Question about 1997 Nissan Sentra
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: hi I ned to know
hi.im a mechanic from the philippines.the torque of all your cylinder head for your nissan sentra 1997 is 60 nm.apply 30 nm of torque first on all the cylinderhead bolts then torque it agian directly to 60 nm. i also drive and repair nissan cars.
Posted on Aug 11, 2008
it should be underneath your car in between the firewall and the engine. Now you don't want to supply direct power to your starter because you'll end up frying it. However to just start the car once you've located the starter, get a long screwdriver with a plastic handle and connect the two wires with the screwdriver.
As for a long term fix, without investing the money to replace the necessary parts. You will need to attach a wire that can handle 12v to both wires on your starter separately. Then connect the other ends of both wires to a switch that can handle 12v, and mount that in your car somewhere. Then whenever you need to start your car just flip the switch on until the car starts then once it is started flip it back off.
I know this sounds like a lot but it is very doable with about $5 and a little bit of time.
Posted on Jan 30, 2009
Negative battery cable Air inlet tube Harness bracket Wiring at the starter Starter
Install or connect the following:
Starter and torque the bolts to 60 inch lbs. (7 Nm) Starter electrical connectors Harness bracket Air inlet tube Negative battery cable
Thanks for using FixYa - a Very Helpful rating is appreciated for answering your FREE question.
Posted on Jul 31, 2009
Two ways...Nissan puts the key code on a piece of white tape and sticks it on the inside of the glove box door. However, someone could have pulled it off at some point. Check there first. Secondly, the original owners paperwork should have the key code on it. If you are not the original owner, or do not have access to that person, but know the dealer where the car was originally sold, they would have the paperwork on file, they probably do not have a way to cross reference the serial #, so you would likely have to know the original owners name in order for them to look up the archived deal and get the number from the paperwork. The only other suggestion I might have is to get a locksmith to cut you a key. Good luck! I hope you find this to be very helpful! Check the glovebox!
Posted on Dec 12, 2009
Tips for a great answer:
Jan 27, 2012 | 1997 Nissan Sentra
Apr 02, 2011 | 1994 Nissan Sentra 4-Door
Mar 17, 2010 | 1997 Nissan Sentra
Nov 08, 2009 | 1997 Nissan Sentra
Jul 31, 2009 | 2005 Nissan Sentra
Mar 12, 2009 | 1996 Nissan Sentra
Aug 07, 2008 | 1989 Nissan Sentra 4 Door
18 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: