Question about 2011 Dodge Ram 3500

1 Answer

REPLACED FRONT DRIVESHAFT AND TRUCK WILL NOT GO INTO 4WD on a 2011 dodge 3500

TRANSFER CASE SELECTOR BECAME UNPLUGGED SO I PLUGGED IT BACK IN

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 76,673 Answers

Is the 4X4 actuator motor working when you select all wheel drive?

Posted on Dec 16, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

I put 2014 rims on my 2010. Tire pressure issues. screen on the dash is showing psi's blank. how do I reset? I assume these 2014 rims would have stock sensors in them, and there basically brand new.


Notice that the 2010 is listed, but not the 2014

Dodge

2014Challenger
2014Charger AWD 2014Charger RWD 2014Durango 2014Grand Caravan 2014Journey 2013Challenger 2013Charger AWD 2013Charger RWD 2013Durango 2013Grand Caravan 2013Journey 2012Challenger 2012Charger AWD 2012Charger RWD 2012Durango 2012Grand Caravan 2012Journey 2011Challenger 2011Charger 2011Durango 2011Grand Caravan 2011Journey 2011Ram 1500 Big Horn 2wd 2011Ram 1500 Big Horn 4wd 2011Ram 1500 Laramie 2wd 2011Ram 1500 Laramie 4wd 2011Ram 1500 Lone Star 2wd 2011Ram 1500 Lone Star 4wd 2011Ram 1500 SLT 2wd 2011Ram 1500 SLT 4wd 2011Ram 1500 ST 2wd 2011Ram 1500 ST 4wd 2011Ram 1500 Sport 2wd 2011Ram 1500 Sport 4wd 2011Ram 2500 Laramie 2wd 2011Ram 2500 Laramie 4wd 2011Ram 2500 SLT 2wd 2011Ram 2500 SLT 4wd 2011Ram 2500 ST 2wd 2011Ram 2500 ST 4wd 2011Ram 3500 Laramie 2wd 2011Ram 3500 Laramie 4wd 2011Ram 3500 SLT 2wd 2011Ram 3500 SLT 4wd 2011Ram 3500 ST 2wd 2011Ram 3500 ST 4wd 2010Challenger 2010Charger 2010Ram 1500 Laramie 4wd 2010Ram 1500 SLT 2wd 2010Ram 1500 SLT 4wd 2010Ram 1500 ST 2wd 2010Ram 1500 ST 4wd 2010Ram 1500 Sport 2wd 2010Ram 1500 Sport 4wd 2010Ram 1500 TRX 2wd 2010Ram 1500 TRX4-Off Road 4wd 2010Ram 2500 Laramie 2wd 2010Ram 2500 Laramie 4wd 2010Ram 2500 Power Wagon 4wd 2010Ram 2500 SLT 2wd 2010Ram 2500 SLT 4wd 2010Ram 2500 ST 2wd 2010Ram 2500 ST 4wd 2010Ram 3500 Laramie 2wd 2010Ram 3500 Laramie 4wd 2010Ram 3500 SLT 2wd 2010Ram 3500 SLT 4wd 2010Ram 3500 ST 2wd 2010Ram 3500 ST 4wd

Dodge

2014Challenger
2014Charger AWD 2014Charger RWD 2014Durango 2014Grand Caravan 2014Journey 2013Challenger 2013Charger AWD 2013Charger RWD 2013Durango 2013Grand Caravan 2013Journey 2012Challenger 2012Charger AWD 2012Charger RWD 2012Durango 2012Grand Caravan 2012Journey 2011Challenger 2011Charger 2011Durango 2011Grand Caravan 2011Journey 2011Ram 1500 Big Horn 2wd 2011Ram 1500 Big Horn 4wd 2011Ram 1500 Laramie 2wd 2011Ram 1500 Laramie 4wd 2011Ram 1500 Lone Star 2wd 2011Ram 1500 Lone Star 4wd 2011Ram 1500 SLT 2wd 2011Ram 1500 SLT 4wd 2011Ram 1500 ST 2wd 2011Ram 1500 ST 4wd 2011Ram 1500 Sport 2wd 2011Ram 1500 Sport 4wd 2011Ram 2500 Laramie 2wd 2011Ram 2500 Laramie 4wd 2011Ram 2500 SLT 2wd 2011Ram 2500 SLT 4wd 2011Ram 2500 ST 2wd 2011Ram 2500 ST 4wd 2011Ram 3500 Laramie 2wd 2011Ram 3500 Laramie 4wd 2011Ram 3500 SLT 2wd 2011Ram 3500 SLT 4wd 2011Ram 3500 ST 2wd 2011Ram 3500 ST 4wd 2010Challenger 2010Charger 2010Ram 1500 Laramie 4wd 2010Ram 1500 SLT 2wd 2010Ram 1500 SLT 4wd 2010Ram 1500 ST 2wd 2010Ram 1500 ST 4wd 2010Ram 1500 Sport 2wd 2010Ram 1500 Sport 4wd 2010Ram 1500 TRX 2wd 2010Ram 1500 TRX4-Off Road 4wd 2010Ram 2500 Laramie 2wd 2010Ram 2500 Laramie 4wd 2010Ram 2500 Power Wagon 4wd 2010Ram 2500 SLT 2wd 2010Ram 2500 SLT 4wd 2010Ram 2500 ST 2wd 2010Ram 2500 ST 4wd 2010Ram 3500 Laramie 2wd 2010Ram 3500 Laramie 4wd 2010Ram 3500 SLT 2wd 2010Ram 3500 SLT 4wd 2010Ram 3500 ST 2wd 2010Ram 3500 ST 4wd

