Question about 2005 Chevrolet Malibu

Open Question

Diagram on the 05 Malibu to replace spark plug wires

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i change the spark plugs in a 2003 chevy malibu?


On this model it has a 3.1 liter v-6 the coil pack is near the firewall and coil pairing (firing order) 1-4,2-5,3-6 the front cylinders are the easy to replace that 2,4,6 and the rears are 1,3,5 starting from the fan belt . suggest using your phone to take several pictures so you do not get the wires mixed up. most of the wires have a metal housing surrounding the plug boot this is to be installed on the new wires. as engines heat up and cool down this wires are like welded to the spark plug. so pulling and twisting the ends is normal (of coarse swearing is involved also) After replacing the spark plugs remember to put a silicone grease inside the spark plug boot for easier removal next time you decide to change the spark plugs

Jul 23, 2014 | 2003 Chevrolet Malibu

1 Answer

Spark plug wiring diagram for 05 tahoe


Greg Bernett 2821 Solutions February 14, 2010
You didn't post your engine size so please pick the applicable diagram:


37926a4.gif
1996-98 4.3L Engines Firing Order: 1-6-5-4-3-2Distributor Rotation: Clockwise


8c292b0.gif
1996-98 5.0L, 5.7L and 7.4L Engines Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Clockwise



30ced3d.gif
4.3L Engines Firing order: 1-6-5-4-3-2 Distributor rotation: Clockwise


de67664.gif
4.8L, 5.3L and 6.0L Engines Firing order: 1-8-7-2-6-5-4-3 Distributorless ignition system (one coil on each cylinder)


bf80c63.gif
5.0L, 5.7L and 7.4L Engines Firing order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise

Source: spark plug wiring diagram for 98 tahoe

  • avatar15.jpg
    ledsled378 2926 Solutions July 24, 2010

ebe6e34.jpg
01f93b7.jpg ..............................

Source: Need diagram for spark plug wiring for 1997 Chevy

Testimonial: "Thank you for your prompt response. Saved my husband from some distress!"
Was this solution helpful? Yes No

  • avatar1.jpg
    Dennis Weid. 44272 Solutions September 16, 2008

This was all I could come with, hope it helps.



ebead53.gif

Feb 27, 2013 | 1998 Chevrolet Tahoe

1 Answer

Engine wiring diagram 2000 malibu


plug it all in were it was chief

Jun 06, 2012 | 2000 Chevrolet Malibu

2 Answers

Where on spark plugs and wires on 99 - 4 cyl. Malibu w/ overhead cams


pull the cover that has the 4 bolts in it on top of the engine. that is the coil/ignition module housing. the plugs are under it along with plug boots that you may want to replace.

Jul 25, 2011 | 1999 Chevrolet Malibu

1 Answer

Need to know the placement spark plug wires 2001 chevrolet malibu


do not have a diagram, but heres the firing order. 1-2-3-4-5-6, 1-3-5 is in back, # 1 is closest to alternator. from left to right, or facing engine from front 2-4-6 is in front. 5-2-3-6-4-1 is coil pack, from left to right (facing from front of engine).

Jul 30, 2010 | 2001 Chevrolet Malibu

1 Answer

How do I change the spark plugs?


Engine off
Remove one spark plug wire / using correct size spark plug wrench with / rubber boot designed for spark plugs (deep well socket with rubber boot) remove (1) spark plug / gap new replacement spark plug to specs / install replacement spark plug by hand into head of engine /finger tight /using spark plug socket and rachet finish tighting spark plug / tighten just beyond snug being careful to not over tighten and breaking spark plug ..if in doubt about the proper tighting consult motor manual for torque specs. use torque specs in conjunction with appropiate torque wrench . Re-install removed spark plug wire ...proceed to remaining spark plugs doing one at a time until completed.

Jan 09, 2010 | 2004 Chevrolet Malibu

1 Answer

I need the diagram to put the spark plug cables


2003 Chevrolet Malibu 3.1L SFI OHV 6cyl
Spark Plug Wires - Removal & Installation

3.5L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
    NOTE Twist the spark plug boot one-half turn in order to release the boot. Pull on the spark plug boot only. Do not pull on the spark plug wire or the wire could be damaged.
  2. Remove the intake manifold cover, if required.
  3. Disconnect the left side spark plug wires from the spark plugs.
  4. Disconnect the left side spark plug wires from the ignition coil.
  5. Remove the spark plug wire clips from the Manifold Absolute Pressure (MAP) sensor bracket and the heater inlet and outlet pipe tab.
  6. Remove the spark plug wire assembly.
  7. If replacing only one plug wire, open the retaining clips and remove the appropriate spark plug wire.
  8. Disconnect the right side spark plug wires from the spark plugs.
  9. Disconnect the right side spark plugs from the ignition coils.
  10. Remove the spark plug wire assembly.
  11. If replacing only one plug wire, open the retaining clip and remove the appropriate spark plug wire.
To install:
  1. Install the spark plug wire assembly.
  2. Connect the right side spark plugs to the ignition coils.
  3. Connect the right side spark plug wires to the spark plugs.
  4. If replacing only one plug wire, open the retaining clip and install the appropriate spark plug wire.
  5. Install the spark plug wire assembly.
  6. Connect the left side spark plug wires to the spark plugs.
  7. Connect the left side spark plug wires to the ignition coil.
  8. Install the spark plug wire clips to the MAP sensor bracket and the heater inlet and outlet pipe tab.
  9. If replacing only one plug wire, open the retaining clips and install the appropriate spark plug wire.
  10. Install the intake manifold cover, if required.

Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system
74d742b.jpg


Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
306b531.jpg


Fig. 3.5L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
9313fa7.jpg


Fig. 2.4L Engine Firing order: 1-3-4-2 Distributorless ignition system
2c9af72.jpg


Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
d929c16.jpg


Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system
f357cd3.jpg

Fig. 3.5L & 3.9L Engines Firing order: 1-2-3-4-5-6 Distributorless ignition system
09e9db9.jpg

I really hope help you with this (remember rated this help) Good luck.

Sep 23, 2009 | 2003 Chevrolet Malibu

1 Answer

2000 Chevy Malibu Hesitaiton when gas get s less than 1/4 tank


I would say do a tune up like spark plugs and spark plug wires.

Sep 10, 2009 | 2000 Chevrolet Malibu

1 Answer

I need to replace the spark plugs in my 2001 chevy malibu


You can get the plugs, make sure you have the correct socket and extension, most plugs come pre gapped (you shoud check, Then proceed one at a time to keep wires from getting mixed up.

Mar 14, 2009 | 2001 Chevrolet Malibu

Not finding what you are looking for?
2005 Chevrolet Malibu Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...