Question about 1991 Subaru Justy

Open Question

Everything about 91 Subaru justy 4x4

My justy is not getting the power it should when driving and I shift gears it doesn't want to go what is the problem also the shifter is real loose and r u supposed to be able to move the shifter without pushing in on the clutch

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Location of fuel line and fuel pump on a 1988 Subaru Justy

I imagine you have found it by now but just in case, the fuel pump and filter are mounted on the underside of the frame just ahead of the left rear suspension.

Posted on Jul 05, 2008

emissionwiz
  • 75822 Answers

SOURCE: The clutch on my '99

U are welcome, glad to help.

Posted on Dec 15, 2008

  • 58 Answers

SOURCE: SUBARU AUTOMATIC GEAR BOX CAN NOT CHANGE IN DRIVE SHIFT

Check the transmission fluid level. If it is low, fill it. Otherwise, if you happen to have a Subaru Select Monitor or equivalent, then you can read the fault codes for the 4EAT transmission and it will tell you which internal solenoid valves are sticky. At that point you can either add a quart of stuff that says it solves transmission problems and hope for the best, disassemble the transmission and change the problem valves, swap the transmission for one that works, or take it to someone to have it repaired.

Posted on Mar 21, 2009

  • 18 Answers

SOURCE: button on console and power button

The power button extends the time in each gear, the other button I think your describing juts up vertically in front of the AT selector. if you press this down you'll find that you can move the selector without having the ignition key in, it's a get out of jail card really

Posted on Jul 28, 2009

  • 14 Answers

SOURCE: subaru justy radio code

The only way to retrieve a radio code if you cannot contact the original dealer with proof of ownership (If they keep it on file) is to have the radio removed to get the serial number and have them retrieve it for you through the manufacturer.....NO other way.

Posted on Aug 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1989 subaru justy fuse box where is it located? video of how to replace bad fuse - video


FIRST I checked my favorite site for your drawings...
BBB Industries... (pretty bad (unusual))...

Here is where I recommend (if you are goig to work on this a lot... get the FACTORY+WORKSHOP repair manuals...!!!

The internet "wisdom"... is about as good as a
politician's word (80 to 90% pure beef extract).

Posted ASK
"1989 subaru justy fuse box heater video"

Ask com What Your Question

or BING

https://www.bing.com/videos/search?q=1989+subaru+justy+fuse+box+heater+video&FORM=HDRSC3
1989 SUBARU JUSTY 1 2L L3 Blower Motor Control Module Resistor RockAuto

Jan 14, 2016 | 1989 Subaru Justy

1 Answer

I own a 1991 Subaru justy gl , when driving in any gear , the rear transaxle/wheels will start making a thudding and squeaking sound. Any ideas at what a troubleshoot would be ?


Could be any number of things. Usually, dealers will diagnose for $100. It may be a serious problem that may contribute to a situation you or your insurance company would not want you to be in.

Mar 18, 2015 | 1991 Subaru Justy

1 Answer

91 legacy wont go into gear runs and you can shift thru the gears push in and let out clutch nothing get a kittle grind sound when you try reverse


could be shift fork thats in the tranny or it you could have snapped the main shaft not an easy fix you might want an expert mechanic to take a look at it good luck

Jan 25, 2013 | 1990 Subaru Legacy

1 Answer

Subaru justy wont go into any gear


when was the clutch plate last replaced was it lately and the problem just started after the change
next there is a bush/bearing in the center of the crankshaft that failes/ dry and that seizes in the input shaft of the gear box and makes the clutch useless as it drives the box all the time
another thing is any oil or grease on the clutch lining will stick the plate to the flywheel face and cause a problem
if the clutch plates are old , the damper springs can come out /break and intere with the flywheel mounting bolts
removing the transmissions and checking the clutch assemblies will reveal the reason for the failure

May 21, 2017 | 1990 Subaru Justy

1 Answer

91 justy does not go into any gear,cvt cable fine,engine runs good,moving lever on trans does nothing


The CVT Buffer brushes may be worn out or the transmission band may be broken -- need to have checked by certified transmission tech

Jan 08, 2010 | 1991 Subaru Justy

1 Answer

Subaru justy radio code


The only way to retrieve a radio code if you cannot contact the original dealer with proof of ownership (If they keep it on file) is to have the radio removed to get the serial number and have them retrieve it for you through the manufacturer.....NO other way.

May 29, 2009 | 1994 Subaru Justy

1 Answer

Setting the timing in a 1993 subaru justy


If you are talking of the rubber timing belt setting then rotate the cam gear till the timing mark (small hole) on the camshaft gear aligns with the mark on the plastic cover behind it. Mark is on top of plastic cover (12 'o' clock).
Rotate the crank till the timing mark (groove, not the one for the crankshaft woodruff key) on crankshaft gear is aligned with the mark on the bottom of the plastic cover behind it. (6 'o' clock).
Tighten tensioner against timing belt rotate engine a few times make sure alignment of timing marks remain.

Dec 14, 2008 | 1992 Subaru Justy

1 Answer

91 subaru justy wont run unless clanp on return fuel line


measure fuel pressure with engine idling the fuel gauge should read 20-24 psi if not within specification replace the fuel pressure regulator.

Oct 26, 2008 | 1994 Subaru Justy

1 Answer

Gear shift


pressure plate and throwout bearing...about 300 if you have a shop do it....could also be a linkage issue but probably the former not the later.

will

Aug 20, 2008 | 1993 Subaru Justy

Not finding what you are looking for?
1991 Subaru Justy Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...