Question about 2005 Buick Century
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
You have a bad starter. A faulty starter will function when its cold but when it heats up, it takes more energy to get the starter to engage. Your problem is exhibiting the classic symptoms of a bad starter. I hope this solves your problem and the best of luck to you.
Posted on May 11, 2009
Spray the beejesuz out of the inside of the tumbler/keyhole with WD40...replace the key and try again...Otherwise an ignition assmbly might be available through a junkyard?
Posted on Jun 14, 2009
SOURCE: 99 buick regal won't start
Hello, the Regal seems to have that problem. Insert your key in the ignition and turn it but do not turn the car on, make sure you here the fuel pump kick in, then at the end of you r fuel rail there should be a cap, remove it, use a very thin screw driver and push that part in, Be careful it's going to squirt gas, that's a good sign. If it does not, check your fuel filter. And last, if nothing above described works first check your negative wire on your fuel pump, second your injectors, they might be clogged.
Best of luck, God Bless.
Posted on Aug 14, 2009
we have 1998 ford f15 we replaced the ignition and it still wont start the truck,, the key turns over now and the radio and everything comes on but it wont start, what is wrong???
Posted on May 09, 2010
Tips for a great answer:
Sep 18, 2015 | 2002 Buick Century
Feb 22, 2013 | 1997 Buick Century
May 05, 2017 | Cars & Trucks
Mar 12, 2012 | 2005 Buick Century
May 02, 2010 | 1999 Buick Century
Jun 15, 2009 | 1995 Honda Prelude
Jan 30, 2009 | 2005 Buick Century
Jul 17, 2008 | Buick Grand National Cars & Trucks
60 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: