Question about Volkswagen Eurovan

Open Question

My side mirror on my 2003 vw eurovan won't move and won't stay in keeps popping out. The top arm locks the mirror in place and can move up and down - the middle arm won't move the mirror side to side

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 840 Answers

SOURCE: Locks won't stay locked

Believe it or not there was a service bulletin Warranty on this erratic behavior on the door locks you need to call Volkswagon if you need anything else go to collisionrepairadvice.com

Posted on Mar 13, 2009

goalie39
  • 469 Answers

SOURCE: 2003 lincoln navigator running board

The door switches are built in the latches on each of the doors, they are pron to sticking, leaving the security module to beleive the door is open.
The simple fix is to spray a generous amount of WD40 on, in, and around the door latches, then opening and closing the door a few times. I would start with the passenger door as`this is likely the culprit. do the rest of the latches as a prevenitive measure.

Hope this is of some help.
Ed

Posted on Apr 20, 2009

SOURCE: Driver side mirror is loose and want stay in place, how do you tighten it?

You'll have to remove the door panel to access the screws which hold it on.

Posted on Apr 23, 2009

BCAS1298
  • 3092 Answers

SOURCE: My VW Eurovan,2002 has 2 fault codes. P0011 and

P0011 - Intake camshaft position timing ( over advance bank 1 )
O0420 - catalyst system efficiency below threshold bank 1. Hope this was helpful.

Posted on Dec 02, 2009

  • 1810 Answers

SOURCE: 2003 Chevy Tahoe. Driver's side power window

check releys and wires in door jam 1 might be broken failing that u need a new switch

Posted on Jan 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the front driver side power window switch on a 2008 Buick Enclave



Armrest Door Pull

Remove Rubber Cover

Remove 10mm *****
The first step is to pry out the plastic trim plate behind the chrome colored door release handle using a small flathead screwdriver.Then remove the 10mm ***** behind the plate using a ratcheting wrench with an extension bar attached.
Next pry out the rubber cover at the bottom of the door pull located in the center of the arm rest. Use a Torx T-25 (star bit) screwdriver to remove the two screws.
Remove Torx T25 Screws

2 T-25 Torx & 1 10mm *****

Pry Up Arm Rest Panel
Use a flathead screwdriver to pry up the rear of the plastic arm rest panel. There is a plastic hook at the front of the panel, so only pry it up from the rear edge.
Lift Rear End First

Plastic Hook At Front of Panel

Power Window Connector
After you lift out the arm rest panel, you'll need to disconnect the power connector for the window and door lock switches.
Push Connector Release Tab

Power Connector Unplugged

Two More T25 Screws
Push on the release tab with a flathead screwdriver and pull out the power window / door lock connector.Use a Torx T25 screwdriver to remove the two screws located below the arm rest panel.
Remove T25 Torx Screws

Outer Edge of Panel

Push In Center of Fastener
Then move to the outer edge of the door panel and locate the two small round fasteners. Use a small screwdriver to pop in the center pins of the two fasteners.
Pull Out Plastic Rivet

Black Plastic Fastener Removed

Remove Lower Fastener
Pull out the two plastic rivet fasteners and set them aside in a safe place.
Pull Panel Away From Door

White Plastic Pop Rivets

Pull Off Sail Panel
Grab the door pull in the arm rest and tug it towards yourself to disengage the pop rivet friction fasteners that hold the panel to the door frame.Move to the top corner of the door panel and pry off the triangular "sail" panel. On some vehicles, the sail panel contains the tweeter speaker.
Lift Panel Off Door Lock

Pull Out Door Pull Cable
Lift the door panel off the door lock button and tilt the top of it out towards yourself.Use a pair of needle nose pliers to gently lift the metal ball at the end of the door opener cable out of the mechanism.
Disconnect the door cable from the back side of the door panel.
Door Pull Cable Removed

Disconnect Power Mirror
Then disconnect the power connector for the side view mirror by lifting up on the release tab. Slide the power connector off the plastic anchor on the metal door frame.
Slide Connector Off Anchor

Unlock Connector

Connector Detached
Look behind the door panel and locate the large wire connector with the pink lever lock. Swing the lever open to unlock the connector and separate it from the socket.


Door Panel Removed

Power Window Motor

10mm Bolts
Now the door panel can be completely removed by lifting it up and off the door frame.To replace the power window motor, remove the 10mm bolts.
Stock OEM Door Speaker

Remove 7mm *****
The stock "OEM" speaker is held in place by a single 7 mm *****. Remove it with a socket and ratcheting wrench.
Pry Off OEM Speaker

Speaker Removed

Disconnect Power Plug
If the speaker is stuck to the door frame, gently pry it off with a small flathead screwdriver.Disconnect the speaker's power plug by pressing the release tab with the small flathead screwdriver.
Fits 5.25", 6.5", 6.75"

Re-installing Door Panel
According to the Crutchfield website, the 2008 to 2012 Chevrolet Malibu's front door speakers can be replaced withaftermarket speakers in the following sizes: 5 1/4", 6 1/2" or 6 3/4" speakers with the use of a bracket.If you'd like to reduce road noise, make your car quieter and also improve the sound from your speakers, I'd recommend applying some Dynamat Sound Deadener on to the metal door frame.
Re-Attach To Anchor

Plug In Power Side View Mirror

Re-Insert Power Connector
To re-install the door panel, first hold the panel close to the door frame before re-connecting the large wire plug. Swing the pink lever closed to lock it in place.Slide the socket for the power side view mirror back on to its anchor and insert the power plug.
Lock Power Connector

Pink Lever Locked

Re-Insert Door Pull Cable Ball
Insert the metal ball at the end of the door opener cable back in to the door handle mechanism.Slide the black plastic cone part of the cable back into the slot in the door opener assembly.
Door Opener Cable Reinstalled

Hang Door Panel On Frame
Gently lower the door panel down on to the edge of the door frame with the door lock switch through the opening at the top.
Line Up White Plastic Fasteners

Push On Sail Panel

Push Door Panel In Place
Move to the bottom of the door panel and line up the white plastic pop rivet fasteners with the holes in the metal door frame.Push all around the door panel to re-insert the pop rivet fasteners.
Re-attach the sail panel at the top corner of the door frame.
Push Panel Flush Against Frame

Insert Side Edge Fasteners

Insert Larger Piece First
Next move to the side edge of the door panel and first re-insert the larger piece of the two fasteners. Then insert the smaller "pin" piece of the fastener into the middle of the larger piece.
Insert Small "Pin" Piece

Install Lower Edge Fastener

Tighten 2 T25 Torx Screws

Re-Attach Power Connector

Insert Front Hook First
Insert and tighten the two Torx T-25 screws located under the arm rest.Re-attach the power connector to the plastic arm rest panel.
First insert the hook at the front of the arm rest panel and then snap the rear end in place.
Pop Arm Rest Panel In Place

Tighten 2 T25 Screws

Replace Rubber Cover
Insert and tighten the two T25 Torx screws into the door pull cup. Then replace the rubber cover over the two screws.
Tighten 10mm Door Handle *****

Replace Door Handle Trim Plate

Malibu Door Panel Replaced
Replace the 10mm ***** that goes above and behind the door opener handle and tighten it. Pop in the plastic trim plate behind the door handle.

Apr 10, 2016 | Buick Cars & Trucks

2 Answers

How do I take the door panel off of a 95 Ford F150 to replace the handle?


All there is is just screws around the outer sides of the door panel(3 on bottom). There is one located on the arm rest where the handle is. Then you need to take the screw out where you can lock your door and open your window ect... And just move the panel around until it comes off. You might have to pull the door opener out a little to get it through that hole.

Nov 02, 2010 | 1995 Ford F150 Styleside Regular Cab

1 Answer

How to take the drivers door panel off due to the


Roll down the window completely. There should be 2 screws to remove on the inside of the panel.I believe there is one just behind the inner door handle and I think one on the door panel arm rest. There may be one more so if you see it, remove all of them. Then grab the bottom of the the panel with both hands (palms up) and pry out with a couple of quick hard tugs and the panel clips should snap free. Do this to the bottom, both sides and the top by the mirror allowing the panel to hang. look behind the panel and disconnect the power door lock and the power window connections. To remove the panel completely, push up from the bottom and remove. Keep an eye on the panel clips because they sometimes like to lock back into place while you pop the others out and it can be frustrating unless you are aware of it. There should be 3 nuts holding the mirror on the door to remove that will free the mirror. Reverse the steps to reinstall the panel.

May 15, 2010 | 2003 GMC Sierra 1500

1 Answer

Check engine light keeps coming on in my volkswagen eurovan 2003


could be many many things. i used to work at a vw dealer so i'm going to guess it's iether the secondary air kombi valve, an 02 sensor, or a fuel trim issue. go to the dealer for a good diagnosis.

Mar 23, 2010 | 2003 Volkswagen Eurovan

1 Answer

How to change an indicator bulb on a vw crafter van on the nearside mirror


You have push top of large mirror is asif you were adjusting it to its highest position, then slide the mirror glass up and off, this in turn allows you access to the screws that hold the whole light unit in place which with the aid of some torx bits which are inside mirror casing you can remove. hope this makes sense.

Dec 05, 2009 | 2004 Volkswagen Eurovan

2 Answers

I need to reattach the rear view mirror to the windshield cannot remove the button from the mirror or disconnect the plug for mirror lights.


Just finished this job 5 mins ago. To disconnect the lights, use a small screwdriver to lift the locking tab on the plug. It's on the top of the plug. You should now be able to pull the plug from the socket. First check for locking screws on the housing. If there are none, take a scrap piece of 2x4 and place on edge. Place the pivot arm of the mirror on top edge of 2x4 with flat side of mounting plate facing down. Gently tap the plate out of the housing using a screwdriver and small hammer.

Jul 31, 2009 | 1998 GMC Sonoma

1 Answer

VW Sharan 2003 rear washer has stopped working


you need to take out the passenger side light you will b able to get to the connections there hope this is helpful .

Apr 04, 2009 | 2003 Volkswagen Eurovan

1 Answer

Locks won't stay locked


Believe it or not there was a service bulletin Warranty on this erratic behavior on the door locks you need to call Volkswagon if you need anything else go to collisionrepairadvice.com

Mar 13, 2009 | 2003 Volkswagen Eurovan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...