Question about Cars & Trucks

1 Answer

My heater hose connects to the heater core inlet via a plastic connector,is this connector needed or can I connect the heater hose directly to heater core inlet

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 76,070 Answers

You need the part, it is either a flow restrictor valve or a shut off valve. If the part is a restrictor then you can rupture the heater by leaving it out.

Posted on Dec 14, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i replace radiator hose connector into firewall for 2004 yukon


If you're talking about where the heater hose connects to the heater core and the metal is corroded away then you'll need to replace the heater core. You don't need any special tools, but it's a time consuming job.

Oct 29, 2014 | 2004 GMC Yukon

1 Answer

How do i replace the heater core 1997 isuzu hombre


See me at website for images can only send one through this channel. www.autorepairhelp.us

Best Regards,

Master Tech Lee

HEATER BOX SHIELD
Image
Heater Box Heat Shield
Remove or Disconnect
1. Fasteners that retain heat shield to heater box assembly.
Image [ Heater Box Heat Shield
Install or Connect
1.Fasteners that retain heat shield to heater box assembly.
Tighten
-Bolts Screws to 2.2 N.m (25 lb in).
HEATER ASSEMBLY
Image ' Heater Hoses
Image ' A/C Evaporator Tube Assembly
Image ' Evaporator Core
Image ' Evaporator Core Assembly
Image ' Heater Assembly
Remove or Disconnect
1.Engine coolant. Refer to Draining and Filling Cooling System in Engine Cooling.
2.Heater hoses. Refer to Heater Hoses.
3.Instrument panel. Refer to Instrument Panel Replacement in Interior Trim.
4.Air inlet assembly. Refer to Air Inlet Assembly Replacement.
5.Vacuum lines.
Important
-Clearly label vacuum line connections.
6.Heater assembly studs inside engine bay.
7.Blower motor resistor. Refer to Blower Motor Resistor.
8.Stud inside heater core housing.
-Stud is revealed by removing the blower motor resistor.
9.Rear case screws.
10.Heater assembly.
11.Seals.
Imagt
Imagt
Imagt
Imagt
Imagt
Heater Hoses
A/C Evaporator Tube Assembly
Evaporator Core
Evaporator Core Assembly
Heater Assembly
Install or Connect
1.Seals.
2.Heater assembly.
3.Rear case screws.
4.Stud inside heater core housing.
Tighten
-Stud to 1.9 N.m (17 lb in).
5.Blower motor resistor. Refer to Blower Motor Resistor.
6.Heater assembly studs inside engine bay.
Tighten
-Studs to 1.9 N.m (17 lb in).
7.Vacuum lines.
8.Air inlet assembly. Refer to Air Inlet Assembly Replacement.
9.Instrument panel. Refer to Instrument Panel Replacement in Interior Trim.
10.Heater hoses. Refer to Heater Hoses.
11.Engine coolant. Refer to Draining and Filling Cooling System in Engine Cooling.
-Check the system for leaks.


Auto Repair Help US 699e5693-1e5b-4101-9428-b5c0b4e46f83.jpg

Sep 06, 2014 | 1997 Isuzu Hombre

3 Answers

Heater hose connector at firewall is broken


Hi. I just had the same issue on my '99 Silverado last week. There are two connections for the heater hoses to the Heater core. One is white and the other is black. The Black one is available at any autoparts store for about 5 bucks but the white one is a dealer only part that the autoparts store guys will say does not exist. That is the bad news. The good news is that you do not need to use the dealer only part. The black fittings worked just fine for me. You will need to use a fuel line disconnect tool to remove the existing fittings from the heater core. These should run between 10 and 20 bucks for a set. Good luck. Joe

Feb 09, 2011 | 1999 Chevrolet Silverado 1500

1 Answer

Diagram on how to replace heater core in 99 expedition


Removal & Installation 1997-2002 To Remove:
NOTE: Heater core must be vacuum leak tested before it is remove from vehicle if a heater core leak is suspected.
  1. Drain engine coolant.
  2. Remove instrument panel.
  3. For 5.4L (4V), if quipped, remove junction splash shield.
  4. For 5.4L (4V), if quipped, disconnect starter relay cable. ford-03-00-3579.gif

  5. For 5.4L (4V), if quipped, remove junction block bracket.
  6. Clamp inlet and outlet heater hoses.
  7. Disconnect heater hose from heater core by gently pressing it toward heater core.
  8. Remove A/C plenum demister adapter.
  9. Disconnect vacuum line.
  10. Remove 13 plenum chamber top screws.
  11. Remove blend door assembly from case.
  12. Remove heater core.
To Install:
NOTE: If needed, clean and lubricate coolant hoses with plain water.
ford-10-00-3098.gif

  1. Install heater core.
  2. Install blend door assembly to case.
  3. Install 13 plenum chamber top screws.
  4. Connect vacuum line.
  5. Install A/C plenum demister adapter.
  6. Connect heater hose to heater core.
  7. Release all clamps from inlet and outlet heater hoses.
  8. For 5.4L (4V), if quipped, install junction block bracket.
  9. For 5.4L (4V), if quipped, connect starter relay cable.
  10. For 5.4L (4V), if quipped, install junction splash shield.
  11. Install instrument panel.
  12. Refill engine coolant.
prev.gif next.gif

Aug 21, 2010 | Ford Expedition Cars & Trucks

2 Answers

Smoke coming from a/c vents on ford expedition with sweet smell


The problem is the heater core leaking behind the dashboard. Heater Core Removal & Installation 1997-2002 To Remove:
NOTE: Heater core must be vacuum leak tested before it is remove from vehicle if a heater core leak is suspected.
  1. Drain engine coolant.
  2. Remove instrument panel.
  3. For 5.4L (4V), if quipped, remove junction splash shield.
  4. For 5.4L (4V), if quipped, disconnect starter relay cable. ford-03-00-3579.gif

  5. For 5.4L (4V), if quipped, remove junction block bracket.
  6. Clamp inlet and outlet heater hoses.
  7. Disconnect heater hose from heater core by gently pressing it toward heater core.
  8. Remove A/C plenum demister adapter.
  9. Disconnect vacuum line.
  10. Remove 13 plenum chamber top screws.
  11. Remove blend door assembly from case.
  12. Remove heater core.
To Install:
NOTE: If needed, clean and lubricate coolant hoses with plain water.
ford-10-00-3098.gif

  1. Install heater core.
  2. Install blend door assembly to case.
  3. Install 13 plenum chamber top screws.
  4. Connect vacuum line.
  5. Install A/C plenum demister adapter.
  6. Connect heater hose to heater core.
  7. Release all clamps from inlet and outlet heater hoses.
  8. For 5.4L (4V), if quipped, install junction block bracket.
  9. For 5.4L (4V), if quipped, connect starter relay cable.
  10. For 5.4L (4V), if quipped, install junction splash shield.
  11. Install instrument panel.
  12. Refill engine coolant.
prev.gif next.gif

Aug 17, 2010 | 1999 Ford Expedition

1 Answer

I need to install a heater core for a 2001 Pontiac bonneville I need instructions on how to remove and install it.


prev.gif next.gif HEATER CORE REMOVAL AND INSTALLATION 1997–01 Models BONNEVILLE AND LESABRE
  1. Disconnect the negative battery cable.
  2. Drain the cooling system into a clean container for reuse.
  3. Remove or disconnect the following:
    • Heater hoses from the heater core
    • Right sound insulator
    • All necessary electrical connectors and remove the instrument panel compartment
    • Temperature valve actuator
    • Electrical connector and remove the HVAC programmer
    • Heater core cover-to-heater assembly screws and the cover
    • Heater core-to-heater assembly screws and the heater core Fig. 1: View of the heater hoses and clamp positions — 1997–01 Bonneville and LeSabre 93111g71.gif
      Fig. 2: View of the heater core cover — 1997–01 Bonneville and LeSabre 93111g72.gif
    To install:
  4. Install or connect the following:
    • Heater core and the heater core-to-heater assembly screws, then, tighten the screws to 12 inch lbs. (1.4 Nm)
    • Heater core cover and the cover-to-heater assembly screws, then, tighten the screws to 12 inch lbs. (1.4 Nm)
    • HVAC programmer and connect the electrical connector
    • Temperature valve actuator
    • Instrument panel compartment and connect any necessary electrical connectors
    • Right sound insulator
    • Heater hoses to the heater core
  5. Refill the cooling system.
  6. Connect the negative battery cable.
  7. Operate the engine to normal operating temperatures; then, check the climate control operation and check for leaks.

Jul 01, 2010 | 2001 Pontiac Bonneville

1 Answer

Heater core? can't find a manual anywhere


the heater core inlet and outlet com out of the fire wall on the drives side of the battery after the car cools you can connect a garden hose to one side an and another hose to the other side and flush it out. the hoses have a corragated plastic cover over them that is split in the back it should just pull off, the hoses are connected with pressure clamps squeeze them and pull them down then pull hoses off. flush the system both ways good luck

Feb 02, 2010 | 1999 Volkswagen Passat

1 Answer

Need to replace heater core


big job, dificulty 8 on a 10 scale Heater Air Plenum Chamber Removal
  1. Remove heater outlet floor duct (18C433) as described.
  1. Remove instrument panel (04320). Refer to Section 01-12 .
Instrument Panel SPECIAL SERVICE TOOL(S) REQUIRED Description Tool Number Radio Removing Tool 415-001 (T87P-19061-A)
Removal and Installation
  1. Disconnect battery ground cable (14301).
  1. Remove RF wheel and tire assembly. Refer to Section 04-04 .
  1. Remove three nuts in radiator coolant recovery reservoir area.
  1. Remove bolt retaining front fender apron (16054) to front fender (16005) .
  1. Position front fender splash shield out of the way.
  1. Lower vehicle.
  1. Tag and remove main harness connector from jumper harness (located in front of blower motor).
  1. Remove steering column. Refer to Section 11-04 .
  1. Remove RH cowl side trim panel (02344) and LH cowl side trim panels (02345) .
  1. Tag and disconnect wiring connectors in LH and RH cowls.
  1. Remove ground wire located on LH cowl side.
  1. Remove RH instrument panel upper moulding (04268) and LHinstrument panel moulding (04389) from instrument panel (04320) by pulling away from instrument panel and snapping out of retainers. Disconnect wiring connectors as required.
  1. Remove glove compartment (06010).
  1. Remove instrument panel upper finish panel (044A90) and disconnect the A/C sunload sensor (19E663) and anti-theft indicator, if equipped.
  1. Disconnect the heater water hoses (18472) from the heater core tubes. Plug the ends of the heater water hoses to prevent coolant loss.
  1. Plug heater core tubes securely to prevent coolant leakage from heater core (18476).
  1. Remove one nut retaining the upper LH corner of the A/C evaporator core housing (19A559) to the dash panel (01610) .
  1. Disconnect two vacuum supply hoses from vacuum source. Push grommet and vacuum supply hose into passenger compartment.
  1. Disconnect wiring harness from A/C electronic blend door actuator.
  1. Disconnect the white vacuum hose from the heater and A/C air inlet duct door vacuum control motor (18A318).
  1. Remove nuts from the studs along the lower flange of the heater air plenum chamber (18471).
  1. Disconnect connectors to A/C electronic blend door actuator and electronic module on side of heater air plenum chamber.
  1. Remove heater air plenum chamber by pulling rearward.


Heater Air Plenum Chamber and Air Inlet Duct

8b51d06.gif



Item Part Number Description 1 19C836 Suction Accumulator/Drier 2 56956-S2 Screw (2 Req'd) 3 386877-S36 Screw 4 45445-S36 Nut and Washer Assy 5 19C928 A/C Recirculating Air Duct Screen 6 386877-S36M Screw (2 Req'd) 7 45332-S12 Nut and Washer 8 19B762 A/C Air Inlet Door Inner Seal 9 19C590 A/C Recirculating Air Duct 10 18471 Heater Air Plenum Chamber 11 18C433 Heater Outlet Floor Duct 12 55734-S2 Nut 13 19A559 A/C Evaporator Core Housing 14 45332-S2 Nut and Washer A — Tighten to 2.5-3.2 Nm (23-28 Lb-In)
Installation
  1. Route the vacuum supply hose through the dash panel and seat the grommet in the opening.
  1. Position the heater air plenum chamber under the instrument panel with the A/C register duct opening up and the heater core tubes down. Connect wire harness connector to A/C electronic blend door actuator and electronic module on side of heater air plenum chamber .
  1. Rotate the heater air plenum chamber up behind the instrument panel and position the heater air plenum chamber to the dash panel. Insert the heater core tubes and mounting studs through their respective holes in the dash panel and the A/C evaporator core housing.
  1. Install three nuts on the studs along the lower flange and one on the upper flange of the heater air plenum chamber.
  1. Install three nuts below the windshield wiper motor (17508) to retain the LH end of the heater air plenum chamber to the dash panel.
  1. Install one nut to retain the upper LH corner of the A/C evaporator core housing to the dash panel .
  1. Connect the white vacuum hose to the heater and A/C air inlet duct door vacuum control motor.
  1. Connect the vacuum jumper harness to the plenum harness at the multiple vacuum connector near the heater outlet floor duct. Install heater outlet floor duct.
  1. Connect the sensor tube to the evaporator case connector on EATC-equipped vehicles.
  1. Connect vacuum supply hose to vacuum supply.
  1. Unplug the heater core tubes and connect the heater water hoses to the heater core tubes.
  1. Fill the cooling system with coolant to replace coolant lost during removal of the heater air plenum chamber.
  1. Install heater outlet floor duct as described.
  1. Install instrument panel. Refer to Section 01-12 .


Section 12-03A: Air Conditioning System—Manual A/C-Heater 1998 Crown Victoria, Grand Marquis Workshop Manual
REMOVAL AND INSTALLATION Heater Core Removal
NOTE: If a heater core leak is suspected, the heater core must be pressure leak tested before it is removed from the vehicle. Refer to Section 12-00 .

  1. Remove the heater air plenum chamber (18471) assembly as described.
  1. Remove the heater dash gasket (18570) from the heater air plenum assembly.
  1. Remove the four retaining screws from the heater core cover (18B300) and remove the heater core cover from the heater air plenum chamber assembly.


Dec 15, 2009 | Mercury Marquis Cars & Trucks

1 Answer

HOW DO U GO ABOUT PUTTING IN A HEATER CORE. NEED


1. drain coolant
2.remove instrument panel
3. for 5.4 (4v) if equiped,remove junction splash shield
4.for 5.4 (4v) if equiped, disconnect starter relay cable9ad8eea.gif
  1. For 5.4L (4V), if quipped, remove junction block bracket.
  2. Clamp inlet and outlet heater hoses.
  3. Disconnect heater hose from heater core by gently pressing it toward heater core.
  4. Remove A/C plenum demister adapter.
  5. Disconnect vacuum line.
  6. Remove 13 plenum chamber top screws.
  7. Remove blend door assembly from case.
  8. Remove heater core.
To Install:
NOTE: If needed, clean and lubricate coolant hoses with plain water.

0f0dfb5.gif
  1. Install heater core.
  2. Install blend door assembly to case.
  3. Install 13 plenum chamber top screws.
  4. Connect vacuum line.
  5. Install A/C plenum demister adapter.
  6. Connect heater hose to heater core.
  7. Release all clamps from inlet and outlet heater hoses.
  8. For 5.4L (4V), if quipped, install junction block bracket.
  9. For 5.4L (4V), if quipped, connect starter relay cable.
  10. For 5.4L (4V), if quipped, install junction splash shield.
  11. Install instrument panel.
  12. Refill engine coolant.
I hope this helps you

Nov 12, 2009 | 2000 Ford Expedition

4 Answers

Male fitting on heater core inlet broke off in hose


RKmastertech is incorrect. That plastic fitting is seperate from the aluminum heater core and can be removed by means of a special quick disconnect tool, like OTC 6046. Rock auto has the fitting for $5 plus shipping, just for a reference.

Sep 27, 2009 | 1999 Chevrolet Silverado 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...