Question about 1992 Toyota Corolla

1 Answer

Ihave a 92 Toyota Corolla 4 door I'm putting the spark plug wires on which came already on new cap I am looking to figure out why not starting fuel rail getting fuel batteries charged turning over

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 5,317 Answers

Could be a problem with your ignition system. So you would not be getting spark at the spark plugs. How-to videos everywhere on how to test for spark. If you have no spark at any of the cylinders, then suspect the "ignitor". This little module is what controls the ignition coil on the car, giving you a spark to a spark plug at the right time. Could be something else, too, like the coil, but you could have the ignitor tested for free at any parts store. (On American cars, this module is known as the Ignition Control Module, or ICM.)

Posted on Dec 17, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota corolla diesel with turbo wont start already genera overhaul, 4 new pistion, spark plug, glow plug( heater) all are new n fuel pump ia working fine but still wont start any suggestion pls...


i could suggest you to look your fuel line and the fuel filter if are free from any restrictions and if the line has a solid line of fuel(no air). air on the filter or on the line, engine really wont start.
and this assume engine timing is ok?

Feb 06, 2012 | 1996 Toyota Corolla

1 Answer

Spark plug wire firing order for corolla 92?


The firing order is 1 - 3 - 4 - 2 running from belt end to transaxle end. The number one cylinder is the one to the far left (if looking at engine from the front of the car) opposite of the distributor - number one position on distributor is plug nearest to cylinder head (probably already marked) rotation is CCW.

May 10, 2011 | 1992 Toyota Corolla

1 Answer

Hi I am in afghanistan and i got a Kia with a toyota engine, they got me a new distributer cap but the numers are difrent from the first one it had on, i hade to change it the old one was broken, i put the...


First thing is to ck for a spark, see if she has good spark. Next remove the cap and watch the rotor button as it turns, have someone crank the engine to see, looking for which direction. Next turn the engine by hand looking for any marks on the crankshaft pully. aligning any marks should be #1 or #4 piston firing position. you will have to do this trial and error. Next if your rotor buton turns to the left align the marks on your pully and put your # 1 plug wire at the port in the cap which the rotor button is pointing at, then next put the #3 plug wire in,next #4 and last in turn would be #2. The firing order is 1,3,4,2.which ever direction the rotor button turns. if it starts and runs ruff you are out of phase 180 degs. move the wires two ports in the cap as the rotor turns. 

Nov 26, 2009 | 2003 Toyota Corolla

1 Answer

I have a 1991 Toyota Corolla. I have put new spark plugs, spark plug wires, rotor button, and distributor cap on it. I have also put a new battery in it and had the alternator tested. I can't get it to...


you need to determine if you have spark or not. if not, is the cam turning? does it sound normal whan turning over? take the oil filler cap off, and see if cam turns while someone is cranking engine. if not, the timing belt is broken. if you do have spark, then the engine isnt getting fuel. you may need a shop to get further into it.

Oct 12, 2009 | 1991 Toyota Corolla

1 Answer

SPARK GAP FOR 1990 TOYOTA COROLLA I bought NGK G-POWER PLATINUM SPARK PLUGS Looking everywhere - I checked all the panels under the hood and I don't have a car manual for my 1990 4 cyl 1.6 litre 4-door...


Do you happen to have a hacksaw blade? The thickness of the hacksaw blade is equal to the clearance of the
spark plug contacts. You can put the hacksaw blade flat
between the contacts, and make the necessary adjustment. Then, start your engine. Send in your e-mail
so we will know.

Oct 11, 2009 | Toyota Corolla Cars & Trucks

1 Answer

My toyota corolla cs does not want to start properly and its got a jurk can it be the points or the plugs


this could be caused by a number of reasons, most common are: dirty fuel or air filter, plugs, distributor cap, spark plugs, spark plug wires or a poor connection in one of the harness plugs, also be sure to inspect there are no wires touching the exhaust manifold, this could cause a live positive to ground out causing hard starting and jerking, it it also a possibility the fuel pump is on its way out. inspect these areas only if the above doesnt help. hope this helps.

Sep 30, 2009 | 1983 Toyota Corolla Deluxe

1 Answer

WHAT TO REMOVE TO LOCATE THE SPARK PLUGS ON A TOYOTA CORROLA VERS


well the 4 spark plug is located in front on the cylinder head,you have to take out the wire of the spark plug the you can see it,note; when you take out the cap from the spark plugs put a marking on the cap to make sure you dont put the wire for the 1st cylinder to the 3rd cylinder .....

Aug 23, 2009 | 2002 Toyota Corolla

1 Answer

Need spark plug wiring sequence, 1985 toyota corolla 1600 2 door hatchback, rear wheel drive


With the 2T-C, 3T-C, and 3K-C engines the Firing Order is 1-3-4-2
The distributor rotates ->Clockwise. (The rotor actually)

Number 1 spark plug tower on the distributor cap, faces directly towards the engine. Number 2 faces the back of the engine, Number 4 faces the front of the engine, Number 3 is to the outside away from the engine.

Number 1 spark plug is at the front of the engine. 1-2-3-4

With the 4A-C engine, and other A-Series, the Firing Order is 1-3-4-2
The distributor rotates ->CounterClockwise.

Number 1 spark plug tower is towards the engine, and faces the back of the engine. Number 3 spark plug tower is away from the engine, and faces the back of the engine.
Number 2 spark plug tower is towards the engine, and faces the front.
Number 3 spark plug tower is away from the engine, and faces the front.

Aug 16, 2009 | 1985 Toyota Corolla 2 Door

1 Answer

92 nissan wire patern


I have a 92 Nissan congrats they are awesome cars. Me and my friend changed the rotor and cap along with the spark plugs on mine. If you lost the wire pattern I would recommend going to auto store and looking it up in the nissan car manual.
Good Luck
Proteus

May 21, 2009 | 1992 Nissan Sentra 4 Door

3 Answers

92 Toyota pickup


you need to make sure all of the vaccum lines are on and the one behind the throttle body and also ask youself when was the last time the truck had a good tuneup like a fuel filter,spark plugs,wires and a new drive belt and pvc valve

Feb 08, 2009 | 1992 Toyota Pickup

Not finding what you are looking for?
1992 Toyota Corolla Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...