Question about Toyota Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hello. Over time, the ignition switch wears and won't pass enough current to operate the starter solenoid. I added a 12V relay, available at Radio Shack and other places. Remove the small wire that runs from the switch to the solenoid, and connect it to one side of the relay coil. Connect the other side of the relay coil to ground. Now, find a 12 volt source (I came off the big terminal of the starter with a 14 ga. wire), and hook it to one of the contacts that moves when the solenoid is energized. Run a wire from the contact that the movable contact hits when the solenoid is energized, and connect it to the small terminal on the starter that you removed the original switch wire from. Check all of your connections, and turn the key. Should start every time, cold or hot. Good luck.
Posted on Oct 04, 2010
SOURCE: how to reset timing belt
if it has a digital odo/ press trip knob until odo is displayed/ press and hold , turn ignition , hold for 4 secounds , release and press again, number 10 will be displayed, keep pressing until 20 comes up, press until odo reading is displayed again, turn ignition off , turn on again , notice the t belt lamp turn off in appros 5 secounds / if not able to reset try this again
Posted on Jul 13, 2012
SOURCE: engine 1kd-ftv toyota it turble
I am a vehicles Mechanic, I have problem with this trouble cods P1226
the car don't give accelrator. If you kindly show me it please.
With best regard
Posted on Apr 21, 2013
Software, or the service manual? You should try to contact Toyota in your country. I think that os the only way.
Posted on Jan 16, 2015
I have found those code to be shown in not only over boost conditions (wastegate) but EGR flow as well as Catalyst conditions.
Being that you are lacking power I suggest you check the EGR for being stuck open, or the catalyst for being clogged.
These engines do not like light driving, you should drive them hard from time to time to kep the catalysts clean of debris.
Posted on Apr 14, 2015
Tips for a great answer:
Dec 18, 2016 | Toyota Cars & Trucks
Feb 10, 2016 | Toyota Cars & Trucks
Apr 14, 2015 | Toyota Cars & Trucks
Apr 14, 2015 | Toyota Corolla Cars & Trucks
Mar 04, 2015 | Toyota Cars & Trucks
Feb 11, 2015 | 2010 Toyota Hilux 2.5
Jan 16, 2015 | 2007 Toyota Hi-Ace 220
Jun 18, 2014 | 2007 Toyota Hi-Ace 220
Oct 27, 2013 | Toyota Cars & Trucks
Sep 20, 2008 | Toyota Prius Cars & Trucks
18 people viewed this question
Usually answered in minutes!