How To Reset Your Tire Light - YouTube

2q==? 0:41 https://www.youtube.com/watch?v=r1GP2_qzizE
  1. Similar
Mar 1, 2011 - Uploaded by Garden City Jeep Chrysler Dodge Ram SRT Garden City Jeep Chrysler Dodge Ram SRT ... Tire Air Pressure Sensor - What is It - TPMS Warning Light ...

2011 Ram 1500/2500/3500 Tire Pressure Monitoring System - YouTube

2q==? 3:49 https://www.youtube.com/watch?v=cDxde0PKgfY
  1. Similar
May 9, 2011 - Uploaded by Ram Trucks Outlining the tire pressure symbol and maintenance tips.

How to Turn off the TPMS light - Dodge Owner Forums

www.dodgeownerforums.com > ... > Dodge Trucks > 3rd Gen Rams
  1. Cached
  2. Similar
Jul 2, 2010 - 15 posts - ‎9 authors My brother just got a 2008 1500 and the TPMS light is on. The dealer ... Does any one know how to reset the TPMS so that the light will turn off? Logged .... Quote from: dragonslayer169 on July 03, 2010, 08:14:37 am. Awesome ..... I have having a TPS issue on the new Ram that is ticking me off. I plan to try ...

TPMS Relearn / Reset procedures - TPMSDirect Takes the Headache ...

www.tpmsdirect.com/TPMS_Reset_Procedure_Chrysler_Dodge...Ram.../707.htm
  1. Cached
  2. Similar
TPMS Programming instructions for Chrysler, Dodge, Jeep, Fiat, Ram, and ... Schrader 20398 TPMS Relearn / Reset Procedure for Chrysler, Dodge, Fiat, Jeep, ... 2010 300 Touring. 2010 300C. Dodge 2014 Challenger. 2014 Charger AWD.

Reset low tire pressure warning? - DODGE RAM FORUM - Dodge Truck ...

www.ramforum.com > ... > 4th Gen : 2009 - Present > Exterior
  1. Cached
  2. Similar
Dec 11, 2013 - 10 posts - ‎3 authors So my low tire pressure warning goes off because it says the right front tire is low. ... It should reset, it may take a cycle or two but unless you need a new sensor it should be ok. ... It was automatic on my truck and it's a 2010.
put-2014-rims-2010-tire-pressure-atpwuitlrih2mybimxbaxrao-4-0.jpg


May 23, 2016 | Dodge Ram 1500 Cars & Trucks

1 Answer

4 wheel will not work. the selector switch will show it is in but front tires will not engage No messages on control center


Search Results

    4WD Transfer Case Position Sensor/Selector ... - RepairPal

    repairpal.com > Problems > Chevrolet > Tahoe
    Service 4WD Message May be Displayed on Chevrolet Tahoe. The 4WD transfer .... I had a similar problem with 4 wheel drive selector switch. When I select 4 ...

    4WD Transfer Case Position Sensor/Selector ... - RepairPal

    repairpal.com > Problems > Chevrolet > Suburban 1500
    Service 4WD Message May be Displayed on Chevrolet Suburban 1500 ... When in 4 wheel , it will not in engage sometimes and message comes on to service 4 wheeldrive. ... I replaced the 4wd transfer switch in 2007 and now again it is not working, this would be the ... 2008 Chevrolet Suburban 1500- 4WD156,000Visitor.

    Chevrolet Tahoe Repair: Problems, Cost and Maintenance

    repairpal.com > Cars > Chevrolet
    Having problems with your Chevrolet Tahoe? Learn about common Chevrolet Tahoe problems, recalls and typical maintenance and repair costs. ... ABS Front WheelSpeed Sensors May Fail. Chevrolet Tahoe ... 2008 Chevrolet Tahoe.

Jan 21, 2016 | 2008 Chevrolet Tahoe LTZ

1 Answer

Why won't 4 wheel drive engage?


4WD Transfer Case Position Sensor/Selector Switch May ...

repairpal.com > Problems > GMC > Sierra 1500
you can hear the transfer case kickin in, but the front wont lock in. replace the actuator and ... service 4wd indicator came on after trouble trying to engage 4wd.

Aug 11, 2015 | Cars & Trucks

2 Answers

96 ford exsplorer 4wd blinking lights


If after driving a little bit the 4wd light starts blinking then I believe one (or both) of your HALL sensors are bad or have picked up some metal filings.

I believe the light is blinking because your GEM computer doesn't think both driveshafts are going the same speed.

I think one of your HALL sensors is fooling the GEM into thinking one of the driveshafts is stopped all the time

When you are stopped the computer thinks everything is OK (because the other driveshaft is stopped also)

When you are moving the GEM tries to get both driveshaft spinning the same speed but the sensor isn't responding

It takes 5 minutes to change the rear sensor (you have to cut the old one off and splice in the new one. Sealing the splice with liquid electrical tape)

The front sensor is hardr becasue you have to remove the shift motor on the transfer case

also for the 4wd system there is a TOD(torque on demand relay) that might be bad

Jan 22, 2015 | 1996 Ford Explorer

2 Answers

02 blazer will not change 4wd modes


The most common problem with these would be the transfer case 4x4 actuator motor or also called transfer case selector motor, testing would be a good thing to do before replacing it.

Dec 25, 2012 | 2002 Chevrolet Blazer

3 Answers

Need to know steps involved to disconnect transfer case from transmission so that I can still drive my Yukon


best bet is junkyard replacement. worst case. remove tc and get a longer driveshaft to the rear end

Jun 29, 2017 | 2001 GMC Yukon

1 Answer

Transfer case removal


Suzuki Samurai/Sidekick/Tracker 1986-1998 Repair Guide
Transfer Case Assembly - REMOVAL & INSTALLATION

Samurai Models
Even the 2WD Samurai uses a transfer case. Rather than use a straight line driveshaft from the transmission to the differential, the Samurai leaves the transfer case in place and replaces its internal working with a simple offset gear mechanism, thus keeping 2 of the 3 driveshafts used in the 4WD vehicle.
  1. On 4WD vehicles, remove the transfer case shift lever.
  2. Raise and support the vehicle safely.
  3. Drain the oil from the transfer case.
  4. Matchmark and remove the driveshafts from the transfer case assembly. Not all of the driveshafts need to be completely removed from the vehicle, just unbolted from the case flanges. In most cases, the shaft or shafts on one side of the transfer case can be repositioned and supported out of the way.
  5. Support the transfer case using a suitable transmission jack.
  6. Disconnect the speedometer cable from the transfer case.
  7. On 4WD vehicles, disconnect the 4WD switch lead wire at the coupler.
  8. Remove the three mounting bolts and/or nuts securing the transfer case to the chassis, as applicable.
  9. Carefully lower the transfer case from the vehicle.
To install:
  1. Position and install the transfer case. Tighten the mounting bolts to 159-248 inch lbs. (18-28 Nm) and/or the mounting nuts to 19-25 ft. lbs. (25-34 Nm).
  2. On 4WD vehicles, connect the 4WD switch lead wire at the coupler.
  3. Connect the speedometer cable to the transfer case.
  4. Properly refill the transfer case with an approved type of gear oil.
  5. Align and install the driveshafts to the transfer case.
  6. On 4WD vehicles, install the transfer case shift lever.
  7. Remove the jackstands and carefully lower the vehicle.
Sidekick, Tracker, Sidekick Sport and X-90 Models
On these models the transfer case is bolted to the transmission and takes the place of the 2WD transmission's extension housing. Therefore, transfer case is removed or installed as part of the transmission assembly.

Hope this help (remember rated this and comment).

Mar 21, 2010 | 1993 Geo Tracker

1 Answer

97 Silverado K1500 350 VTEC 5.7 Stuck in 4 Wheel Drive


If it has the push button 4wd selector on the dash, it is most likely the transfer case encoder motor. Not to bad to replace but you will have to remove the front driveshaft.

Aug 19, 2009 | 1999 Chevrolet Silverado 1500

2 Answers

Transfer case wont engage


shift into 4wd and move truck a couple of feet.
if light is still off, park truck block the wheels set the park brake jack right front wheel and try to hand spin the wheel if wheel doesn't turn 4x4 is functioning properly but there is a wiring problem use an ohmmeter to check the 4x4 switch wiring fuse and bulb
if wheel turns freely the front axle or transfer case is not engaged
attempt to hand spin the front driveshft if the driveshaft will spin the transfer case is not engaged check the transfer case shift linkage, problem is in linkage or transfer case internals
if the driveshaft will not spin the transfer case is engaged properly
with trnsmission in neutral or park start engine measure vacuum on the two vac lines at front axle shift motor . one line should have approx 20" vacuum. other line should have none
if no vacuum measured look for vac leak or bad vac switch
if both lines have vac look for a bad vac swithc or ruptured cad actuator diaphragm
if one line has 20" +- VAC
move transfer case lever to 2wd measure vac again lines should have swapped vac signals
if no vac switch bad or 4wd shift likage needs adjusting
if yes vac motor bad or stuck or shift fork stuck
remove vac shift motor from the axle attach vac lines to shift motor engage disengage 4wd
does shift motor plunger move at least 1/2 inch
no shift motor bad
yes check axle shift fork and vac motor for binging

Jan 27, 2009 | 1999 Dodge Ram

Not finding what you are looking for?
2011 Dodge Ram 3500 Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...