Question about Chevrolet Impala

1 Answer

MY Impala only has two bolts in back of floor rail, two in front have no bolt heads. Do they bolt in from underside of car?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

If ypu are talking about seat mounting, on bucket seats they only have two remove these move seat all the way back then tip seat forward to unhook front remove seat.

Posted on Jan 03, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Engine Bolt Torques- 2005 Chevy Impala/3400 Engine

Head Bolts
Step one 37 ft lbs then tignten 120 degrees more

Rocker arms
Step one 11 ft lbs then tighten 90 degresss more

Upper intake
89 inch lbs
Lower intake
132 inch lbs

Posted on Dec 02, 2008

  • 840 Answers

SOURCE: Kia rio front seat removal

14 or 15mm

Posted on Jan 25, 2009

SOURCE: Can't secure the front cross rail forward for bike rack

dear friend-the roof rack on a sante fe can not be moved.should you attempt that you will have constant rattles on your roof.i can surgest.that you modify your bike rack.

Posted on Jul 20, 2009

  • 5 Answers

SOURCE: Head bolt torque specs?

I really really really hope you turned the bolts an additional 90 degrees after torquing to 22 Ft-lbs. Otherwise, you may be taking that head off again.

Best of luck,

David

Posted on Mar 15, 2010

  • 1751 Answers

SOURCE: looking for head bolt troque spec for 3.4l impala

Please don't forget to rate. Thank you:

Left side front cylinder head


98e175a.gif
Cylinder head bolt torque sequence-3.4L engine

  • Cylinder head by aligning it with the dowel pins
  • New cylinder head bolts coated with a sealant (such as GM 1052080). Torque the bolts in the proper sequence (1-8) to 37 ft. lbs. (50 Nm). Using a torque angle meter turn the bolts 90 degrees in the proper sequence.
  • Left side exhaust manifold. Torque the bolts to 12 ft. lbs. (16 Nm).
  • Spark plugs. Torque the plugs 11 ft. lbs. (15 Nm).


  • Right side rear cylinder head:


    71cd5b7.gif
    Cylinder head bolt torque sequence-3.4L engine


  • New cylinder head gasket
  • Cylinder head on top of the gasket and make certain it is lined up properly with the dowel pins
  • New cylinder head bolts coated with a sealant (such as GM 1052080). Torque the bolts in the proper sequence (1-8) to 37 ft. lbs. (50 Nm). Using a torque angle meter turn the bolts 90 degrees in the proper sequence.
  • Right side exhaust manifold. Torque the bolts to 12 ft. lbs. (16 Nm).
  • Spark plugs. Torque the plugs 11 ft. lbs. (15 Nm).
  • Spark plug wires
  • Exhaust crossover pipe. Torque the fastener to 18 ft. lbs. (25 Nm).
  • Valve rocker arms and pushrods. Torque the fastener to 89 inch lbs. (10 Nm). Using a torque angle meter torque the fastener an additional 30 degrees.
  • Lower intake manifold. Torque the bolts to 115 inch lbs. (13 Nm).
  • Upper intake manifold. Torque the bolts to 18 ft. lbs. (25 Nm).
  • Posted on Nov 26, 2010

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    My driver seat seems to be coming unhooked from the floor on side next to console. I'm scare it will become unsecure while driving. How can i fix it?


    The rails it runs on are bolted to the floor pan. You can tighten those bolts. Run the seat all the way forward, and you should be able to see the rear bolts from the back seat.
    Run the seat all the way back, and you should be able to get to the front bolts.
    If they're stripped out, you may have a rust problem.

    May 31, 2015 | Seat Cars & Trucks

    1 Answer

    How many motor mounts does a 2006 chevy impala have?


    There are going to be five. There are two that can be seen from the engine bay that are side mounts near the front of the engine. Underneath you will find one, referred to as the anchor, centered over a crossmember. The remaining two are just behind this mounted to the frame rails. If you are thinking about replacing them, I suggest doing this first from the top, then side to side on the underside. First loosen retaining bolts on all five, support engine with a jack and remove then replace each front mount in turn, leaving retaining bolts snug but loose enough for there to be a little play as you may have to wiggle things around a little on the lower three. Underneath remove and replace first one outer, leaving the retaining bolt out of this one, then the anchor, you will have to work the jack around and probably wiggle some things in order to get out the old one, then to seat the new one. Replace retaining bolt in first frame mount then work the other side. Tighten to spec starting with anchor, then frame mounts then upper side mounts.

    Apr 14, 2015 | 2006 Chevrolet Impala

    1 Answer

    Remove front seat 1999 regal ls


    Find the rails that are bolted to the floorboard of your car. There are six or eight bolts holding the seat rails to floor. Seat removes with the rails when unbolted.

    Jan 16, 2015 | Seat Cars & Trucks

    1 Answer

    How to removea front seat 2009 chev impala


    you will find bolts under seat that go into a track and bolt into floor. remove the bolts and the seat will come out

    May 06, 2014 | 2008 Chevrolet Impala

    1 Answer

    1999 Chevy 1500 with power seats rocks forward or backward on breaking and acceleration.


    You said "rocks forward and backwards not sliding.
    upon that knowledge I would check the seat rails and see if they are still connected to floor of your truck. Sound as either the rail has disconnected at front or rear mount.
    A simple fix is to replace bolt with new and installing an oversize washer or plate to underside of truck when installing replacement bolt

    May 14, 2011 | 1999 Chevrolet Silverado 1500

    1 Answer

    How do I remove the power drivers seat in a 2003 Windstar. The support frame is broken and it needs to be replaced.


    on the seat rail on either side of the seat on the floor itself there are 4 bolts,2 bolts on each of the front rails(1each) and 2 on the back of the seat rails.remove these bolts and disconnect all connectors for the power seat and remove the seat assembly.

    Mar 15, 2011 | 1998 Ford Windstar

    1 Answer

    Can remove the front passenger seat of a 2003 Honda Odyssey? How?


    Your seat is bolted down. slide the seat all the way back as far as it will go, and look at the slide rails( tracks that the seat travels on), you will see 2 bolts. going into the floor on the rails. just undo the 2 bolts, and then slide the seat forward(slowly, the front has no bolts holding it), on the back side of the rails, are 2 more bolts. Remove thise bolts, and you should be able to remove the seat. (This is a manual seat, not a power seat) hope this helps, please rate helpful or not

    Jan 29, 2011 | 2006 Honda Odyssey

    2 Answers

    Where do I locate the starter on a 2000 V-6 Chevy Impala


    try and follow your positive cable from the battery it leads to the starter gm usually puts them on the front underside of car

    Jan 16, 2010 | 2000 Chevrolet Impala

    1 Answer

    I want to remove the front seats of my Expedition.


    four bolts and they are out and diconect the wires some of them un bolt from the bottom but most have little plastic covers on the rail covering up the bolts in the car two in front on the floor and 2 in back

    Oct 06, 2009 | 2000 Ford Expedition

    1 Answer

    Driver's Seat Removal


    There are four bolts holding the seat to the floor. Slide the seat all the way forward and you will be able to see the two bolts which are at the rear of the seat slide rail. They are 14mm bolts, remove them. Slide the seat all the way back and remove the two bolts at the front of the rail. Once the bolts are out removed tilt the seat towards the back, it should lift the seat bottom easily and you can find your flash drive. Be careful not to push the seat too far back as there may be a wiring harness to damage. Once you retrieve the flash drive, put the seat back down and put the bolts back in.

    Jul 13, 2008 | 2007 Nissan Altima 3.5 Sedan

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    22 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    75197 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7782 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...