195


PERHAPS SOMEONE HAS REMOVED THE THERMOSTAT. OR MAYBE THE HEAT CONTROL VALVE IS NOT OPERATING IN FULL RANGE. HOPE THIS POINTS YOU IN THE RIGHT DIRECTION. PLEASE LET ME KNOW. THANK YOU FOR USING FIX-YA. AND THANKS IN ADVANCE FOR ANHONEST RATING

May 07, 2009 | 2000 Chevrolet S-10

1 Answer

My 1979 v8 ford auto ecconoline van wont change gear by its self. It will only change from first to second manually. Then to get 3rd i have to get up to 80kmh and wiggle the stick between second and drive...


Check the vacumn modulater on the side of the valve body. there is a vacumn hose going to the end of it. Pull off the hose and watch for transmission fluid. If fluid comes out, change the modular. If no fluid, check the vacumn source.
Bill

Nov 18, 2008 | Ford Econoline Cars & Trucks

1 Answer

Merc A190 ESP intermittent


no worn shocks will not affect electrics ,not sure about the autobox though

Aug 05, 2008 | 1993 Mercedes-Benz 190

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...