Question about Nissan Cars & Trucks

1 Answer

I still have the same code on the car coming on. what else can it be?

I have a 2000 nissan maxima got the code p1320 i know what causes it and i replaced them,all coils,plugs,O2 sensor and condenser. i put premium gas in it. still on. will it be ok to drive it like that with the TCS and SLP light on with the check engine light on. Does that affect the brakes. what else can it be the crank sensor or the ECM gone bad? they aren't cheap. any suggestions???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 575 Answers

Disconnect the battery over night to reset the engine code. If it comes back, then the problem has not been repaired. The P1320 code means that there is problem with the "Ignition Coil" or the wire to the ignition coil. Good luck!

Posted on Dec 13, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Could a bad battery cause a p1320 code on my 2000 maxima


I wouldn't troubleshoot anything, unless you had a good battery with a full charge. Go from there.

I realize the code has to do with ignition system.

Dec 09, 2015 | 2000 Nissan Maxima

1 Answer

P1320 2000 broken wire


Here is a link to a Nissan forum that discusses your problem..In the 2nd post there is a link to the service manual for trouble shooting this issue. It seems that it is more common than not.

http://x.nissanhelp.com/forums/maxima/9813-2000-nissan-maxima-p1320-code.html

Oct 26, 2011 | 2000 Nissan Maxima

2 Answers

P1320 Code "ignition control signal


Faulty ECM.Get the ECM tested it will cause this problem.These computers are exspensive.

Apr 21, 2011 | Nissan Pathfinder Cars & Trucks

1 Answer

What is P1320 manufacturer code


I found a thread on Maxima.org relating to the P1320 error code. Specifically, 2000-2001 Maxima's have had this problem. It seams as though everybody agrees that the error is caused by the ignition coils. We've never had ours changed, so I'm doing that. Nissan was going to charge me approx $600 (plus tax) for parts and another $180 for labor. The job take a whole 30 minutes to replace the 6 of them, and you can get the 6 ignition coils at O'reilly's for $325. I changed three last night and the car seems to be doing better. I'll replace the other 3 tonight and see what happens.

Also, when testing the car, the car seems to "shake". I'm not sure if this is related to the P1320, but if we turn off the AC the "shaking" stops.

Hope helps (remember rated this).

Jun 01, 2010 | 2000 Nissan Maxima

1 Answer

Engine diagnostic code P1320, 2000 nissan maxima can you please let me know what sort of problem or repair this code represents.


P1320 is the Ignition Signal Primary. There is a technical bulletin for this code for this vehicle. To remedy this issue, you will need to replace all 6 ignition coils. I suggest that you purchase them from a Nissan dealer to make sure you get the right ones.

Dec 07, 2009 | 2000 Nissan Maxima

1 Answer

Problem code p1320 came up on my diagnostic


sounds like one of your ignition coils are starting to fail, try and find a good price for all 6 on ebay

MIL (check engine light) "ON" with DTC P1320 stored in the ECM Intermittent spark knock (detonation)
  • Check the ECCS wiring harness for a broken or damaged wire.
    1. If the ECCS harness has a broken or damaged wire that is causing the symptom(s) noted above, repair the harness and verify the incident is resolved.
    2. If the ECCS harness does not have a broken or damaged wire and is NOT causing the symptom(s) listed above, proceed with step 3 below.
  • Replace ignition coil(s) with the one(s) listed in the Parts Information table, and verify the incident is resolved.


  • Nov 28, 2009 | 2000 Nissan Maxima

    2 Answers

    2001 nissan sentra xe p1320, p1140 codes car intermittenly looses power, when started in the morning while cold car runs fine until operating temp.


    Distributer Signal Output is code p1320........Intake Valve Timing Control Position Sensor Bank1 is code p1140...

    Oct 19, 2009 | 2000 Nissan Maxima

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    16 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Nissan Experts

    yadayada
    yadayada

    Level 3 Expert

    75797 Answers

    Phil Lovisek
    Phil Lovisek

    Level 3 Expert

    713 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    Are you a Nissan Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...