An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: 1998 Honda passport auto trans only has reverse,no...
Check engine light on ? Hooking up a scan tool and checking for DTC'S - diagnostic trouble codes would be the first thing to do ! And then using scan tool data list for transmission inputs to TCM/ECM ! If it were a electrical problem the check engine light would be on , most of the time . You can find free wiring diagrams at http://bbbind.com/free_tsb.html
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
After making sure trans is full on trans fluid and checks good next try cleaning out the electrical plug, BIG GREY PLUG with lots of wires on the top side of trans, passenger side right next to exhaust. Sometimes they get water in them and short them out causing them to not shift. Also check the fuses inside. Look for shift solenoid. There should at least be one or two. If fuses and plug all check out good it is possible that solenoids are bad. A bad sparg assembly could also cause problem Inside trans. Let me know what you find. If still no forward pull down in first gear and see if it move. If so trans will need to be removed.
you need to take it to a specific trans repair shop so they can diagnose it. i think your shift solenoids are starting to malfunction. if it helps you can try and replace the fluids and the trans filter that may help and or fix the problem
Are you sure you have all 4 forward gears? Most of the time a no reverse condition also means 1st and 3rd only.No 2nd or 4th.If you dont have all the forward gears as i suspect , the reaction shell is stripped or broken.If you do have all the forward gears then these are the two most common reasons you do not have reverse.1 reverse input clutches are damaged or burnt 2 forward cltches have slipped to the point they are welded together causing a mechanical bind in reverse and also causing the transmission to pull forward in neutral.Let me know if i can help.Good Luck.
I have a 1998 and I just confronted the same problem. It seems to take like 1 gear in reserve and like 2 gear in 1 gear. Any thoughts? I don't really it should be the transmission since it still works going forward in 2 different gears. Thanks.
CHECK THE TRANSMISSION FLUID TO SEE IF IT IS LOW. THERE SHOULD BE A COLD LEVEL AND A HOT LEVEL. WITH THE TRANS IN PARK AND HOT, ENGINE RUNNING PULL THE DIPSTICK TO SEE IF THE TRANS NEEDS FLUID. WHEN ADDING, MAKE SURE THE PROPER FLUID IS USED. IF THE TRANS FLUID LEVEL IS OK BUT THE TRANS FLUID SMELLS BURNED OR IS VERY DARK THEN HAVE THE TRANSMISSION SERVICED WITH FLUID AND FILTER. I HOPE THIS HELPS. THANKS FOR USING FIX-YA AND FOR ANY COMMENTS. BEST OF LUCK