Question about Peugeot 206

2 Answers

How do i replace the rear wheel bearing on my peugeot 206 1.9hdi year 2002 my rear wheel bearing has gone on my pug206 and i want to know how to fix, replace and repair myself i have bought the rear wheel bearing kit but unsure how to replace it please help!!!

Posted by on

  • 1 more comment 
  • Anonymous Mar 18, 2014

    How to replace 2006 caddie cts rear wheel bearing

  • Anonymous Mar 18, 2014

    How to replace 2006 caddie cts rear wheel bearing

  • Anonymous Mar 22, 2014

    How do you replace rear wheel bearing in t100 4wd1996 model Toyota

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 101 Answers

Wheel off remove the tin cap in the centure of the hub undo the big nut put the wheel back on with just 2 bolts finger tight so you can pull the hub off.once the hub is off take the 2 wheel bolts back out.now look in side the hub were the big nut was and you will see a sir clip take that out.then use a socket and a bench vice to press the old bearing out.use the socket and bench vice to put the new bearing back in.

Posted on Aug 01, 2009

  • tomekmochals
    tomekmochals Jun 20, 2012

    yh mate you try and make that circlip removal sound sooo easy

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

When you have the wheel off, in the center you will see a metal cap. take that off and you will see a large nut covered by a cotter pin and cover take them off, undo the nut ant-clockwise. when the nut is off a washer and the outer bearing will come out with the hub. that's your first bearing to change, The inner bearing is in the hub at the back. and that one will be a bit more hard to get out,
To get it out use a turn the front of the hub facing you support the hub off the ground just about 2inch. get a long blunt screwdriver and put it in through the hole int he hub. you will see the bearing just place the screwdriver between the bearing and the hub and tap it out evenly around.
To put the back bearing in the hub, turn the hub face down and place the new bearing on top of the hub evenly and use a piece of wood and tap the bearing in and replace the rubber too. The front is easy and removing the old one.

Good luck!!

Posted on Jul 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2006 peugeot 206 1.6 16v. How do I replace the rear wheel bearings


Hi you will need a hydrolic press for the job. Remove wheel, brakes, and center hub net. Then remove the clip holding in the bearing. Good luck.

May 07, 2015 | Peugeot Cars & Trucks

1 Answer

How do i replace the front wheel bearing on my peugeot 206


Need new front wheel bearings on Peugeot 206 02 plate how do you change the bearings

Feb 17, 2012 | Peugeot 206 Cars & Trucks

1 Answer

We are bearing factory from China,We supply all kinds of needle roller bearing Cam followers, Yoke Type Track Rollers,needle roller, auto bearings,with high quality and competitive price ! peugeot...


no thanks only buy swedish or german bearings a they last forever ,compared to chinese stuff like the bearing in a swimming pool pump i bought from china ,less than a week and its noisy ,last pump lasted 22 years

Aug 25, 2011 | Peugeot 405 Cars & Trucks

1 Answer

Does anyone know the torque wrench settings for the rear hub/wheel bearing nuts on a 2002 Peugeot 206 1100cc please? Also the road wheel bolts?


Tightening torque for the hub nut is 200Nm and the road wheels are 85Nm

NOTE: The rear wheel bearings are remowned on these cars for sticking to the stub axle quite badly, and often have to be forced off using a slide hammer on the drum, it is quite common to end up damaging the wheel bearing, so be prepared to replace this as well in this event

Jan 23, 2010 | 2005 Peugeot 405

1 Answer

Replacing front wheel bearings on 2002 new bettle


how to change rear wheel bearing on vw. beatel 2002 1.9

Dec 18, 2009 | 2001 Volkswagen Beetle

2 Answers

I have a pougeot 206 gti and it is knocking at rear on bumpy roads also found it to snake around fast bends, seams to be play on rear wheel


It could be wheel bearings, jack the rear wheel up and grab the top and bottom, wobble it, and if it wobbles alot, then the bearing has gone, or you may just need to grease them up.
It could also be susoension bushes( rubber or nylon inserts on the bolt points ) again, jack the rear up and look at the bolts that hold the suspension on and wobble the components to check if they move too easily( you will always have a small amount of freeplay ) REMEMBER TO USE AXLE STANDS AND CHOCK THE FRONT WHEELS WHEN WORKING UNDER A CAR, EVEN WHEN ON AXLE STANDS you don't want a tonne of steel pinning you down.

Sep 26, 2009 | Peugeot 505 Cars & Trucks

2 Answers

Whining noise rear passenger wheel and it's not properly in line how do I fix this?


Hi I am Vortash sounds like you have a rear wheel bearing gone , they sound like a whine at first then they get progressively worse to a grinding sound you should replace it as soon as possible before it damages your spindleregards Vortash

May 30, 2009 | 2003 Lexus Gs 300

1 Answer

Rear wheel axel Ford F150 2002 how do I dismantel it to check if it is a bearing, making a clunk sond , parked as it has gotten, worse. I have very little money and I would like to fix it myself.


check for a propshaft UJ worn first vehicle up in air wheel free then grasp front and rear of each joint in turn and give it twist ,iam pretty sure this has gone and not the pinnion/crownwheel.

Nov 18, 2008 | 2002 Ford F150 Regular Cab

3 Answers

2002 ford Ranger 3.0 v6 (auto) rear end noise when accelerating on curves.


Remove the drums and check your rear brakes. If okay, you may try testing a couple different tires in the rear. Belts separating and flat spots show worse at higher speeds.
It could be bearings if truck is used alot while loaded. Remember 1/4 ton is only 500lbs. High miles, hard driving, or if it was wrecked in rear could all cause these smptoms.

Jul 17, 2008 | 2002 Ford Ranger Regular Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12,921 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...