Question about Honda Cars & Trucks

2 Answers

The right side tail lights within the hatch of my 2006 Honda Odyssey are inop. I changed them and that didn't help. The outer lamps for the right tail light work OK. Where do I go now?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 784 Answers

Have you checked the fuses? Also check the earth wire to the lamp

Posted on Dec 14, 2016

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Honda Master
  • 1,038 Answers

See if u have voltage at the socket. Try a working bulb, If not ck the wiring for a break. usually at the trunk hindge is a popular electrical short location.

Posted on Dec 14, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The two tail light lamps inside the rear hatch on the right are inop. I changed them and that didn't fix it. Where do I go next? The left side works fine.


I wonder how many makes, models, and years vehicles have a rear hatch and two tail lamps on the right side.
Post a new question and include enough information so that we can provide some guidance.

Dec 14, 2016 | Cars & Trucks

1 Answer

What s the procedure to change stop light 2006 honda odyssey


Open the rear hatch. The lens assembly is held in place with two 10mm bolts located on the side panel, just under where the hatch closes.

after you remove the bolts the whole lens assembly will pull out and expose the bulb sockets.

Here is a video for a 2007 model. it is the same as yours.

Mar 14, 2015 | 2006 Honda Odyssey

1 Answer

How do i change tail lamps on honda odyssey van ?


The tail lamps are screwed on with nuts. When the tailgate is opened, you can see where the screws, that are holding on the lights, are located.

Sep 28, 2010 | 2003 Honda Odyssey

1 Answer

Need to change right tail light, how?


Open hatch, on inside there will be two plastic clips that go into the side of the tail light, remove the center of the plastic clips, they will pop out, remove the rest of the remaining clip, once you have the plastic clips out, tail light will come off, no screw's holding tail light, just those two plastic clips.

Sep 01, 2010 | 2006 Chrysler Town & Country

1 Answer

How to change rear tail light on 2006 honda odyssey


Lift the rear door, remove the rear tail light lense, replace the bulb and replace the tail light on the car.... once the screws have been removed, be sure all of them are removed,,, the lens/light cover may have to be pried off with a flat blade screw driver.... place a folded paper towel of something else to protect the paint.... before prying...... Check the owners manual for instructions.

May 13, 2010 | 2006 Honda Odyssey

1 Answer

How do you replace a brake light?


serjoijr: To replace the bulb, you must remove the tail lamp housing.
Open the tailgate. There are two screws which retain the lamp housing to the body. You can see them when you open the tail gate, One is near the top and one is near the bottom. They are a phillips head type screw.
Remove both screws and pull the lamp housing directly backwards. DO NOT TWIST IT TO THE SIDE! The housing has a pin on the opposite side which interlocks with the body, keeping it in place on that side.
Once you have pulled the housing away from the body, you will see the lamp sockets and wiring harness. These sockets usually rotate to one side or another to interlock with the housing. Once the socket is removed, you can replace the bulb and return the housing back to the original spot.

Jul 28, 2009 | 2004 Honda Odyssey

1 Answer

2003 honda ody tail lights


open the rear hatch. On the side of the tail light assembly nearest the hatch opening, their are two flush fit flap doors molded into the trim for the tail light. Use a small flat blade screwdriver and gently pry open these flaps. the hinge is on the side nearest the hatch opening. Under the flaps you'll find phillips head screws which you must remove. Finally, at the front outboard corner of the tail light housing, you must gently pry rearward on the tailight housing with a tape wrapped (prevents scratching your paint) flat blade screwdriver to release a spear point clip. Once its out, you can access the bulbs in the housing easily. Reverse steps to reinstall.

Mar 15, 2009 | 2003 Honda Odyssey

2 Answers

Removing rear light assembly on honda odyssey 2006


Yes, there is a "spear point" plastic clip that is still engaged into a socket type holder in the front outboard portion of the tail lamp assembly. Pry gently with a tape wrapped screwdriver at the front outboard corner of the assembly and the clip will release. You will then be able to see how the clip works and will be able to align and engage it first when replacing the tail lamp assembly.

-T

Jan 24, 2009 | 2007 Honda Odyssey

1 Answer

2003 Honda Odyssey Brake light replacement


open the rear hatch. Between the tail light housing and the rear hatch opening there is a trim strip with two flush fitted flap doors. Insert a small straight blade screwdriver into the small slot on the tail light side of the flap. Pry gently inboard and the small flap will open (the hinge side of the flap is on the side of the rear hatch opening.) Now you can remove the screws that hold the tail lamp assembly in place. Finally, there is still a "spear point" clip that fits into a socket near the front outboard corner of the assembly. Gently pry with a tape wrapped screwdriver (avoids scratches) and force the assembly straight back. The clip should release and free the assembly so you can change the bulb(s).

Jan 22, 2009 | 2003 Honda Odyssey

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...