Question about Cars & Trucks

Open Question

Put 4x4 in truck it becomes un stable

When i put my o5 envoy in 4x4 it becomes unstable trying to steer the truck

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 548 Answers

SOURCE: 1996 Chev 4x4, short cab, long box, unstable when hit bumps

sounds like aeither a shock or a stabilizer bar or tie rods you can check all of these yourself , check the shocks by pushing down on the corner of your truck three times and it should bounce no more than 3 times and stop if it seems very loose and bounces alot they are usually bad, to check the tie rods and stabilizer bar just jack up the vehicle and then secure it with a axle jack or some type of block that will kep the vehicle from falling then just reach under and try to move the stabilizer bar and tie rods by hand and see if they move easily if they move by hand they are shot but they may not move and still be bad and you would have to have them checked at a shop

Posted on Sep 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can a bad deferential cause steering issue on 2002 envoy


I am assuming your mechanic was refering to the front differential and your vehicle is 4x4. If the vehicle is in 4x4 all the time you may notice a " hopping " feeling on corners from the front wheels. Otherwise, the differential should not cause steering issues. What type of problem is the vehicle experiencing that concerns you and would lead your mechanic to assess a bad diff?

Jan 20, 2016 | 2002 GMC Envoy

1 Answer

What make my subaru impreza 2007 wobble when braking


possibly a warped rotor this is caused a lot by breaking hard in wet conditions try having your rotor turned

Aug 14, 2012 | Subaru Impreza Cars & Trucks

1 Answer

I have a 1998 holden rodeo dual cab 4x4 and i have just raised it 2 inches wound up tausion bars and new springs in the rear i was told to raise it any higher i will have to spend alot of money to do so...


By cranking up the front end using the torsion bars you'll also be altering the camber adjustment of the steering wheels, which is not a good idea....You'll also be altering the handling characterisicts of the vehicle and it could become very unstable on the road....Watch out!

Oct 02, 2010 | 1998 Isuzu Rodeo

2 Answers

VAGUE AND WANDERING STEERING ON 1990 HILUX 4 X4


Wandering is usually caused by toe-out. Did the aligner use front wheel drive specifications for this rear wheel drive truck? A front wheel drive toes in when the wheels are pulling the car, but the front wheels on your truck drag back to a toe-out position if steering parts are worn. Try pushing the fronts of the front wheels apart. They should still be at least a 16th of an inch closer in the front than in the rear of the tires.

Sep 10, 2009 | 1990 Toyota Pickup

3 Answers

Wont shift back from 4x4 low, to 2x2


I also have a 2002 Envoy. Shifting to and from 4wh and 4wa can be done on the fly but shifting to 4wL has to be done stoped and while in neutral. Try that. Otherwise I'm afraid its a new computer for you. Its located under the left rear seat and you need a loan for one.

Sep 05, 2009 | 2002 GMC Envoy

1 Answer

Vibration in front end


It is likely both your track bar and the lack of a steering gear box stabilizer. The bushings on your stock track bar can be replaced with polyeurethane or metal bushings which will help curb the problem.
The steering stabilizer attaches to your steering gear box and your frame allowing the steering to be more stable. I have put both on my truck and it drives like a caddy now as a result. If I had to choose between the two items, my money would go to the steering stabilizer first. I believe I bought mine here:
http://www.xtremediesel.com/bd-powerperformancedodgesteeringstabilizer.aspx
Hope this helps

Apr 05, 2009 | 2006 Dodge Ram 2500

2 Answers

2003 gmc envoy xl brake lights dont work


sounds like a fuse look under the dash panel for fuse cover look at the back of cover and check that fuseThanks for using fix ya Please rate my response thank you very much

Jan 30, 2009 | 2004 GMC Envoy

1 Answer

2003 gmc envoy 4x4 not working


My 2005 Envoy 4WD is not working. Switc is currently on 2HI, but light is showing AWD. What is the problem???

Dec 20, 2008 | 2003 GMC Envoy

1 Answer

Rear heat problem


Have the samw problem withm o5 took to the dealer and they said it is a know problem and it will cost 635.00 to get an auxilury pump for the heater core in the back. Something about not enough coolent.

Nov 19, 2008 | 2005 GMC Envoy Xl

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...