Question about 2007 Dodge Nitro

1 Answer

2007 dodge nitro so the fuses for my door locks and wiper pump keep blowing. Took the fuse box out checked all the wires. There is no exposed wires or wires crossing. Anything else it could be.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 11,492 Answers

What # fuse's J5 25amp , J4 25amp , M 30 15amp , M13 20amp M33 10amp . All these fuse's are power supply's for door modules and to the wiper / washer switch . The washer pump is controlled by the totally integrated power module . I suggest you google TIPM - dodge totally integrated power module . Chrysler , Dodge , Jeep all use this componet . Also watch youtube videos on finding a automotive electrical short . That's what you have a direct short to ground on those power supply circuits

Posted on Dec 14, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

98 Dodge Caravan keeps blowing the wiper fuse. Works for a few seconds then blows.


check for bare wires grounding out , wiper motor failure or wiper shafts seizing up and overloading the motor
using a bigger fuse will only result in the wiring harness burning out and possible fire in the car

May 21, 2017 | Dodge Cars & Trucks

1 Answer

Why does the fuse immediately blow on my power door locks? how to fix this?


You have a short somewhere in the system. Maybe one of the lock actuators or a switch. To test disconnect all locks and switch then replace fuse if don't blow start with driver door and reconnect lock check fuse see if it blew if not reconnect switch active lock check fuse see if ok. Continue with each door separate using same steps until fuse no good you will have found short. Replace shorted part.

Apr 30, 2016 | Cars & Trucks

1 Answer

Where the fuse box is located for dodge nitro 2007?


Where is the fuse for the lighter in a 2007 Dodge Nitro?

Feb 09, 2013 | Dodge Nitro Cars & Trucks

1 Answer

2007 dodge nitro fuse box diagram


It's 20A fuse M36 in the totally integrated power module

Feb 03, 2013 | 2007 Dodge Nitro R/T

1 Answer

Where is the fuse for rear brake lights on 2007 Dodge Nitro located?


In the fuse box, under the hood on the drivers side. There is a detailed map of what fuses do what on the inside of the box cover.

Jun 08, 2009 | 2007 Dodge Nitro R/T New Cars

1 Answer

Fuse blows on wiper when i start my 1999 dodge ram pickup


Hi my name is Allen!

When the fuse for the wipers keeps blowing, that means either the motor has a dead short within it and must be replaced, or the wiring going to the motor is damaged and shorting out on the vehicle body somewhere and must be repaired.

Here is how you check it; replace the blown fuse, unplug the connector from the wiper motor, then turn the key on if the fuse does not blow then you need to check the wiring to the motor if the wiring is not damaged anywhere replace the wiper motor.

For further assistance contact me at FixYa!

Dec 24, 2008 | 1997 Dodge Dakota

1 Answer

97 Dodge 2500 wiper fuse


this sound like the wiper motor auto wiper parking is shorting out and so with ign turned on this causing fuse to blow ? if motor has a short wire to earth on exterior ? usually brown ? this is auto park cut or disconnect then ensure you have correct amp fuse and see if fuse blows? if yes then provided the elec plug connector for motor is in good condition ? may well be motor has a fault on armature to earth? hope this helps

Nov 06, 2008 | 2007 Dodge Ram Truck

Not finding what you are looking for?
2007 Dodge Nitro Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...