Question about Cars & Trucks

Open Question

My d17 will not turn right without Schelling the belt it is a 1967

Posted by on



Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where can I get a Ford Falcon 4000. 1967 drivers manual? Please help. Just bought one without a manual, so I don't even know where the jack goes! David

Most of the pages will be on Google images.
Search Google for "1967 ford falcon manual"
Alternatively, you can buy a CD of it here:

Oct 24, 2016 | Ford Cars & Trucks

1 Answer

190xt 3 point won't lift or very slow when hot

Series IV D17 3 point problems - AllisChalmers Forum - Page 1 ... > ... > Allis Chalmers > Farm Equipment

Apr 15, 2013 - 30 posts - ‎11 authors
I have a few issues with the three point on my D17. ... As soon as I close it, the armsraise back up (not ever touching the spool valve lever). ..... for 50 HP and a hydraulic pump with great volume at slow engine speeds. ... Or the oil is just cold and they won'tgo all the way down normally unless the oil is hot?

Nov 26, 2015 | Cars & Trucks

1 Answer

What is belt diagram for l967 Camaro 250 CI

it should be straight forward you may need 2 different belts ,but it should start at crankshaft go over alt and over power steering

Sep 07, 2014 | 1967 Chevrolet Camaro

1 Answer

What is belt replacement routing for Camaro 1967 250 CI?

You really do not need a routing diagram, you will have a separate belt for each accessory. You just have to align the belt in the grooves. It might help to stand off to the side of the car and look across the pulleys. You will have one for the alternator, one for the power steering if it is equipped with it, and one for the A/C if it is equipped with it. The waterpump is usually run of of the other belts routing around it.

Sep 07, 2014 | 1967 Chevrolet Camaro

1 Answer

1967 GTO with starting problem.

kevin it sounds like its your ignition lock tumbler key and not your switch you can find it at an autozone store near you.

Apr 27, 2014 | 1967 Pontiac GTO

1 Answer

Belt assembly 1967 olds 425

If I remember right, power steering on the inside from the ceank to power steering. Next out is the alternator, crank over the fan and the alternator. Last out would be A/C, over the crank, the fan and the A/C compressor. When you are done, look at the belts from the passenger side. They should line up straight on themselves. If not then either shims are needed for a slight bend or thet are on the wrong pulleys if there is a severe bend.

Oct 12, 2013 | Oldsmobile Toronado Cars & Trucks

1 Answer

What is recall D17, for my 2000 dodge caravan?

Well, contact the dealer

Were at home & use the site the
same as you.

Jun 27, 2012 | 2000 Dodge Caravan

1 Answer

1967 PONTIAC 400 ENGINE-What is the right number head for that year engine,also can I put a 1975 crank in a 67 engine block without machine work. THANKS FRANK

Pretty skimpy info there toolbox. Which engine do you have?
In 1967 Pontiac made 326, 400, and 421 engines. They all have the same main bearing size, 3.00 inches, rod size, 2.250 inches and the same stroke, 3.750 inches.
In 75, they only made the 400 and 455. The 75 400 uses the same crank but the 455 uses the same rod size but a larger 3.250 main, and 4.210 stroke.
So any year 400 crank will fit any other year 400, 389, or 350.
Google Kauffman Racing, Wallace Racing or Pontiac Dude.



Dec 09, 2009 | Pontiac Firebird Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

78010 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14405 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides