Question about Chevrolet Captiva

Open Question

How to replace front arc plastic moulding on chev captiva

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
aloha27
  • 693 Answers

SOURCE: They throw petrol instead of diesel in my chev captiva now it won't start,its chev captiva

You're in big trouble here.
At the very least, the tank will have to be drained and the fuel lines flushed and bled. At worst your injectors have been burnt and require replacement, not to mention a complete engine overhaul.
I strongly suggest you contact a lawyer. This could very well be a more expensive repair than the vehicle is worth.

Sorry I couldn't have brought you better news.

Posted on Apr 17, 2015

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chev captiva 2015 wiring diagram as vehicle has burnt out wiring


geee
2015 ....to new for a burn out thats bad luck

Chevrolet Captiva Wiring Diagram

hardwick.io/doc/chevrolet-captiva-wiring-diagram.pdf


if not an insurance claim

best solution for a burn out fix like that is
source a full car loom from a wrecker
and fitting that in




26340248-ck52p2o2klengxcuf105rj3q-1-0.jpg

Nov 04, 2016 | Cars & Trucks

1 Answer

My chev captiva 2.4 petrol, it start nicely but it dsnt want to rev high, it shows code c3fa9


if it will not rev high , it could be in the limp mode or the rev limiter has failed
find what the code refers to and fix the fault

Oct 22, 2015 | 2010 Chevrolet Captiva 2.4

1 Answer

They throw petrol instead of diesel in my chev captiva now it won't start,its chev captiva


You're in big trouble here.
At the very least, the tank will have to be drained and the fuel lines flushed and bled. At worst your injectors have been burnt and require replacement, not to mention a complete engine overhaul.
I strongly suggest you contact a lawyer. This could very well be a more expensive repair than the vehicle is worth.

Sorry I couldn't have brought you better news.

Apr 17, 2015 | Chevrolet Captiva Cars & Trucks

1 Answer

Where is horn in peugeot 1.6 h.d.i


Remove the inner wheel arch plastic moulding on the right hand front wheel enough to find it on a bracket behind the front panel

Nov 03, 2014 | Cars & Trucks

1 Answer

Rear window hinge replacement


those moulding are just held by plastic clips you have to yank it out. in proper order in relation to the other mouldings of course

Aug 11, 2013 | 2005 Hyundai Tucson

1 Answer

Where can I find a Bonnet / Hood front edge moulding for a 2002 Mazda Tribute


its an 02 look in a boneyard or look online auto stores for aftermarket trim

Jul 12, 2017 | 2002 Mazda Tribute

1 Answer

How i remove this trim. marceedes ml


very carefulluy, the trin has a putty like rubber glue and you have to push a plastic object behind and lift this off stay directly behind the moulding and you might have plastic clips that will break off these you can replacetake your time, you might also have to replace the moulding incase it bends, this you have no choice with, bends -replace it..

Oct 02, 2012 | Cars & Trucks

1 Answer

Rear windscreen wash not working on Skoda Octavia


Remove cover from rear wiper arm (it is covering the wiper arm nut) gently ease off the plastic moulding in the middle of the nut try squirters if water is coming out unblock the water jet holes in the plastic moulding

Jun 29, 2012 | Skoda Octavia Cars & Trucks

1 Answer

How do I replace the rear window panel ( Drivers side, behind the rear door ) Chev Blazer 2000 LS 4 Door


should be a couple of screws and maybe bolts behind door trim and inside body mouldings

Sep 02, 2010 | 2000 Chevrolet Blazer

1 Answer

Cabin air filter


it;s under the cowl vent panel.

Cowl Top Vent Panel Removal
  1. Remove the windshield wiper pivot arm (17526) . Refer to Section 01-16 for the removal procedure.
  1. Remove the front door weatherstrip (20530) to access the windshield outside side moulding screws.
b981661.gif
  1. Remove the five windshield outside side moulding screws and the windshield outside side moulding (03136) .





  1. Pull the windshield outside moulding (03144) from the windshield glass (03100) .
  1. Remove the three Phillips-head screws from the cowl top vent panel (022A68) .


9bc8ed6.gif

  1. Remove the three plastic screws by turning them 90 degrees to unlock.





  1. Remove the six pushpins from the front edge of the cowl top vent panel .
  1. Lift up on the cowl top vent panel and disconnect the windshield washer hose (17A605) at the Y-connector.





  1. Remove the cowl top vent panel .

Mar 15, 2009 | 1998 Mercury Villager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...