Question about 1998 Nissan Maxima

Open Question

How can i check the rear crank sensor on a 98 maxima

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1857 Answers

SOURCE: 98 Nissan Maxima - Check Engine Light, Knock Sensor

If the car is pinging you will set a knock sensor code.'
This comes from bad gas and running lean., You really need this professionally inspected to rule out the basics. I have seen alot of nissans with the knock sensor code stored but the light is still off.
Fill up the tank with high octane chevron and some techron injector cleaner and clear the light. If it stays off for a couple days then go get it inspected. Even if the code is stored it will still pass as long as the light is still off and the monitors have run.

Posted on Jan 04, 2010

johnjohn2
  • 5763 Answers

SOURCE: i have a 98 maxima

what are the codes that are coming up now?

Posted on Nov 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How crank sensor work on 2002 nissan maxima


A crankshaft position sensor or a camshaft position sensor can both cause a no fire condition. Both of these sensors are magnetic sensors that communicate with each other and pass that information on to the computer, letting it know that the motor is in correct time. Of either of these sensors go out, the computer doesn't know if the motor is in time, and can keep the engine from firing.

If you just replaced the rear main seal, double check to make sure that both sensors got reconnected (if you had to disconnect them)first thing. After that, you might look into testing them. I'm sure you can do an ohms resistance test, but also make sure you're getting voltage from the connector while trying to crank the motor. Ican tell you from experience that those cars have issues with their camshaft position sensors. Good luck!

Jun 23, 2014 | 2001 Nissan Maxima

1 Answer

No spark nostart on 1997 maxima with 1998 tranny


did you replace the knock sensor from the old one to the replacement one. ? double check the sensors are the correct ones fitted to your original engine are on the new replacement, also check the connection plugs, sometimes these cannot connect fully if have become weak.

Jul 30, 2017 | 1997 Nissan Maxima

1 Answer

98 Nissan Maxima - Check Engine Light, Knock Sensor


If the car is pinging you will set a knock sensor code.'
This comes from bad gas and running lean., You really need this professionally inspected to rule out the basics. I have seen alot of nissans with the knock sensor code stored but the light is still off.
Fill up the tank with high octane chevron and some techron injector cleaner and clear the light. If it stays off for a couple days then go get it inspected. Even if the code is stored it will still pass as long as the light is still off and the monitors have run.

Jan 04, 2010 | 1998 Nissan Maxima

1 Answer

I have 1998 Maxima, won't crank or start. Battery was replaced. Where is starter located or any other option?


Check crank sensors first.There are two sensors 1 is by the crankshaft pully (by the drive belts) the other is between the engine and transmission it reads from the flywheel . Good luck.

Nov 08, 2009 | 1998 Nissan Maxima

3 Answers

Knock sensor 1996 v6 3.3 nissan pathfinder


The Crankshaft Position Sensor is located: Under hood, driver side, front engine area, mounted rear of crankshaft pulley
The Knock Sensor is located: Under hood, center, front engine area, below intake manifold, mounted on block

Jun 14, 2009 | 1996 Nissan Maxima

2 Answers

How do i replace knock sensor on 98 maxima?


See this video:

http://www.youtube.com/watch?v=fPIMOIwLISc

Mar 22, 2009 | 1998 Nissan Maxima

Not finding what you are looking for?
1998 Nissan Maxima Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

723 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...