Question about Nissan Frontier

2 Answers

I have a 2005 Nissan Fronter that goes into limp in mode while driving and wont go over 20 miles per hour. The codes it sets are p0430, p0345, p0605, p0507, p0102 and p0183. why all these codes?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 236 Answers

It all points to the ECM Engine Control Module is bad and should be replaced

Posted on Dec 12, 2016

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 10 Answers

The first thing i would try is check all your earth wire make sure they are clean and grounded well also make sure a good earth link between the eng gbox and the chassis

Posted on Dec 12, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Please help I'm in northern Minnesota driving my 2005 Chevy Trailblazer when all the sudden it won't stop Winding Way up on the RPMs and going slower so I pull over to his stop and now it won't go any...


looks like a sensor has gone or been misread if you stop the engine for awhile like for 20 min and then start up and it runs ok, would think cam sensor has overheated, you will still be able to get home as its in limp mode just means there is no advanced timing this gets turned off. so if it does stay on you will be fine to get home.

Feb 15, 2018 | Cars & Trucks

1 Answer

2002 chrysler sebering wont shift out of low gear


Your car is in limp in mode to prevent further damage to transmission. P0605 Internal TCM error.
TCM= transmission control module.

Aug 24, 2017 | Chrysler Cars & Trucks

1 Answer

I have a 2003 chyrsler 300m it went in limp mode codes p0700. P0340 p0344 p0430 p0888 came up cleared the codes and now it knocks.


clearing codes wont correct the problem and limp mode is designed to protect motor and transmission - p0700 is a transmission problem
P0700 Transmission Control System Malfunction p0340 is camshaft position sensor malfunction
https://www.obd-codes.com/p0340 p0344 is also a camshaft position sensor circuit problem
P0344 Camshaft Position Sensor Circuit Intermittent your p430 is a cat converter problem
https://www.obd-codes.com/p0430 and p0888 is transmission relay problem these reasons are limp mode the knock can be fuel not burning correctly or a lower engine knock can mean you damaged a piston

Nov 08, 2016 | Cars & Trucks

1 Answer

Honda Civic car will not go over 20 miles per hour and doesn't and doesn't go over 3000rpm stopped in park or even driving after 10 miles


This is known as "get me home" mode/limp mode.
It is designed for you to get the car safely to the side of the road. Needs to go to a garage as there is a fault somewhere which will probably need attaching to a computer to investigate.

Aug 16, 2016 | 2002 Honda Civic

1 Answer

My car slowly stalled and will not accelerate past 20 miles per hour. The engine light started blinking.


it is in limp mode
run the fault codes to find the problem, fix the problem then reset the ECM using a scan tool

Apr 28, 2016 | Cars & Trucks

2 Answers

Is in limp mode and wont go above 35 mph


Get an OBDII reader and connect to see what error codes you are getting. Limp mode can be caused by many different things including problems with the transmission.

Dec 19, 2015 | 2007 Chrysler 300

1 Answer

Code P0605 2005 Chrylser Sebring


Has the tranny fluid been changed? sounds like a sticky shift solenoid.

Mar 04, 2014 | Cars & Trucks

1 Answer

Went on trip, drove a little over 500 miles to destination. When went from one freeway to another car seemed to go into a limp mode after slowing to bout 20- 25 mph. I reset by putting it in park turning...


PO456 is most times a gas cap or gasket,
to get an incorrect gear ratio the transmission has probably started to slip.

Change the fluid and filter first off in the transmission and use only atf+4 fluid and possibly the govenor pressure sensor,and change gas cap.

Jun 02, 2010 | 2003 Dodge Intrepid

1 Answer

Saturn V6 2000 model with jerking. I can drive about 4 blocks and then the light pops on and says reduced power and I can go no more than 20 miles per hour if I am going a good speed. The steering wheel...


It is going into limp mode. There is a serious problem somewhere. Could be with the engine or transmission. You need to have the ECU scanned to see why it is going into Limp Mode. I suggest you seek professional help.

Oct 10, 2009 | 2000 Saturn SL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

78238 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...