Question about Mitsubishi Cars & Trucks

Open Question

92 mitsubishi montero need torque for rocker arm forhead

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque specs 2003 olds silhouette rocker arm 3.400


Here is a suggested updated torque spec for this engine's rocker arm bolts;
Rocker arms
Step one: Torque to 11 ft lbs then tighten an additional 90 degrees of bolt head rotation. Some guys don't fuss with the torque specs and just get them good and tight. Either way, be careful, as the heads are aluminum. You do not want to over tighten these bolts

Oct 07, 2016 | 2003 Oldsmobile Silhouette

1 Answer

What are the rocker arm torque specs on a 1996 dodge caravan 3.0 liter


Hi Derrel,here's a link to a Autozone repair guide on your rocker arms,you can join their site like me for free and use all their repairs guides,need more help,let me know,k. Repair Guides Engine Mechanical Rocker Arm shafts AutoZone com

Aug 29, 2016 | 1996 Dodge Caravan

1 Answer

Rocker arm pivot torque for olds cutlass 1987 307


Oldsmobile Torque Specs - GbodyOlds.com

www.gbodyolds.com/forum/showthread.php?754-Oldsmobile-Torque...
Feb 7, 2013 - 2 posts - ‎2 authors Oldsmobile Small-Block Engines Cylinder Head Bolts (1/2in. bolt) 130 ft. lbs. Cylinder Head ... Rocker Arm Pivot Bolt 25 ft. lbs. Rod Bearing ...

Rocker Arms - AutoZone

www.autozone.com/...Cutlass...1987.../Rocker-Arms/_/P-0900...

AutoZoneGM Cutlass RWD 1970-1987 Repair Guide ... To remove the rocker arms from the shaft, the nylon arm retainers must be removed. ... 7: Engine valve system, 260, 307, 350, 403 Oldsmobile built engines ... Unfasten the two bolts that attach the rocker arm pivot to the cylinder head. ... Torque the retaining bolts to 25 ft. lbs.

Dec 01, 2015 | 1987 Oldsmobile Cutlass Salon

1 Answer

I have a 1996 Buick lesabre with the 3.8 liter v6 motor. I just did a top end gasket set and need to know how to adjust the rocker arms. Can anyone help? I know I need to start on compression stroke to...


zjlimited_2060.jpg

Fig. 7: Rocker arms and related components - 1991-99 VIN L engine and 1998-99 VIN 1 engine (click image for zoom)

  1. Clean the rocker arms and pedestal bolts in a suitable solution and inspect for wear. Make sure to clean all of the thread adhesive from the rocker arm pedestal bolts.

To install:
  1. If removed, install the pushrods and make sure they seat in the lifter.
On 1998-99 vehicles, the bolts rocker arm bolts are designed to permanently stretch when tightened. The correct part number fastener must be used to replace this type of fastener. Do NOT use a bolt which is stronger in this application. If the proper bolt is not used, the parts will not be tightened correctly, and part or system damage may occur.
  1. Apply a threadlocking compound to the bolt threads before reassembly.
  2. Install the pedestal and rocker arm assemblies, then tighten the retaining bolts as follows:
    1. 1988-92 vehicles: 28 ft. lbs. (18 Nm).
    2. 1991-98 vehicles: 19 ft. lbs. (29 Nm), plus an additional 90° with a torque angle meter.
    3. 1999-99 vehicles: 11 ft. lbs. (19 Nm), plus an additional 90° with a torque angle meter.

  3. Install the valve cover(s), as outlined earlier, then connect the negative battery cable.
  4. Start engine and check for fluid leaks and listen for valve train noise.
I hope this helps, and just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment.

Have a nice day and thanks for using FixYa.

Jose.

Oct 17, 2011 | 1996 Buick LeSabre

2 Answers

I have an 98 Montero sport that has a "ticking"


modern engines- rockers arms don't need to be readjusted- they have hydralic lifters- if ticking loudly- you might need to change oil- either it is starting to break down or milage is high enough on vehisle to step up one grade during warmer weather

May 27, 2011 | 1999 Mitsubishi Montero Sport

1 Answer

Mitsubishi Montero 2001 - 3.5 litre Rattle in the valve train rocker arms? Cary burchglass@hotmail.com


It could be one of the rockers are loose or you're not getting oil up there. Have it checked out quickly before the engine locks down if it's due to oil not being pumped correctly. A loose rocker is just as bad. Dumb question, But have you checked the oil level?

Dec 27, 2010 | 2001 Mitsubishi Montero

1 Answer

I replaced the lifters in my 2000 galant 2.4 L and i need to know what to torque the rocker arm shafts to.


1.5 and 1.8 engines:
* Install the rocker arm and shaft assemblies. Tighten the rocker arm shaft retainer bolts to 23 ft. lbs. (32 Nm).

* Check valve adjustment and install the valve cover. Tighten the valve cover bolts to 16 inch lbs. (1.8 Nm) for the 1.5L engine or to 29 inch lbs. (3.3 Nm) for the 1.8L engine.



2.0 engine
* Lubricate the rocker shaft with clean engine oil and install the rockers and springs in their proper places.

* Install the rocker shaft assemblies on the engine. Tighten the bolts gradually and evenly to 21-25 ft. lbs. (29-35 Nm).



2.4 engine

fa2bc50.jpg

Fig. Rocker arm shafts and components-2.4L engine



* Fit the rocker shaft springs from above and position them so that they are at right angles to the plug side. Install the rocker springs before installing the exhaust side rocker shaft and rocker arm assembly.

* Install the exhaust side rocker shaft assembly in the engine. Tighten the rocker shaft mounting bolts gradually and evenly to 23 ft. lbs. (32 Nm).
* Remove the lash adjuster retaining tools.
* Install the rocker cover and tighten the mounting bolts to 30 inch lbs. (3 Nm).

* Reinstall the spark plug wires to the spark plugs.



Hope helps.

Sep 06, 2010 | Mitsubishi Galant Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...