Question about Maserati Cars & Trucks

Open Question


Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


only some workshop manuals have body measurements that are used by panel beaters to align body parts
as a workshop manual for your car would be scarce, it may be possible to get what you want by contacting the technical division at the manufacturing plant and getting a copy of the plan for the area that you want
an explanation that the body repair shop wants dimensions to complete repairs may help get what you want
e-mail may be the way to go but I would spend the money on a phone call as e- mails are sometimes answered by a person who is not really interested
at least with a call you get the name of a person and then a one on one e-mail would be effective

Dec 14, 2016 | Maserati Cars & Trucks

1 Answer

Will 1999 silverado rear truck axle fit a 2009 silerado ?

Axles on a specific year are not always the same, so you may want to check to see what the gear ratio is and compare to the one you want to install. Also will need to check measurements and diameters of both components.

Nov 24, 2016 | Cars & Trucks

1 Answer

Front end measurements on 93 crown vic

Wheel alignment dimensions will be found in a good repair manual or data book and body dimensions either in an official body repair manual or on a database dedicated to the needs of body repairers. I suggest you have a chat with your local accident repairer. I believe access to complete information is only possible for those organisations that pay a subscription to the data organisations.

Apr 25, 2016 | Cars & Trucks

1 Answer

What is the piston/cylinder clearance for a new rebuild?

Hi Dave:
Very interesting and technical question, and will vary depending on the engine being rebuilt. You will also encounter specific dimensions for end gap of piston rings, bearing clearances (plastigauge) valve seating, and oh so much more.
That leads me to ask, what is the motivation for the question, and the year, make, model, and milage of the vehicle involved?

Aug 31, 2015 | Cars & Trucks

1 Answer

What are the diagonal chassis measurements for a 2007 toyota hilux

you will get these from a toyota dealer from their workshop cd manual. However if you want to check the chassis for bends , the dimensions do not need to be known
place the vehicle over a flat floor and using a plumb bob on a sting line drop points onto the floor and mark the position on the floor . Use the same points on each side of the chassis
get as many marks on the floor as possible and put on the floor next to the mark where they came from on the chassis (ie rear spring hanger, foot step bracket , tank bracket etc)
move the vehicle out of the way and with a tape measure measure the diagonals of like points. Write the dimension on the floor on that diagonal. When finished the variations of like diagonals should be no more than 3mm max. The diagonal with the largest variation will indicate exactly where the chassis needs straightening

Dec 23, 2014 | 2007 Toyota Hilux 2.7

1 Answer

Rough idle at startup on a 1993 Oldsmobile Regency

Various results -- best to consult with your nearest car dealership for specific measurements.


Dec 24, 2012 | Cars & Trucks

2 Answers

What size speakers are in the doors

  • The factory speakers are 6x9 BUT the magnet on the factory speakers are much smaller than on aftermarket, higher quality 6X9 speaker making it almost certain the window will not roll down after installing an aftermarket 6X9.

  • Most go with a 6X5 because they are a bit smaller and there is a wider variety of them. Where ever you go to purchase that speaker. make sure the measurements are taking real well if going with another 6x9. There is always the option of the factory 6x9 but a nice aftermarket will fit in there so long as you mind the size.

  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.

Regards, Tony

Oct 07, 2011 | 1997 Jeep Grand Cherokee

1 Answer

1999 bmw 323i battery dead. Can i buy a typical battery from an auto parts store or is there something specific about bmw batteries?

as long as the battery you are purchasing is of the correct dimensions to allow it to be fitted correctly ie secured properly and is of a sufficient aprer hour rating to suit your car then go ahead fit it (most auto parts stores will keep you right.)

Jun 13, 2010 | 1999 BMW 323 Series

1 Answer

I would like to know the specifications for a 1983 tray back land cruiser, the measurements to ensure the diff is alighned correctly after an accident. The actual chasis dimensions please, this a model...

one of the easiest ways to check is to get a tape measure and check at middlepoints of wheels each side compare them they shouldnot be off. if you need more inf go to

Apr 11, 2009 | 1983 Toyota Land Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maserati Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

78267 Answers

Cosku Arsiray
Cosku Arsiray

Level 2 Expert

210 Answers

Are you a Maserati Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides