Question about Cars & Trucks

Open Question

What is the torque wrench setting onhead bolts a tecumseh model # ohsk55 69513c

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
james klgr
  • 362 Answers

SOURCE: torque wrench settings

please understand there are a lot of items on a car that require torque settings every thing from the lug nuts to every engine bolt, and transbolt. please be more specific

Posted on Jul 03, 2008

Ad
  • 4 Answers

SOURCE: head bolts torque settings

According to my haynes manual for G-S reg, 1989-1998 it goes as follows,
Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head.
Stage 2:-Tighten all bolts to 40Nm or 30lb ft.
Stage 3:-Angle tighten all bolts a further 60 degrees.
Stage 4:-Angle tighten all bolts again a further 60 degrees.
Stage 5:- M12 x 140mm bolts ONLY angle tighten a further 20 degrees.
Hope this helps everyone, sorry it seems longwinded but that is how it's written in the manual.

Posted on Feb 07, 2009

  • 1 Answer

SOURCE: i nead torque wrench setting for head bolts and cam bolts

Can anyone help us we need to know what is the setting for the cams in our Kia carnival Classic 2001

Posted on Jul 01, 2009

  • 277 Answers

SOURCE: torque wrench settings for ford focus thermostat

There is a set spec, but for the DIY mechanic,,
Using a !/4 " drive, with the correct long socket, apply a FIRM effort on the wrench, but obviously not too much, as to sheer the studs. Always use a NEW gasket on all mating surfaces.
Regards,DT

Posted on Aug 28, 2009

Testimonial: "a specific torque setting would be better !!"

  • 333 Answers

SOURCE: I need to know the torque wrench settings for

The small bolts holding the caliper to the bracket are 20 ft/lbs
The larger bolts holding the bracket to the hub are 79 ft/lbs

Posted on Sep 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do you know the torque settings for the pressure plate bolts on an unidentified vehicle?


Without the make, model, year... and the reliability of your torque wrench... I'd rather discuss the difficulties involved in reverse drilling and EXTRACTING broken bolts..

Why in the world would I be looking at such a question without a spec of detail(s) on the surrounding vehicle??

Try buying detailed specifications on bolts, grades of steal, micrometers... high end torque wrenches, etc.

Better avenue... repost with the vehicle details... we can give it a serious effort.


http://www.bing.com/search?q=torque+specifications+chart&form=PRDLC1&src=IE11TR&pc=EUPP_DCTE

Mar 24, 2016 | Cars & Trucks

2 Answers

Citreon xsara 1999 1.8 16 valve cylinder head torque settings


If yours is an Xu series engine, you need to use a torque wrench and an angle dial wrench. Tightening is in 3 stages.
  • Stage 1: Tighten up to 60Nm (44 lb/ft) then fully loosen
  • Stage 2: Tighten up to 20Nm (15lb/ft) change to angle dial wrench
  • Stage 3: Angle tighten to 300 deg.
To avoid confusion, do stage 3 in 3 steps, tighten 100 deg each round and repeating the cycle until 3 rounds.

07718717-6a90-48f5-a87c-bc1ff81d67bd.jpg

04a9b611-4f0b-4da6-9052-a1cb2e517c02.jpg

Jun 13, 2014 | 1998 Citroen Xsara 1.6

1 Answer

Timing chain


Loosen the bolts on the front of the camshaft and the crankshaft... slide off the gears (or use a puller if difficult to remove). Replace your chain and gears. Replace with new bolts. Old bolts are slightly stretched from being torqued. The elasticity of the old bolts will not allow the proper torques without breaking or loosening again later. Use an impact wrench that has torque settings. An ordinary torque wrench is difficult to use as the motor wants to turn. Use the torque settings from a list of specifications for your engine.

Nov 13, 2013 | 2001 Pontiac Grand Am SE

2 Answers

I need to replace the alternator on my 1999 dodge intrepid. is this something i can do myself?


that is not a problem follow the steps below
Instructions
Things You'll Need: New alternator Belt tension gauge Socket wrench set Torque wrench 1 Determine which alternator your Dodge Intrepid will need. You'll want to be sure the new alternator is compatible with your Intrepid's engine. Models produced after 1997 are equipped with a 2.7 L EER, 3.2 L or 3.5 L EGJ engine. 2 Disconnect the negative battery cable with a socket wrench and remove the lower plastic splash shield. Drain the transmission fluid and disconnect the lower radiator support. 3 Loosen the "T" bolt, pivot bolt and drive belt adjusting bolt with a socket wrench but do not remove them. This will allow you to disconnect the drive belt. 4 Loosen the terminal nut for the alternator so you can remove the B+ wire. Disconnect the circuit plug for the alternator and remove the pivot bolt, using care not to lose the spacer. Remove the mounting bolts and the alternator assembly. 5 Install the new alternator assembly by reversing the removal procedure. Tighten the terminal nut on the alternator to 89 inch pounds with a torque wrench. Use a belt tension gauge and socket wrench to torque the "T" bolt until the tension on the drive belt is 120 lbs. for a used belt and 180 to 200 lbs. for a new belt. 6 Use a torque wrench to torque the pivot bolt and 10mm mounting bolt to 40 foot pounds. Torque the 8mm mounting bolt to 30 foot pounds.
If you have any problems or need further assistance please let me know. If you found this helpful please feel free to rate the solution. Thanks, Midwest-tek

Aug 31, 2010 | 1999 Dodge Intrepid

1 Answer

Hi can you tell me the torque setting for the cylinder head on a 1995 C200 Mercedes W202 series Thanks Ken


if this is a aluminum head it will be a torque to yeild. you will need brand new head bolts and a torque to yeild wrench, torque to yeild is not a set value but the stretching point of the bolt, wich a torque to yeild wrench will tell you when the bolt is starting to stretch then you stop and torque is achieved. often the starting torque is approx 30pds then you go back through with the torque to yeild wrench. if it has a cast iron head it will have a set value determined by the manufacture which on this car i do not know off hand. I hope i at least led you in the right direction

Mar 18, 2010 | 1995 Mercedes-Benz C-Class

1 Answer

Wheel nut torque wrench settings for Seat Toledo V5 November 2001 model.


14mm bolt 100 ft lbs 12mm bolt 80 ft lbs. if you drive real fast on 14mm bolt I like 120ft lbs

Apr 24, 2009 | 2001 Volkswagen Golf

2 Answers

Torque settings


  1. Tighten the cylinder head bolts sequentially in three steps. NOTE: Perform each step twice. 1st step torque: 39 Nm (4.0 kgf-m, 29 ft. lbs.) 2nd step torque: 69 Nm (7.0 kgf-m, 51 ft. lbs.) 3rd step torque: 98.1 Nm (10.0 kgf-m, 72.3 ft. lbs.) Use a beam-type torque wrench. When using a preset-type torque wrench, be sure to tighten slowly and not to overtighten. If a bolt makes any noise while you are torquing it, loosen the bolt, and retighten it from the first step.

Aug 02, 2008 | 2004 Honda Odyssey

4 Answers

Torque wrench settings


please understand there are a lot of items on a car that require torque settings every thing from the lug nuts to every engine bolt, and transbolt. please be more specific

Jul 03, 2008 | 1999 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...